Impact of different nanoparticles on the thermal degradation kinetics of phenolic resin nanocomposites

[1]  P. Visakh,et al.  Polyethylene-Based Blends, Composites and Nanocomposites: Visakh/Polyethylene-Based , 2015 .

[2]  Carlos Sáenz Ezquerro,et al.  Characterization of montmorillonites modified with organic divalent phosphonium cations , 2015 .

[3]  M. Salavati‐Niasari,et al.  Preparation and characterization of nanoscale ZrB2/carbon–resol composite for protection against high-temperature corrosion , 2015, Journal of Thermal Analysis and Calorimetry.

[4]  L. Varshney,et al.  Influence of the reactive diluent on electron beam curable funtionalized N-(4-hydroxyl phenyl) maleimide derivatives – Studies on thermal degradation kinetics using model free approach , 2014 .

[5]  S. Mazinani,et al.  Modified thermo-physical properties of phenolic resin/carbon fiber composite with nano zirconium dioxide , 2014, Journal of Thermal Analysis and Calorimetry.

[6]  A. Mahendran,et al.  Model free kinetics—Thermal degradation of bisphenol A based polybismaleimide–cloisite 15a nanocomposites , 2013 .

[7]  G. Madras,et al.  Thermal degradation kinetics of poly(trimethylol propane triacrylate)/poly(hexane diol diacrylate) interpenetrating polymer network , 2012 .

[8]  Alan K. Burnham,et al.  ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data , 2011 .

[9]  Anilesh Kumar,et al.  Nano silica modified carbon–phenolic composites for enhanced ablation resistance , 2010 .

[10]  A. Vázquez,et al.  Resol/montmorillonite nanocomposites obtained by in situ polymerization , 2009 .

[11]  A. Bahramian,et al.  Ablation mechanism of polymer layered silicate nanocomposite heat shield. , 2009, Journal of hazardous materials.

[12]  J. Kenny,et al.  Influence of Clay Modification on the Properties of Resol Nanocomposites , 2008 .

[13]  J. Kenny,et al.  Structure‐properties relationship in resol/montmorillonite nanocomposites , 2007 .

[14]  K. Rhee,et al.  Effect of clay surface modification and concentration on the tensile performance of clay/epoxy nanocomposites , 2007 .

[15]  H. L. Friedman,et al.  Kinetics of thermal degradation of char-forming plastics from thermogravimetry. Application to a phenolic plastic , 2007 .

[16]  I. Daniel,et al.  Mechanical and thermal behavior of clay/epoxy nanocomposites , 2006 .

[17]  Nicolas Sbirrazzuoli,et al.  Isoconversional Kinetic Analysis of Thermally Stimulated Processes in Polymers , 2006 .

[18]  R. Frost,et al.  Modification of Wyoming montmorillonite surfaces using a cationic surfactant. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[19]  K. Moon,et al.  Glass transition and relaxation behavior of epoxy nanocomposites , 2004 .

[20]  R. Frost,et al.  Structure of organoclays--an X-ray diffraction and thermogravimetric analysis study. , 2004, Journal of colloid and interface science.

[21]  B. Guo,et al.  Effects of organo-montmorillonite dispersion on thermal stability of epoxy resin nanocomposites , 2004 .

[22]  H. Seifert,et al.  The effect of a curing agent on the thermal degradation of fire retardant brominated epoxy resins , 2004 .

[23]  J. Málek,et al.  On the evaluation of the nonisothermal kinetic parameters of (GeS2)0.3(Sb2S3)0.7 crystallization using the IKP method , 2004 .

[24]  T. Zhao,et al.  Synthesis of resol–layered silicate nanocomposites by reaction exfoliation with acid‐modified montmorillonite , 2004 .

[25]  I. Chung,et al.  Mechanical and thermal properties of phenolic resin‐layered silicate nanocomposites synthesized by melt intercalation , 2003 .

[26]  Suprakas Sinha Ray,et al.  POLYMER/LAYERED SILICATE NANOCOMPOSITES: A REVIEW FROM PREPARATION TO PROCESSING , 2003 .

[27]  J. Málek,et al.  Advantages of Combined Kinetic Analysis of Experimental Data Obtained under Any Heating Profile , 2002 .

[28]  I. Chung,et al.  Synthesis and Characterization of Resol Type Phenolic Resin/Layered Silicate Nanocomposites , 2001 .

[29]  Ying‐Ling Liu,et al.  Flame‐retardant epoxy resins: An approach from organic–inorganic hybrid nanocomposites , 2001 .

[30]  Jong Doo Lee,et al.  Morphology and Curing Behaviors of Phenolic Resin-Layered Silicate Nanocomposites Prepared by Melt Intercalation , 2000 .

[31]  R. Mülhaupt,et al.  The influence of silicate modification and compatibilizers on mechanical properties and morphology of anhydride‐cured epoxy nanocomposites , 2000 .

[32]  Alan K. Burnham,et al.  Computational aspects of kinetic analysis: Part A: The ICTAC kinetics project-data, methods and results , 2000 .

[33]  J. Wolfrum,et al.  Interdependence between the curing, structure, and the mechanical properties of phenolic resins , 1999 .

[34]  R. Vaia,et al.  Polymer/layered silicate nanocomposites as high performance ablative materials , 1999 .

[35]  A. Vázquez,et al.  Structure-properties relationship for resols with different formaldehyde/ phenol molar ratio , 1999 .

[36]  S. Vyazovkin,et al.  False isokinetic relationships found in the nonisothermal decomposition of solids , 1995 .

[37]  T. Pinnavaia,et al.  Clay-Reinforced Epoxy Nanocomposites , 1994 .

[38]  S. Levchik,et al.  A method of finding invariant values of kinetic parameters , 1983 .

[39]  J. Tate,et al.  POLYMER NANOCOMPOSITES AS ABLATIVE MATERIALS−A COMPREHENSIVE REVIEW , 2013 .

[40]  J. Kenny,et al.  Ablative properties of carbon black and MWNT/phenolic composites: A comparative study , 2012 .

[41]  T. Zhao,et al.  Synthesis of Novolac/Layered Silicate Nanocomposites by Reaction Exfoliation Using Acid‐Modified Montmorillonite , 2002 .

[42]  J. Kenny,et al.  Thermal degradation and fire resistance of epoxy-amine-phenolic blends , 2001 .

[43]  L. Pilato,et al.  Production of Phenolic Resins , 2000 .

[44]  S. Vyazovkin,et al.  Kinetics in solids. , 1997, Annual review of physical chemistry.

[45]  A. Lyons,et al.  Thermal analysis of graphite and carbon-phenolic composites by pyrolysis-mass spectrometry , 1983 .

[46]  Homer E. KlSSlNGER.  Reaction Kinetics in Differential Thermal Analysis , 1957 .