Application of Monte Carlo simulation for estimation of uncertainty of four-point roundness measurements of rolls

Abstract Large-scale rotors in the paper and steel industry are called rolls. Rolls are reground at regular intervals and roundness measurements are made throughout the machining process. Measurement systems for roundness and diameter variation of large rolls (diameter

[1]  Petri Kuosmanen,et al.  New material standards for traceability of roundness measurements of large scale rotors , 2014 .

[2]  Petri Kuosmanen,et al.  Predictive 3D roll grinding method for reducing paper quality variations in coating machines , 2010 .

[3]  Bala Muralikrishnan,et al.  Computational Surface and Roundness Metrology , 2008 .

[4]  B. Hemmingb,et al.  Application of Monte Carlo simulation for estimation of uncertainty of four-point roundness measurements of rolls , 2017 .

[5]  J. Tukey,et al.  An algorithm for the machine calculation of complex Fourier series , 1965 .

[6]  G. Wübbeler,et al.  Evaluation of measurement uncertainty and its numerical calculation by a Monte Carlo method , 2008 .

[7]  Harald Bosse,et al.  International comparison of roundness profiles with nanometric accuracy , 1996 .

[8]  David J. Whitehouse,et al.  Handbook of Surface Metrology , 2023 .

[9]  M. Morel,et al.  Task Specific Uncertainty Estimation for Roundness Measurement , 2002 .

[10]  Hideo Kato,et al.  Development of in-situ measuring system of circularity in precision cylindrical grinding , 1990 .

[11]  P M Harris,et al.  On a Monte Carlo method for measurement uncertainty evaluation and its implementation , 2014 .

[12]  Claude Verdier,et al.  Absolute falling-ball viscometer: evaluation of measurement uncertainty , 2005 .

[13]  S. Lieberman,et al.  Fluorescence Rejection in Raman Spectroscopy by Shifted-Spectra, Edge Detection, and FFT Filtering Techniques , 1995 .

[14]  H Han Haitjema.  Revisiting the multi-step method: Enhanced error separation and reduced amount of measurements , 2015 .

[15]  Panu Kiviluoma.  Method and device for in situ runout measurement of calender thermo rolls , 2009 .

[16]  A. Kung,et al.  Calibration of Flick standards , 2012 .

[17]  H Han Haitjema,et al.  Traceability of CMM measurements , 1999 .

[18]  S. Standard.  GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT , 2006 .

[19]  Michael Neugebauer,et al.  Uncertainty analysis for roundness measurements by the example of measurements on a glass hemisphere , 2001 .

[20]  Thomas Widmaier,et al.  Optimisation of the roll geometry for production conditions , 2012 .