Correlation of Hybrid Rocket Propellant Regression Measurements with Enthalpy-Balance Model Predictions

An enthalpy-balance fuel-grain regression model is presented. The regression model, based on the longitudinally averaged fuel recession rates, is shown to accurately predict the chamber pressure, thrust and specific impulse performance of small and medium scale hybrid rocket motors. The key to the model predictions is the longitudinal enthalpy balance between the fuel grain heat of ablation and the convective heat transfer from the flame zone to the model surface. Convective heat transfer is related to the surface skin friction using the Reynolds analogy for turbulent flow. Simple flat plate models are used to predict the longitudinally averaged skin friction coefficient. Chemical properties of the combustion products were evaluated using the NASA Computer Equilibrium with Applications (CEA) Combustion code. Model predictions for a nitrous oxide (N 2 O) and hydroxylterminated poly butadiene (HTPB) motor are compared to data from a small-scale test firing with a 10.2-cm diameter motor. Suggestions for model improvements are offered.

[1]  Sanford Gordon,et al.  Computer program for calculation of complex chemical equilibrium compositions , 1972 .

[2]  Peter Harriott,et al.  Unit Operations of Chemical Engineering , 2004 .

[3]  I-Shih Chang.  Investigation of space launch vehicle catastrophic failures , 1995 .

[4]  P. Estey,et al.  An evaluation of scaling effects for hybrid rocket motors , 1991 .

[5]  E. Schnedler.  The calculation of complex chemical equilibria , 1984 .

[6]  N. Wingborg.  Increasing the tensile strength of HTPB with different isocyanates and chain extenders , 2002 .

[7]  I-Shih Chang.  Investigation of space launch vehicle catastrophic failures , 1996 .

[8]  G. Cheng,et al.  Numerical simulation of the internal ballistics of a hybrid rocket motor , 1994 .

[9]  F. White.  Viscous Fluid Flow , 1974 .

[10]  A.J. Marchese.  Work In Progress: This is Rocket Science: Development and Testing of a Hybrid Rocket Motor in a Rocket Propulsion Course , 2006, Proceedings. Frontiers in Education. 36th Annual Conference.

[11]  George C. Harting,et al.  Regression-Rate and Heat-Transfer Correlations for Hybrid Rocket Combustion , 2001 .

[12]  Elmo J. Mottard,et al.  Average skin-friction drag coefficients from tank tests of a parabolic body of revolution (NACA RM-10) , 1954 .

[13]  J. Whitelaw,et al.  Convective heat and mass transfer , 1966 .

[14]  G. Marxman,et al.  Turbulent boundary layer combustion in the hybrid rocket , 1963 .

[15]  H. Seifert,et al.  Rocket Propulsion Elements , 1963 .

[16]  J. Bendat,et al.  Random Data: Analysis and Measurement Procedures , 1971 .

[17]  C. E. Wooldridge,et al.  Fundamentals of Hybrid Boundary-Layer Combustion , 1964 .

[18]  L. D. Strand,et al.  Hybrid rocket combustion study , 1993 .