The 2010 MW 6.8 Yushu (Qinghai, China) earthquake: Constraints provided by InSAR and body wave seismology

[1] By combining observations from satellite radar, body wave seismology and optical imagery, we have determined the fault segmentation and sequence of ruptures for the 2010 Mw 6.8 Yushu (China) earthquake. We have mapped the fault trace using displacements from SAR image matching, interferometric phase and coherence, and 2.5 m SPOT-5 satellite images. Modeling the event as an elastic dislocation with three segments fitted to the fault trace suggests that the southeast and northwest segments are near vertical, with the central segment dipping 70° to the southwest; slip occurs mainly in the upper 10 km, with a maximum slip of 1.5 m at a depth of 4 km on the southeastern segment. The maximum slip in the top 1 km (i.e., near surface) is up to 1.2 m, and inferred locations of significant surface rupture are consistent with displacements from SAR image matching and field observations. The radar interferograms show rupture over a distance of almost 80 km, much larger than initial seismological and field estimates of the length of the fault. Part of this difference can be attributed to slip on the northwestern segment of the fault being due to an Mw 6.1 aftershock two hours after the main event. The remaining difference can be explained by a non-uniform slip distribution with much of the moment release occurring at depths of less than 10 km. The rupture on the central and southeastern segments of the fault in the main shock propagated at a speed of 2.5 km/s southeastward toward the town of Yushu located at the end of this segment, accounting for the considerable building damage. Strain accumulation since the last earthquake on the fault segment beyond Yushu is equivalent to an Mw 6.5 earthquake.

[1]  Andrew Jarvis,et al.  Hole-filled SRTM for the globe Version 4 , 2008 .

[2]  Xi-wei Xu,et al.  Average slip-rate and recent large earthquake ruptures along the Garzê-Yushu fault , 2003, Science in China Series D Earth Sciences.

[3]  Walter H. F. Smith,et al.  New, improved version of generic mapping tools released , 1998 .

[4]  P. Molnar,et al.  Fault plane solutions of earthquakes and active tectonics of the Tibetan Plateau and its margins , 1989 .

[5]  C. W. Chen,et al.  Network approaches to two-dimensional phase unwrapping: intractability and two new algorithms. , 2000, Journal of the Optical Society of America. A, Optics, image science, and vision.

[6]  D. Wells,et al.  New empirical relationships among magnitude, rupture length, rupture width, rupture area, and surface displacement , 1994, Bulletin of the Seismological Society of America.

[7]  P. Rosen,et al.  Updated repeat orbit interferometry package released , 2004 .

[8]  Zhenhong Li,et al.  The 1998 Mw 5.7 Zhangbei‐Shangyi (China) earthquake revisited: A buried thrust fault revealed with interferometric synthetic aperture radar , 2008 .

[9]  Y. Okada.  Internal deformation due to shear and tensile faults in a half-space , 1992, Bulletin of the Seismological Society of America.

[10]  Tim J. Wright,et al.  Fault slip in the 1997 Manyi, Tibet earthquake from linear elastic modelling of InSAR displacements , 2007 .

[11]  Tim J. Wright,et al.  Interseismic slip rate of the northwestern Xianshuihe fault from InSAR data , 2009 .

[12]  Russell C. Eberhart,et al.  A new optimizer using particle swarm theory , 1995, MHS'95. Proceedings of the Sixth International Symposium on Micro Machine and Human Science.

[13]  J. MILNE.  Recent Earthquakes , Nature.

[14]  Robert McCaffrey,et al.  SYN3: A Program for Inversion of Teleseismic Body Wave Forms on Microcomputers , 1988 .

[15]  Yun‐tai Chen,et al.  Fast inversion of rupture process of the 14 April 2010 Yushu, Qinghai, earthquake , 2010 .

[16]  James Jackson,et al.  Seismotectonic, rupture process, and earthquake-hazard aspects of the 2003 December 26 Bam, Iran, earthquake , 2006 .

[17]  Eric J. Fielding,et al.  Displacement field and slip distribution of the 2005 Kashmir earthquake from SAR imagery , 2006 .

[18]  Zhenhong Li,et al.  A novel hybrid PSO/simplex algorithm for determining earthquake source parameters using InSAR observations , 2010 .

[19]  Y. Ran,et al.  The MS7.1 Yushu earthquake surface rupture and large historical earthquakes on the Garzê-Yushu Fault , 2010 .

[20]  James Jackson,et al.  Surface displacements and source parameters of the 2003 Bam (Iran) earthquake from Envisat advanced synthetic aperture radar imagery , 2005 .

[21]  M. Taylor,et al.  Active structures of the Himalayan-Tibetan orogen and their relationships to earthquake distribution, contemporary strain field, and Cenozoic volcanism , 2009 .

[22]  Jean Taboury,et al.  Measuring ground displacements from SAR amplitude images: Application to the Landers Earthquake , 1999 .

[23]  Zhong Lu,et al.  Source model for the Mw 6.7, 23 October 2002, Nenana Mountain Earthquake (Alaska) from InSAR , 2003 .

[24]  Yann Klinger,et al.  Coseismic deformation of the 2001 Mw = 7.8 Kokoxili earthquake in Tibet, measured by synthetic aperture radar interferometry , 2005 .

[25]  James Jackson,et al.  The 1994 Sefidabeh (eastern Iran) earthquakes revisited: new evidence from satellite radar interferometry and carbonate dating about the growth of an active fold above a blind thrust fault , 2006 .

[26]  Peizhen Zhang,et al.  Present‐day crustal motion within the Tibetan Plateau inferred from GPS measurements , 2007 .

[27]  E. Haghshenas,et al.  Some insight on why Bam (Iran) was destroyed by an earthquake of relatively moderate size , 2006 .

[28]  John A. Nelder,et al.  A Simplex Method for Function Minimization , 1965, Comput. J..

[29]  Rowena B. Lohman,et al.  Some thoughts on the use of InSAR data to constrain models of surface deformation: Noise structure and data downsampling , 2005 .