论文信息 - Nitride-based near-ultraviolet light emitting diodes with meshed p-GaN

Nitride-based near-ultraviolet light emitting diodes with meshed p-GaN

This investigation presents nitride-based near ultraviolet light emitting diodes (LEDs) with a meshed p‐GaN layer. With 20mA injection current, it was found that forward voltages were 3.33 and 3.39V while output powers were 9.0 and 10.6mW for the meshed indium-tin-oxide (ITO) LED and meshed p‐GaN LED, respectively. The larger LED output power is attributed to increased light extraction efficiency.

[1] Improvement of near-ultraviolet nitride-based light emitting diodes with mesh indium tin oxide contact layers , 2006 .

[2] T. Wen,et al. 400-nm InGaN-GaN and InGaN-AlGaN multiquantum well light-emitting diodes , 2002 .

[3] Selective wet etching of p-GaN for efficient GaN-based light-emitting diodes , 2006 .

[4] S. Denbaars,et al. Increase in the extraction efficiency of GaN-based light-emitting diodes via surface roughening , 2004 .

[5] Nitride-based light-emitting diodes with p-AlInGaN surface layers , 2005 .

[6] S. Nakamura,et al. Current and Temperature Dependences of Electroluminescence of InGaN-Based UV/Blue/Green Light-Emitting Diodes , 1998 .

[7] J. Sheu,et al. Nitride-based LEDs with an SPS tunneling contact Layer and an ITO transparent contact , 2004, IEEE Photonics Technology Letters.

[8] S. Nakamura,et al. Characteristics of InGaN-Based UV/Blue/Green/Amber/Red Light-Emitting Diodes , 1999 .

[9] Takashi Mukai,et al. InGaN-Based Near-Ultraviolet and Blue-Light-Emitting Diodes with High External Quantum Efficiency Using a Patterned Sapphire Substrate and a Mesh Electrode , 2002 .

[10] Ki-Dong Lee,et al. Improvement of light extraction efficiency of flip-chip light-emitting diode by texturing the bottom side surface of sapphire substrate , 2006, IEEE Photonics Technology Letters.

[11] S. Chang,et al. Nitride-based near-ultraviolet LEDs with an ITO transparent contact , 2004 .