Experimental evidence of the interface/interphase formation between powder coating and composite material

[1]  A. Flores,et al.  Nanoindentation Assessment of the Interphase in Carbon Nanotube-Based Hierarchical Composites , 2012 .

[2]  I. Burgert,et al.  Photochemical synthesis of polymeric fiber coatings and their embedding in matrix material: morphology and nanomechanical properties at the fiber-matrix interface. , 2012, ACS applied materials & interfaces.

[3]  R. Rujiravanit,et al.  Preparation of chitosan-coated polyethylene packaging films by DBD plasma treatment. , 2012, ACS applied materials & interfaces.

[4]  Bandara Dissanayake,et al.  Process Intensification in Particle Technology: Production of Powder Coatings by Nonisothermal Flow-Induced Phase Inversion , 2011 .

[5]  S. Tao,et al.  Effect of the thickness on properties of Al2O3 coatings deposited by plasma spraying , 2011 .

[6]  R. Benedictus,et al.  Surface modification of high performance polymers by atmospheric pressure plasma and failure mechanism of adhesive bonded joints , 2010 .

[7]  S. Agius,et al.  Fracture behaviour of a rapidly cured polyethersulfone toughened carbon fibre/epoxy composite , 2010 .

[8]  A. Margaillan,et al.  Correlation between water diffusion and adhesion loss: Study of an epoxy primer on steel , 2009 .

[9]  I. Mondragon,et al.  Nanoindentation study of interphases in epoxy/amine thermosetting systems modified with thermoplastics. , 2009, Journal of colloid and interface science.

[10]  M. Winnik,et al.  Characterizing interfacial structure of TPO/CPO/TPO adhesive joints by PFM-AFM and SEM , 2009 .

[11]  B. Fox,et al.  Study on thermoplastic-modified multifunctional epoxies: Influence of heating rate on cure behaviour and phase separation , 2009 .

[12]  S. Radhakrishnan,et al.  Epoxy powder coatings containing polyaniline for enhanced corrosion protection , 2009 .

[13]  Soojin Park,et al.  Improvement in fracture behaviors of epoxy resins toughened with sulfonated poly(ether sulfone) , 2007 .

[14]  A. R. Marrion.  The chemistry and physics of coatings , 2007 .

[15]  M. Barletta.  Electrostatic fluidized bed (EFB) coating of heat sensitive and electrical insulating substrates with low-curing thermoset epoxy-polyester (EP) powders , 2006 .

[16]  A. Roncaglia,et al.  Variation in physical and mechanical properties with coating thickness in epoxy-diamine-aluminum system , 2005 .

[17]  W. Stark,et al.  Mechanical gradient interphase by interdiffusion and antiplasticisation effect - study of an epoxy/thermoplastic system , 2005 .

[18]  Rose A. Ryntz,et al.  Coatings Of Polymers And Plastics , 2003 .

[19]  B. Cappella,et al.  Materials Contrasts and Nanolithography Techniques in Scanning Force Microscopy (SFM) and their Application to Polymers and Polymer Composites , 2003 .

[20]  M. Miyazaki,et al.  Analysis of the dentin-resin interface by use of laser Raman spectroscopy. , 2002, Dental materials : official publication of the Academy of Dental Materials.

[21]  B. Lestriez,et al.  Gradient Interphase between Reactive Epoxy and Glassy Thermoplastic from Dissolution Process, Reaction Kinetics, and Phase Separation Thermodynamics , 2001 .

[22]  G. Socrates,et al.  Infrared and Raman characteristic group frequencies : tables and charts , 2001 .

[23]  Anthony J. Kinloch,et al.  The role of the interphase in the environmental failure of adhesive joints , 2000 .

[24]  J. Gillespie,et al.  Diffusion of reacting epoxy and amine monomers in polysulfone: a diffusivity model , 2000 .

[25]  Hiromi Ito,et al.  Improvement of thermal and mechanical properties by control of morphologies in PES-modified epoxy resins , 2000 .

[26]  B. Mele,et al.  Reaction-induced phase separation in polyethersulfone-modified epoxy-amine systems studied by temperature modulated differential scanning calorimetry , 1999 .

[27]  J. Gillespie,et al.  Relationships between stoichiometry, microstructure, and properties for amine-cured epoxies , 1999 .

[28]  C. Plummer,et al.  Fusion bonding of maleic anhydride grafted polypropylene–polyamide 6 blends to polyamide 6 , 1998 .

[29]  Tosko Alexande Misev,et al.  Powder coatings technology: new developments at the turn of the century , 1998 .

[30]  Takashi Inoue.  Reaction-induced phase decomposition in polymer blends , 1995 .

[31]  A. Yee,et al.  Toughening mechanisms in thermoplastic-modified epoxies: 1. Modification using poly(phenylene oxide) , 1993 .

[32]  P. Hendra,et al.  The Raman spectra of polymers , 1993 .

[33]  Frank N. Jones,et al.  Organic Coatings: Science and Technology , 1992 .

[34]  Paul M. Randall,et al.  Pollution prevention methods in the surface coating industry , 1992 .

[35]  Takashi Inoue,et al.  Structure development in epoxy resin modified with poly(ether sulphone) , 1989 .

[36]  Ronald Lambourne,et al.  Paint and surface coatings: theory and practice , 1987 .

[37]  C. Bucknall,et al.  Phase separation in epoxy resins containing polyethersulphone , 1983 .