Greenhouse Gas Emission Reduction Using Advanced Heat Integration Techniques
暂无分享,去创建一个
[1] Bodo Linnhoff,et al. A User guide on process integration for the efficient use of energy , 1994 .
[2] Ignacio E. Grossmann,et al. A structural optimization approach in process synthesis. II: Heat recovery networks , 1983 .
[3] Ignacio E. Grossmann,et al. A structural optimization approach in process synthesis—I: Utility systems , 1983 .
[4] B. Linnhoff,et al. Sensitivity tables for the design of flexible processes (1) ― How much contingency in heat exchanger networks is cost-effective? , 1986 .
[5] Christodoulos A. Floudas,et al. Synthesis of flexible heat exchanger networks for multiperiod operation , 1986 .
[6] Christodoulos A. Floudas,et al. A comprehensive optimization model of the heat exchanger network retrofit problem , 1990 .
[7] Ignacio E. Grossmann,et al. Simultaneous optimization models for heat integration—I. Area and energy targeting and modeling of multi-stream exchangers , 1990 .
[8] Zdravko Kravanja,et al. Simultaneous optimization models for heat integration. , 1990 .
[9] Ignacio E. Grossmann,et al. Simultaneous optimization models for heat integration—II. Heat exchanger network synthesis , 1990 .
[10] L. T. Fan,et al. Distributed strategy for integration of process design and control: A knowledge engineering approach to the incorporation of controllability into exchanger network synthesis , 1992 .
[11] Bodo Linnhoff,et al. Targeting for CO2 emissions for Total Sites , 1993 .
[12] Bodo Linnhoff,et al. Distillation column targets , 1993 .
[13] Bodo Linnhoff,et al. Total site targets for fuel, co-generation, emissions, and cooling , 1993 .
[14] Efstratios N. Pistikopoulos,et al. Synthesis and Retrofit Design of Operable Heat Exchanger Networks. 1. Flexibility and Structural Controllability Aspects , 1994 .
[15] William L. Luyben,et al. Capacity-Based Economic Approach for the Quantitative Assessment of Process Controllability during the Conceptual Design Stage , 1995 .
[16] Alan P. Rossiter. Waste minimization through process design , 1995 .
[17] J. P. Gong,et al. A Simplified System Model for Rapid Evaluation of Disturbance Propagation through a Heat Exchanger Network , 1996 .
[18] G. Towler,et al. Refinery hydrogen management: Cost analysis of chemically-integrated facilities , 1996 .
[19] Luis Puigjaner,et al. Targeting and design methodology for reduction of fuel, power and CO2 on total sites , 1997 .
[20] Uğur Akman,et al. Centralized and decentralized control of retrofit heat-exchanger networks , 1997 .
[21] Warren D. Seider,et al. Product and Process Design Principles: Synthesis, Analysis, and Evaluation , 1998 .
[22] Helen H. Lou,et al. Steady State Disturbance Propagation Modelling of Heat Integrated Distillation Processes , 2000 .
[23] Yinlun Huang,et al. Cost-Effective Bypass Design of Highly Controllable Heat-Exchanger Networks , 2001 .
[24] Helen H. Lou,et al. Rapid Prediction of Disturbance Propagation in a Non-Sharp Ternary Separation System , 2002 .
[25] Kevin C. Furman,et al. A Critical Review and Annotated Bibliography for Heat Exchanger Network Synthesis in the 20th Century , 2002 .
[26] Mahmoud M. El-Halwagi,et al. RIGOROUS GRAPHICAL TARGETING FOR RESOURCE CONSERVATION VIA MATERIAL RECYCLE/REUSE NETWORKS , 2003 .
[27] Helen H. Lou,et al. A Structural Disturbance Propagation Model for the Conceptual Design of Highly Controllable Heat-Integrated Reaction Systems , 2005 .
[28] T. Zhelev. On the integrated management of industrial resources incorporating finances , 2005 .
[29] Quan-Zhong Yan,et al. Synthesis of Highly Controllable Heat Integration Systems , 2006 .
[30] Dominic C.Y. Foo,et al. Pinch analysis approach to carbon-constrained energy sector planning , 2007 .
[31] Toshko Zhelev,et al. Emissions targeting and planning: An application of CO2 emissions pinch analysis (CEPA) to the Irish electricity generation sector , 2008 .
[32] Igor Bulatov,et al. Integrating waste and renewable energy to reduce the carbon footprint of locally integrated energy sectors , 2008 .
[33] Denny K. S. Ng,et al. Carbon and footprint-constrained energy planning using cascade analysis technique , 2008 .
[34] Denny K. S. Ng,et al. Extended pinch targeting techniques for carbon-constrained energy sector planning , 2009 .
[35] Kazuo Matsuda,et al. Applying heat integration total site based pinch technology to a large industrial area in Japan to further improve performance of highly efficient process plants , 2009 .
[36] Stanislaw Sieniutycz,et al. Heat exchanger network synthesis , 2013 .