ε-MnO2 nanostructures directly grown on Ni foam: a cathode catalyst for rechargeable Li-O2 batteries.

A sponge-like ε-MnO2 nanostructure was synthesized by direct growth of ε-MnO2 on Ni foam through a facile electrodeposition route. When applied as a self-supporting, binder-free cathode material for rechargeable nonaqueous lithium-oxygen batteries, the ε-MnO2/Ni electrode exhibits considerable high-rate capability (discharge capacity of ∼6300 mA h g(-1) at a current density of 500 mA g(-1)) and enhanced cyclability (exceeding 120 cycles) without controlling the discharge depth. The superior performance is proposed to be associated with the 3D nanoporous structures and abundant oxygen defects as well as the absence of side reactions related to carbon-based conductive additives and binders.

[1]  Jun Chen,et al.  Metal-air batteries: from oxygen reduction electrochemistry to cathode catalysts. , 2012, Chemical Society reviews.

[2]  T. Jaramillo,et al.  A bifunctional nonprecious metal catalyst for oxygen reduction and water oxidation. , 2010, Journal of the American Chemical Society.

[3]  I. Mezić,et al.  Chaotic Mixer for Microchannels , 2002, Science.

[4]  Feiyu Kang,et al.  Recent progress on manganese dioxide based supercapacitors , 2010 .

[5]  Jun Chen,et al.  Enhancing electrocatalytic oxygen reduction on MnO(2) with vacancies. , 2013, Angewandte Chemie.

[6]  G. Cui,et al.  Molybdenum nitride based hybrid cathode for rechargeable lithium-O2 batteries. , 2011, Chemical communications.

[7]  Yang Shao-Horn,et al.  Influence of Li2O2 morphology on oxygen reduction and evolution kinetics in Li–O2 batteries , 2013 .

[8]  Peter G Bruce,et al.  Alpha-MnO2 nanowires: a catalyst for the O2 electrode in rechargeable lithium batteries. , 2008, Angewandte Chemie.

[9]  Matthias Wessling,et al.  Print your membrane: Rapid prototyping of complex 3D-PDMS membranes via a sacrificial resist , 2015 .

[10]  Jason G. Kralj,et al.  Engineering and analysis of surface interactions in a microfluidic herringbone micromixer. , 2012, Lab on a chip.

[11]  Abraham D Stroock,et al.  Investigation of the staggered herringbone mixer with a simple analytical model , 2004, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[12]  Y. Tong,et al.  Single-crystal ZnO nanorod/amorphous and nanoporous metal oxide shell composites: Controllable electrochemical synthesis and enhanced supercapacitor performances , 2011 .

[13]  Si Hyoung Oh,et al.  Synthesis of a metallic mesoporous pyrochlore as a catalyst for lithium–O2 batteries. , 2012, Nature chemistry.

[14]  P. Bruce,et al.  A Reversible and Higher-Rate Li-O2 Battery , 2012, Science.

[15]  Guangyuan Zheng,et al.  Rechargeable Li–O2 batteries with a covalently coupled MnCo2O4–graphene hybrid as an oxygen cathode catalyst , 2012 .

[16]  Matthias Wessling,et al.  A microgrooved membrane based gas–liquid contactor , 2012 .

[17]  Kwang-Yong Kim,et al.  Evaluation of the mixing performance of three passive micromixers , 2009 .

[18]  N. Lee,et al.  An effective passive microfluidic mixer utilizing chaotic advection , 2008 .

[19]  Biao Zhang,et al.  Mechanisms of capacity degradation in reduced graphene oxide/α-MnO2 nanorod composite cathodes of Li–air batteries , 2013 .

[20]  Matthias Wessling,et al.  Influence of geometrical and operational parameters on the performance of porous catalytic membrane reactors , 2012 .

[21]  V. Hessel,et al.  Micromixers—a review on passive and active mixing principles , 2005 .

[22]  Matthias Wessling,et al.  Modeling of gas–liquid reactions in porous membrane microreactors , 2012 .

[23]  Tao Zhang,et al.  From Li-O2 to Li-air batteries: carbon nanotubes/ionic liquid gels with a tricontinuous passage of electrons, ions, and oxygen. , 2012, Angewandte Chemie.

[24]  Jun Chen,et al.  Nanoporous Catalysts for Rechargeable Li-air Batteries , 2013 .

[25]  Huamin Zhang,et al.  A hierarchical porous electrode using a micron-sized honeycomb-like carbon material for high capacity lithium-oxygen batteries. , 2013, Nanoscale.

[26]  Jing-Tang Yang,et al.  Fluids mixing in devices with connected-groove channels , 2008 .

[27]  Stefan A Freunberger,et al.  The carbon electrode in nonaqueous Li-O2 cells. , 2013, Journal of the American Chemical Society.

[28]  T. Mellan,et al.  Lithium and oxygen adsorption at the β-MnO2 (110) surface , 2013 .

[29]  Dean J. Miller,et al.  In situ fabrication of porous-carbon-supported α-MnO2 nanorods at room temperature: application for rechargeable Li–O2 batteries , 2013 .

[30]  T. Sasaki,et al.  Preparation of protonic layered manganates and their intercalation behavior , 2002 .

[31]  Jun Lu,et al.  Synthesis, Characterization, and Structural Modeling of High‐Capacity, Dual Functioning MnO2 Electrode/Electrocatalysts for Li‐O2 Cells , 2013 .

[32]  Matthias Wessling,et al.  Print your own membrane: direct rapid prototyping of polydimethylsiloxane. , 2014, Lab on a chip.

[33]  Robert W. Black,et al.  Non‐Aqueous and Hybrid Li‐O2 Batteries , 2012 .

[34]  Yang Shao-Horn,et al.  Lithium–oxygen batteries: bridging mechanistic understanding and battery performance , 2013 .

[35]  M. Zheng,et al.  α-MnO2 nanorods grown in situ on graphene as catalysts for Li–O2 batteries with excellent electrochemical performance , 2012 .

[36]  Khalil Amine,et al.  Disproportionation in Li-O2 batteries based on a large surface area carbon cathode. , 2013, Journal of the American Chemical Society.

[37]  Zhe Hu,et al.  Size effect of lithium peroxide on charging performance of Li-O2 batteries. , 2014, Nanoscale.

[38]  Changyu Shen,et al.  3D hierarchically patterned tubular NiSe with nano-/microstructures for Li ion battery design. , 2012, Dalton transactions.

[39]  Matthias Wessling,et al.  Generation of local concentration gradients by gas-liquid contacting. , 2008, Analytical chemistry.

[40]  Matthias Wessling,et al.  Geometrical influence on mixing in helical porous membrane microcontactors , 2011 .

[41]  Detailed evaluation of the performance of microfluidic T mixers using fluorescence and ultraviolet resonance Raman spectroscopy , 2006 .

[42]  Guangyu Zhao,et al.  Hierarchical porous Co3O4 films as cathode catalysts of rechargeable Li-O2 batteries , 2013 .