Convection Heat Transfer and Flow Calculations Suitable for Electric Machines Thermal Models

This paper deals with the formulations used to predict convection cooling and flow in electric machines. Empirical dimensionless analysis formulations are used to calculate convection heat transfer. The particular formulation used is selected to match the geometry of the surface under consideration and the cooling type used. Flow network analysis, which is used to study the ventilation inside the machine, is also presented. In order to focus the discussion using examples, a commercial software package dedicated to motor cooling optimization (Motor-CAD) is considered. This paper provides guidelines for choosing suitable thermal and flow network formulations and setting any calibration parameters used. It may also be considered a reference paper that brings together useful heat transfer and flow formulations that can be successfully applied to thermal analysis of electrical machines.

[1]  P. Lettieri,et al.  An introduction to heat transfer , 2007 .

[2]  D. W. Van de Pol,et al.  Free Convection Nusselt Number for Vertical U-Shaped Channels , 1973 .

[3]  Juan A. Tapia,et al.  Heat Transfer and Thermal Design of Finned Frames for TEFC Variable-Speed Motors , 2008, IEEE Transactions on Industrial Electronics.

[4]  V. Gnielinski.  New equations for heat and mass transfer in turbulent pipe and channel flow , 1976 .

[5]  D. A. Lightband,et al.  The direct current traction motor : its design and characteristics , 1970 .

[6]  S. T. Hsu,et al.  Engineering heat transfer , 1963 .

[7]  Jody J. Nelson,et al.  Fast thermal profiling of power semiconductor devices using Fourier techniques , 2006, IEEE Transactions on Industrial Electronics.

[8]  Geoffrey Ingram Taylor,et al.  Distribution of velocity and temperature between concentric rotating cylinders , 1935 .

[9]  T.G. Habetler,et al.  A Sensorless Rotor Temperature Estimator for Induction Machines Based on Current Harmonic Spectral Estimation Scheme , 2006, 2006 12th International Power Electronics and Motion Control Conference.

[10]  D.A. Staton,et al.  Determination of optimal thermal parameters for brushless permanent magnet motor design , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[11]  A. Boglietti,et al.  Analysis of the Endwinding Cooling Effects in TEFC Induction Motors , 2006, IEEE Transactions on Industry Applications.

[12]  Charles Dingee Jones,et al.  Optimum Arrangement of Rectangular Fins on Horizontal Surfaces for Free-Convection Heat Transfer , 1970 .

[13]  A. Vallan,et al.  Evaluation of radiation thermal resistances in industrial motors , 2005, IEEE Transactions on Industry Applications.

[14]  A. Boglietti,et al.  Solving the more difficult aspects of electric motor thermal analysis in small and medium size industrial induction motors , 2005, IEEE Transactions on Energy Conversion.

[15]  Y. Jaluria,et al.  An Introduction to Heat Transfer , 1950 .

[16]  A. Boglietti,et al.  Determination of Critical Parameters in Electrical Machine Thermal Models , 2007, 2007 IEEE Industry Applications Annual Meeting.

[17]  B. B. Daly.  Woods practical guide to fan engineering , 1978 .

[18]  W. C. Osborne,et al.  Practical guide to fan engineering , 1960 .