Performance analysis of optical vector analyzer based on optical single-sideband modulation

Optical vector network analyzers (OVNAs) based on optical single-sideband (OSSB) modulation are of great interest thanks to the potentially high measurement resolution. However, the measurement accuracy of the OSSB-based OVNA is limited by the high-order sidebands in the OSSB signal. To study the influence of the high-order optical sidebands in OSSB signals on the measurement accuracy, an analytical model is established to present the expression of the measurement error and a numerical simulation is performed. For the OSSB-based OVNA implemented by a 90-deg electrical hybrid coupler and a dual-drive modulator, when the −1st order sideband is fully suppressed by the OSSB modulation, the existence of the +2nd-order sideband severely degrades the resolution of the measurement, while the −3rd and −2nd order sidebands place a restriction on the dynamic range of the measurement. In addition, these sidebands also introduce evident measurement errors to the phase response. The study may provide a good guidance in designing the high performance OVNA.

[1]  Dalma Novak,et al.  Overcoming chromatic-dispersion effects in fiber-wireless systems incorporating external modulators , 1997 .

[2]  A. Loayssa,et al.  Measurement of polarization dependent loss, polarization mode dispersion and group delay of optical components using swept optical single sideband modulated signals , 2008, 2008 International Topical Meeting on Microwave Photonics jointly held with the 2008 Asia-Pacific Microwave Photonics Conference.

[3]  Jianping Yao,et al.  Optical Single Sideband Modulation Using an Ultranarrow Dual-Transmission-Band Fiber Bragg Grating , 2006, IEEE Photonics Technology Letters.

[4]  Wayne V. Sorin,et al.  Elimination of the fibre chromatic dispersion penalty on 1550 nm millimetre-wave optical transmission , 1997 .

[5]  T. Niemi,et al.  Limitations of phase-shift method in measuring dense group delay ripple of fiber Bragg gratings , 2001, IEEE Photonics Technology Letters.

[6]  Generation of Different Modulation Formats Using Sagnac Fiber Loop With One Electroabsorption Modulator , 2008, IEEE Photonics Technology Letters.

[7]  J. Román,et al.  Spectral characterization of fiber gratings with high resolution. , 1998, Optics letters.

[8]  Mikel Sagues,et al.  Spectral characterisation of polarisation dependent loss of optical components using optical single sideband modulation , 2011 .

[9]  Iñigo Salinas,et al.  Stimulated Brillouin scattering gain profile characterization by interaction between two narrow-linewidth optical sources. , 2005, Optics express.

[10]  Shilong Pan,et al.  A high resolution optical vector network analyzer based on a wideband and wavelength-tunable optical single-sideband modulator. , 2012, Optics express.

[11]  Xianmin Zhang,et al.  Optical Single-Sideband Modulation Using a Fiber-Bragg-Grating-Based Optical Hilbert Transformer , 2011, IEEE Photonics Technology Letters.

[12]  Mikel Sagues,et al.  Swept optical single sideband modulation for spectral measurement applications using stimulated Brillouin scattering. , 2010, Optics express.

[13]  G.D. VanWiggeren,et al.  Single-scan interferometric component analyzer , 2003, IEEE Photonics Technology Letters.

[14]  Alayn Loayssa,et al.  Optical vector network analysis based on single-sideband modulation , 2004 .