Vertical comb drive actuator for the measurement of piezoelectric coefficients in small-scale systems

A micro-electro-mechanical systems (MEMS) vertical levitation comb drive actuator has been created for the measurement of piezoelectric coefficients in thin/thick films or piezoelectrically active micro-scale components of other MEMS devices. The device exerts a dynamic force of 33 μN at an applied voltage of 100 V. The charge developed on the piezoelectric test device is measured using a charge sensitive pre-amplifier and lock-in technique, enabling measurements down to 1×10−5 pC. The system was tested with ten different piezoelectric samples with coefficients in the range 70–1375 pC N−1 and showed a good correlation (r = 0.9997) to measurements performed with macroscopic applied stresses, and piezoelectric impedance resonance techniques. The measurement of the direct piezoelectric effect in micro- and nano-scale piezo-materials has been made possible using MEMS processing technology. This new application of a MEMS metrology device has been developed and fully characterized in order to accurately evaluate the functional properties of piezoelectric materials at the scale required in micro- to nano-scale applications.

[1]  P. Muralt,et al.  Piezoelectric response of thin films determined by charge integration technique : Substrate bending effects , 2003 .

[2]  Dragan Damjanovic.  LOGARITHMIC FREQUENCY DEPENDENCE OF THE PIEZOELECTRIC EFFECT DUE TO PINNING OF FERROELECTRIC-FERROELASTIC DOMAIN WALLS , 1997 .

[3]  S. Trolier-McKinstry,et al.  Microelectromechanical systems (MEMS) accelerometers using lead zirconate titanate thick films , 2002, IEEE Electron Device Letters.

[4]  Robert G. Azevedo,et al.  Dual-mode temperature compensation for a comb-driven MEMS resonant strain gauge , 2008 .

[5]  G. Dormans,et al.  Measurement of piezoelectric coefficients of ferroelectric thin films , 1994 .

[6]  P. Weaver,et al.  Correlation of electron backscatter diffraction and piezoresponse force microscopy for the nanoscale characterization of ferroelectric domains in polycrystalline lead zirconate titanate , 2010 .

[7]  S. Trolier-McKinstry,et al.  Thin Film Piezoelectrics for MEMS , 2004 .

[8]  D. A. Hook,et al.  Levitation compensation method for dynamic electrostatic comb-drive actuators , 2008 .

[9]  Wei Huang,et al.  Analysis of lateral instability of in-plane comb drive MEMS actuators based on a two-dimensional model , 2004 .

[10]  Slawomir Wiak,et al.  Numerical modeling of 3‐D comb drive electrostatic accelerometers structure (method of levitation force reduction) , 2009 .

[11]  Karabi Biswas,et al.  MEMS Capacitive Accelerometers , 2007 .

[12]  Kai Liu,et al.  The development of micro-gyroscope technology , 2009 .

[14]  Tjerk H. Oosterkamp,et al.  A sensitive electronic capacitance measurement system to measure the comb drive motion of surface micromachined MEMS devices , 2007 .

[15]  Dragan Damjanovic,et al.  STRESS AND FREQUENCY DEPENDENCE OF THE DIRECT PIEZOELECTRIC EFFECT IN FERROELECTRIC CERAMICS , 1997 .

[16]  James F. Scott,et al.  Settling the “Dead Layer” Debate in Nanoscale Capacitors , 2009, Advanced materials.

[17]  A. Tagantsev,et al.  Fatigued state of the Pt-PZT-Pt system , 1997 .

[18]  Srinivas Tadigadapa,et al.  Piezoelectric MEMS sensors: state-of-the-art and perspectives , 2009 .

[19]  Markys G. Cain,et al.  Verified finite element simulation of multiferroic structures: Solutions for conducting and insulating systems , 2008 .

[20]  Karen Willcox,et al.  Kinetics and kinematics for translational motions in microgravity during parabolic flight. , 2009, Aviation, space, and environmental medicine.

[21]  J. Nye.  Physical Properties of Crystals: Their Representation by Tensors and Matrices , 1957 .

[22]  Madan Dubey,et al.  Mitigation of residual film stress deformation in multilayer microelectromechanical systems cantilever devices , 2003 .

[23]  David Vanderbilt,et al.  Enhancement of ferroelectricity at metal-oxide interfaces. , 2008, Nature materials.

[24]  Q. Wahab,et al.  New materials for micro-scale sensors and actuators An engineering review , 2007 .

[25]  William C. Tang,et al.  Electrostatic Comb Drive Levitation And Control Method , 1992 .

[26]  Madan Dubey,et al.  Surface micromachined piezoelectric resonant beam filters , 2001 .

[27]  S. Beeby,et al.  Energy harvesting vibration sources for microsystems applications , 2006 .

[28]  Giovanni Pennelli,et al.  Analysis, testing and optimisation of electrostatic comb-drive levitational actuators , 2006 .

[29]  Yunn-Shiuan Liao,et al.  An alternatively efficient method (DBEM) for simulating the electrostatic field and levitating force of a MEMS combdrive , 2004 .

[30]  P. Krulevitch,et al.  Vertical-actuated electrostatic comb drive with in situ capacitive position correction for application in phase shifting diffraction interferometry , 2003 .

[31]  Chengjie Zuo,et al.  1.05-GHz CMOS oscillator based on lateral- field-excited piezoelectric AlN contour- mode MEMS resonators , 2010, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[32]  Paul Muralt,et al.  Ferroelectric thin films for micro-sensors and actuators: a review , 2000 .

[33]  Yunn-Shiuan Liao,et al.  Computational study of the effect of finger width and aspect ratios for the electrostatic levitating force of MEMS combdrive , 2005 .

[34]  D. Guo,et al.  Coupled Simulative Analysis for Drive Characteristic of Micro-Comb Structure , 2009 .

[35]  Gabriel M. Rebeiz,et al.  RF MEMS switches and switch circuits , 2001 .

[36]  W. Merlijn van Spengen,et al.  A method to extract the lateral and normal components of motion from the capacitance change of a moving MEMS comb drive , 2007 .