A nanoparticle catalyst with superior activity for electrooxidation of formic acid

This paper reports the synthesis and characterization of a series of Pt-based nanoparticle catalysts with high activity for formic acid electrooxidation. The catalysts were prepared using spontaneous deposition to decorate platinum nanoparticles with controlled amounts of palladium and palladium/ruthenium. Among all the catalysts investigated, the Pt/Pd catalyst shows the best performance; the steady-state formic acid oxidation current is ca. at 0.27 V vs. RHE. This current is two orders of magnitude higher than that obtained from pure platinum, and the catalyst is ideally suited to be an anode in the direct oxidation formic acid fuel cell. The enhancement in formic acid oxidation by the admetal addition does not correlate with the threshold for CO oxidative stripping (the CO tolerance). The Pt/Pd catalyst requires the highest potential to remove the CO, yet it is the most active. We suggest, therefore, that within the dual path mechanism of formic acid oxidation, the direct CO2 formation channel on Pt/Pd is much less affected by the CO chemisorption than on Pt, or on the Pt/Pd/Ru catalyst, also studied in this report.

[1]  Shigang Sun,et al.  Surface modification and electrocatalytic properties of Pt(100), Pt(110), Pt(320) and Pt(331) electrodes with Sb towards HCOOH oxidation , 2001 .

[2]  V. Climent,et al.  Anion adsorption on Pd-Pt(111) electrodes in sulphuric acid solution , 2001 .

[3]  A. Aldaz,et al.  Poison formation reaction from formic acid on Pt(100) electrodes modified by irreversibly adsorbed bismuth and antimony , 1994 .

[4]  M. Watanabe,et al.  Electrocatalysis by AD-atoms: Part XIII. Preparation of ad-electrodes with tin ad-atoms for methanol, formaldehyde and formic acid fuel cells , 1985 .

[5]  C. Lamy,et al.  Electrocatalytic oxidation of small organic molecules at platinum single crystals , 1991 .

[6]  A. Wiȩckowski,et al.  Formic Acid Decomposition on Polycrystalline Platinum and Palladized Platinum Electrodes , 1999 .

[7]  C. Lamy,et al.  Formic acid oxidation on single crystal platinum electrodes. Comparison with polycrystalline platinum , 1981 .

[8]  M. Watanabe,et al.  Electrocatalysis by ad-atoms: Part XXIII. Design of platinum ad-electrodes for formic acid fuel cells with ad-atoms of the IVth and the Vth groups , 1988 .

[9]  E. Leiva,et al.  Effect of adatoms in the electrocatalysis of HCOOH oxidation. A theoretical model , 1997 .

[10]  A. Capon,et al.  The oxidation of formic acid at noble metal electrodes: I. Review of previous work , 1973 .

[11]  B. Conway,et al.  "Third Body" Effect in the Auto-Inhibition of Formic Acid Oxidation at Electrodes , 1978 .

[12]  A. Jansen,et al.  Lattice gas model for CO electrooxidation on Pt-Ru bimetallic surfaces , 1999 .

[13]  A. Aldaz,et al.  Oxidation of formic acid on Pt(100) electrodes modified by irreversibly adsorbed tellurium , 1995 .

[14]  A. Wiȩckowski,et al.  Comparative study of adsorption and oxidation of formic acid and methanol on platinized electrodes in acidic solution , 1975 .

[15]  D. Tryk,et al.  Electrochemical behavior of nitromethane and its influence on the electro-oxidation of formic acid: an on-line MS study , 1994 .

[16]  Roger Parsons,et al.  The oxidation of formic acid at noble metal electrodes Part III. Intermediates and mechanism on platinum electrodes , 1973 .

[17]  D. Kolb,et al.  Formic Acid Oxidation on Ultrathin Pd Films on Au(hkl) and Pt(hkl) Electrodes , 1996 .

[18]  S. Brummer,et al.  ELECTROCHEMISTRY OF FUEL CELL ELECTRODES. (A) GALVANOSTATIC STUDIES OF CARBON MONOXIDE ADSORPTION ON PLATINUM ELECTRODES. (B) COMPARISON OF ADSORBED FORMIC ACID AND CARBON MONOXIDE ON PLATINUM ELECTRODES , 1964 .

[19]  X. Xia,et al.  Early stages during the oxidation of HCOOH on single-crystal Pt electrodes as characterized by infrared spectroscopy , 1996 .

[20]  F. Illas,et al.  Adsorption of CO at Palladium Monolayers Deposited on Pt(111) Electrodes. Combined Spectroelectrochemical and Theoretical Study , 2001 .

[21]  R. Masel,et al.  The Effect of Ruthenium on the Binding of CO, H2, and H2O on Pt(110) , 2001 .

[22]  A. Wiȩckowski,et al.  Methanol Electrooxidation on Platinum/Ruthenium Nanoparticle Catalysts , 2001 .

[23]  R. Parsons,et al.  The oxidation of formic acid at noble metal electrodes , 1973 .

[24]  R. Parsons,et al.  The oxidation of formic acid at noble metal electrodes Part 4. Platinum + palladium alloys , 1975 .

[25]  M. Watanabe,et al.  Electrocatalysis by Sn and Ge AD-atoms , 1976 .

[26]  G. Ertl,et al.  On the origin of oscillations in the electrocatalytic oxidation of HCOOH on a Pt electrode modified by Bi deposition , 2001 .

[27]  S. Gottesfeld,et al.  Adsorption of CO poison on fuel cell nanoparticle electrodes from methanol solutions: a radioactive labeling study , 2001 .

[28]  A. Aldaz,et al.  Formic acid oxidation on Pdad + Pt(100) and Pdad + Pt(111) electrodes , 1994 .

[29]  A. Aldaz,et al.  Formic acid self-poisoning on bismuth-modified stepped electrodes , 2001 .

[30]  S. Gojković,et al.  Methanol oxidation on an ink type electrode using Pt supported on high area carbons , 2001 .

[31]  E. Oldfield,et al.  An NMR investigation of CO tolerance in a Pt/Ru fuel cell catalyst. , 2002, Journal of the American Chemical Society.

[32]  Robert F. Savinell,et al.  Formic Acid Oxidation in a Polymer Electrolyte Fuel Cell A Real‐Time Mass‐Spectrometry Study , 1996 .

[33]  A. Aldaz,et al.  Formic acid oxidation on Pt(111) electrodes modified by irreversibly adsorbed selenium , 1994 .

[34]  H. Gasteiger,et al.  Electro-oxidation of small organic molecules on well-characterized PtRu alloys , 1994 .