论文信息 - Reducing power bus impedance at resonance with lossy components

Reducing power bus impedance at resonance with lossy components

Power bus structures in printed circuit boards with solid power and ground planes exhibit resonances. When the power bus is resonant, the power bus impedance can increase dramatically. This paper explores the effect of component equivalent series resistance (ESR) on power bus resonances. General guidelines for selecting an optimum ESR are provided and are supported by laboratory measurements and numerical simulations.

Todd H. Hubing | Theodore M. Zeeff

[1] Minjia Xu,et al. MODELING PRINTED CIRCUIT BOARDS WITH EMBEDDED DECOUPLING CAPACITANCE , 2001 .

[2] Larry D. Smith,et al. Power distribution system design methodology and capacitor selection for modern CMOS technology , 1999 .

[3] Kai Fong Lee,et al. Advances in microstrip and printed antennas , 1997 .

[4] James L. Drewniak,et al. Power bus decoupling on multilayer printed circuit boards , 1995 .

[5] I. Novak. Reducing simultaneous switching noise and EMI on ground/power planes by dissipative edge termination , 1999 .

[6] J. R. James,et al. Microstrip Antenna Theory and Design , 1981 .

[7] Constantine A. Balanis,et al. Antenna Theory: Analysis and Design , 1982 .

[8] James L. Drewniak,et al. Modeling power bus decoupling on multilayer printed circuit boards , 1994, Proceedings of IEEE Symposium on Electromagnetic Compatibility.

[9] D. Guha. Microstrip and printed antennas : recent trends and developments , 2003, 6th International Conference on Telecommunications in Modern Satellite, Cable and Broadcasting Service, 2003. TELSIKS 2003..

[10] Todd H. Hubing,et al. The Role of Decoupling Capacitor ESR in Resonance Suppression , 2001 .