X-ray Reflectivity Study on Depth Profile of Acid Generator Distribution in Chemically Amplified Resists

The depth profile of acid generator distribution is investigated using X-ray reflectivity measurement at Spring-8. The depth profile in tBu-PHS thin resist films is made clear.

[1]  Wen-Li Wu,et al.  X-ray absorption spectroscopy to probe surface composition and surface deprotection in photoresist films. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[2]  Vivek M. Prabhu,et al.  Proton NMR Determination of Miscibility in a Bulk Model Photoresist System: Poly(4-hydroxystyrene) and the Photoacid Generator, Di(tert-butylphenyl)Iodonium Perfluorooctanesulfonate , 2004 .

[3]  James W. Taylor,et al.  Factors contributing to sidewall roughness in a positive-tone, chemically amplified resist exposed by x-ray lithography , 1999 .

[4]  J. Koberstein.  Molecular design of functional polymer surfaces , 2004 .

[5]  Y. Grohens,et al.  Density Profiles in Thin PMMA Supported Films Investigated by X-ray Reflectometry , 2001 .

[6]  Martha I. Sanchez,et al.  Deep-ultraviolet interferometric lithography as a tool for assessment of chemically amplified photoresist performance , 1998 .

[7]  L. G. Parratt.  Surface Studies of Solids by Total Reflection of X-Rays , 1954 .

[8]  Theoretical Study on Relationship between Acid Generation Efficiency and Acid Generator Concentration in Chemically Amplified Extreme Ultraviolet Resists , 2007 .

[9]  Atsuko Yamaguchi,et al.  Depth Profile and Line-Edge Roughness of Low-Molecular-Weight Amorphous Electron Beam Resists , 2005 .

[10]  H. Fukuda,et al.  Depth profile and line-edge roughness of partially O-1-ethoxyethylated low molecular weight amorphous polyphenol and poly(p-hydroxystyrene) base resists for electron-beam lithography , 2006 .

[11]  Gregg M. Gallatin.  Resist blur and line edge roughness (Invited Paper) , 2004, SPIE Advanced Lithography.

[12]  Scott A. MacDonald,et al.  Acid generation and acid diffusion in photoresist films , 1992, Advanced Lithography.

[13]  C. Willson,et al.  Chemical amplification in the design of dry developing resist materials , 1983 .

[14]  K. Gleason,et al.  Distribution and motion of trifluoromethanesulfonate anions in poly(p-hydroxystyrene) and polystyrene films studied by multiple-quantum NMR , 1993 .

[15]  Jangho Shin,et al.  Resist line edge roughness and aerial image contrast , 2001 .

[16]  Juan J. de Pablo,et al.  Scaling of Tg and reaction rate with film thickness in photoresist: A thermal probe study , 2000 .

[17]  Hiroki Yamamoto,et al.  Potential Cause of Inhomogeneous Acid Distribution in Chemically Amplified Resists for Post Optical Lithography , 2005 .

[18]  Wen-li Wu,et al.  Thin film confinement effects on the thermal properties of model photoresist polymers , 2001 .

[19]  Wen-Li Wu,et al.  Direct Measurement of the Reaction Front in Chemically Amplified Photoresists , 2002, Science.

[20]  M. Sanyal,et al.  Determination of small fluctuations in electron density profiles of thin films: Layer formation in a polystyrene film , 1996 .

[21]  Takahiro Kozawa,et al.  Resolution degradation caused by multispur effect in chemically amplified extreme ultraviolet resists , 2008 .

[22]  A. Jonas,et al.  Density perturbations in polymers near a solid substrate: An X-ray reflectivity study , 1999 .

[23]  Hiroki Yamamoto,et al.  Proton and anion distribution and line edge roughness of chemically amplified electron beam resist , 2005 .

[24]  S. Satija,et al.  Polymer Interdiffusion near an Attractive Solid Substrate , 1997 .