论文信息 - Simple Procedures for Detecting Network Attachment in IPv6

Simple Procedures for Detecting Network Attachment in IPv6

Detecting Network Attachment allows hosts to assess if its existing addressing or routing configuration is valid for a newly connected network. This document provides simple procedures for detecting network attachment in IPv6 hosts, and procedures for routers to support such services.

Suresh Krishnan | Greg Daley

[1] Thomas Narten,et al. Neighbor Discovery for IP Version 6 (IPv6) , 1996, RFC.

[2] Pekka Nikander,et al. SEcure Neighbor Discovery (SEND) , 2005, RFC.

[3] Suresh Krishnan,et al. Link-Layer Event Notifications for Detecting Network Attachments , 2007, RFC.

[4] Scott O. Bradner,et al. Key words for use in RFCs to Indicate Requirement Levels , 1997, RFC.

[5] Thomas Narten,et al. IPv6 Stateless Address Autoconfiguration , 1996, RFC.

[6] Sathya Narayanan,et al. Design Alternative for Detecting Network Attachment in IPv6 Networks (DNAv6 Design Alternative) , 2009 .

[7] Andrew Yourtchenko,et al. Dynamic Host Configuration Protocol for IPv6 (DHCPv6) , 2003, RFC.

[8] Stuart Cheshire,et al. Detecting Network Attachment in IPv4 (DNAv4) , 2006, RFC.