Superior wear resistance in a TaMoNb compositionally complex alloy film via in-situ formation of the amorphous-crystalline nanocomposite layer and gradient nanostructure
暂无分享,去创建一个
Wanting Sun | F. Ren | Dingshan Liang | Jiasi Luo | Xuelin Yang | K. Chan | Fuzeng Ren
[1] Guilin Wu,et al. Tribological properties of high-entropy alloys: A review , 2022, International Journal of Minerals, Metallurgy and Materials.
[2] M. Anastasescu,et al. Electrodeposition, Characterization, and Corrosion Behavior of CoCrFeMnNi High-Entropy Alloy Thin Films , 2021, Coatings.
[3] Wanting Sun,et al. Laser surface treatment-introduced gradient nanostructured TiZrHfTaNb refractory high-entropy alloy with significantly enhanced wear resistance , 2021, Journal of Materials Science & Technology.
[4] M. Herbig,et al. Reactive wear protection through strong and deformable oxide nanocomposite surfaces , 2021, Nature Communications.
[5] S. Mukherjee,et al. Deformation and tribological behavior of ductile refractory high-entropy alloys , 2021 .
[6] M. Nastasi,et al. Strength, plasticity, thermal stability and strain rate sensitivity of nanograined nickel with amorphous ceramic grain boundaries , 2021 .
[7] M. Nastasi,et al. Strength and plasticity of amorphous ceramics with self-patterned nano-heterogeneities , 2020 .
[8] F. Ren,et al. Significant reduction in friction and wear of a high-entropy alloy via the formation of self-organized nanolayered structure , 2020 .
[9] Hong Wu,et al. Microstructure evolution and deformation mechanism of amorphous/crystalline high-entropy-alloy composites , 2020 .
[10] Jian Lu,et al. Crystal–Glass High‐Entropy Nanocomposites with Near Theoretical Compressive Strength and Large Deformability , 2020, Advanced materials.
[11] Z. Jiao,et al. Achieving exceptional wear resistance in a compositionally complex alloy via tuning the interfacial structure and chemistry , 2020 .
[12] A. Vomiero,et al. Synthesis and Mechanical Characterization of a CuMoTaWV High-Entropy Film by Magnetron Sputtering , 2020, ACS applied materials & interfaces.
[13] F. Ren,et al. Significantly Enhanced Wear Resistance of an Ultrafine-Grained CrFeNi Medium-Entropy Alloy at Elevated Temperatures , 2020, Metallurgical and Materials Transactions A.
[14] C. Liu,et al. High hardness and fatigue resistance of CoCrFeMnNi high entropy alloy films with ultrahigh-density nanotwins , 2020 .
[15] Chang Liu,et al. Hierarchical nanostructured aluminum alloy with ultrahigh strength and large plasticity , 2019, Nature Communications.
[16] Guojun Zhang,et al. Size dependent phase transformation and mechanical behaviors in nanocrystalline Ta thin films , 2019, International Journal of Refractory Metals and Hard Materials.
[17] X. An,et al. Significance of stacking fault energy in bulk nanostructured materials: Insights from Cu and its binary alloys as model systems , 2019, Progress in Materials Science.
[18] Wei Li,et al. Formation of a self-lubricating layer by oxidation and solid-state amorphization of nano-lamellar microstructures during dry sliding wear tests , 2019, Acta Materialia.
[19] Xiang Chen,et al. Friction and Wear Reduction in Copper with a Gradient Nano-grained Surface Layer. , 2018, ACS applied materials & interfaces.
[20] G. Kermouche,et al. Brittle to ductile transition of tribomaterial in relation to wear response at high temperatures , 2017 .
[21] Karin A. Dahmen,et al. Fundamental deformation behavior in high-entropy alloys: An overview , 2017 .
[22] Jing Li,et al. Effects of nanotwins on the mechanical properties of AlxCoCrFeNi high entropy alloy thin films , 2017 .
[23] E. Georgatis,et al. Microstructural features and dry - Sliding wear response of MoTaNbZrTi high entropy alloy , 2017 .
[24] Jian Lu,et al. Dual-phase nanostructuring as a route to high-strength magnesium alloys , 2017, Nature.
[25] A. Lekatou,et al. Dry‐Sliding Wear Response of MoTaWNbV High Entropy Alloy , 2017 .
[26] Xiang Chen,et al. Lowering coefficient of friction in Cu alloys with stable gradient nanostructures , 2016, Science Advances.
[27] Oleg N. Senkov,et al. Microstructure and properties of a refractory high-entropy alloy after cold working , 2015 .
[28] R. Spolenak,et al. Ultrastrong ductile and stable high-entropy alloys at small scales , 2015, Nature Communications.
[29] Daniel B. Miracle,et al. Microstructure and Properties of Aluminum-Containing Refractory High-Entropy Alloys , 2014, JOM.
[30] C. Rynio,et al. The evolution of tribolayers during high temperature sliding wear , 2014 .
[31] R. Averback,et al. Sliding wear-induced chemical nanolayering in Cu–Ag, and its implications for high wear resistance , 2014 .
[32] Rui Vilar,et al. Thermal stability and oxidation resistance of laser clad TiVCrAlSi high entropy alloy coatings on Ti–6Al–4V alloy , 2011 .
[33] Xianjue Chen,et al. Solute diffusion during high-temperature plastic deformation in alloys , 2011 .
[34] D. Miracle,et al. Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys , 2011 .
[35] Christopher A. Schuh,et al. Sliding wear of nanocrystalline Ni-W: Structural evolution and the apparent breakdown of Archard scaling , 2010 .
[36] P. Blau. Elevated-temperature tribology of metallic materials , 2010 .
[37] A. Hamza,et al. Ductile crystalline–amorphous nanolaminates , 2007, Proceedings of the National Academy of Sciences.
[38] M. Nagumo,et al. The effect of hydrogen on vacancy generation in iron by plastic deformation , 2006 .
[39] A. Erdemir. A crystal chemical approach to the formulation of self-lubricating nanocomposite coatings , 2005 .
[40] H. V. Swygenhoven,et al. Intergranular fracture in nanocrystalline metals , 2002 .
[41] F. Stott. High-temperature sliding wear of metals , 2002 .
[42] G. Palumbo,et al. THE EFFECT OF GRAIN SIZE ON THE WEAR PROPERTIES OF ELECTRODEPOSITED NANOCRYSTALLINE NICKEL COATINGS , 2001 .
[43] K. Samwer,et al. Texture and phase transformation of sputter-deposited metastable Ta films and Ta/Cu multilayers , 1996 .
[44] Z. Farhat,et al. Effect of grain size on friction and wear of nanocrystalline aluminum , 1996 .
[45] G. Das. A new structure of sputtered tantalum , 1972 .
[46] A. Ruoff,et al. On Strain‐Enhanced Diffusion in Metals. I. Point Defect Models , 1963 .
[47] J. Archard. Contact and Rubbing of Flat Surfaces , 1953 .
[48] G. Jin,et al. Measurement for mechanical behavior and fatigue property of Cu films by nanoscale dynamic load method , 2015 .
[49] H. D. Manesh,et al. Wear characteristics of severely deformed aluminum sheets by accumulative roll bonding (ARB) process , 2011 .
[50] A. Erdemir. A crystal-chemical approach to lubrication by solid oxides , 2000 .