Characterization of CPV Modules and Receivers

[1]  Ignacio Antón,et al.  Losses caused by dispersion of optical parameters and misalignments in PV concentrators , 2005 .

[2]  Marco Stefancich,et al.  Characterization of CPC solar concentrators by a laser method , 2007, SPIE Optics + Photonics for Sustainable Energy.

[3]  D. Dirnberger,et al.  Uncertainty in PV Module Measurement—Part I: Calibration of Crystalline and Thin-Film Modules , 2013, IEEE Journal of Photovoltaics.

[4]  Scott A. Jones,et al.  REPRESENTATIVE TERRESTRIAL SOLAR BRIGHTNESS PROFILES , 2002 .

[5]  G. Martinelli,et al.  Optical efficiency of solar concentrators by a reverse optical path method. , 2008, Optics letters.

[6]  Marta Victoria,et al.  Characterization of the spatial distribution of irradiance and spectrum in concentrating photovoltaic systems and their effect on multi‐junction solar cells , 2013 .

[7]  Evaluation of Satellite Cirrus Data for Performance Models of CPV Modules , 2010 .

[8]  G. Peharz,et al.  Investigations on the temperature dependence of CPV modules equipped with triple‐junction solar cells , 2011 .

[9]  David L. King,et al.  Photovoltaic module and array performance characterization methods for all system operating conditions , 1996 .

[10]  C. Domínguez,et al.  On the sensitivity of 4 different CPV module technologies to relevant ambient and operation conditions , 2014 .

[11]  C. Domínguez,et al.  Two-dimensional angular transmission characterization of CPV modules. , 2010, Optics express.

[12]  Steve Askins,et al.  Power rating of CPV systems based on spectrally corrected DNI , 2012 .

[13]  Christian A. Gueymard,et al.  Spectral Circumsolar Radiation Contribution To CPV , 2010 .

[14]  Gabriel Sala,et al.  Characterization of optical collectors for concentration photovoltaic applications , 2003 .

[15]  Keith Emery.  Solar simulators and I-V measurement methods , 1986 .

[16]  Spectrally resolved DNI measurements: Results of a field comparison of spectroradiometers, component cells and the SOLIS satellite model , 2012 .

[17]  F. Rubio,et al.  Comparison of the different CPV rating procedures: Real measurements in ISFOC , 2009, 2009 34th IEEE Photovoltaic Specialists Conference (PVSC).

[18]  I. Antón,et al.  Solar simulator for concentrator photovoltaic systems. , 2008, Optics express.

[19]  Thermodynamically efficient solar concentrators , 2012 .

[20]  Harald Müllejans,et al.  Analysis and mitigation of measurement uncertainties in the traceability chain for the calibration of photovoltaic devices , 2009 .

[21]  Matthew Muller,et al.  Evaluating the IEC 61215 Ed.3 NMOT procedure against the existing NOCT procedure with PV modules in a side-by-side configuration , 2012, 2012 38th IEEE Photovoltaic Specialists Conference.

[22]  A. Bett,et al.  Influence of temperature and irradiance on triple-junction solar subcells , 2013 .

[23]  I. Antón,et al.  Multijunction solar cell model for translating I–V characteristics as a function of irradiance, spectrum, and cell temperature , 2010 .

[24]  R. Jones.  On Reversibility and Irreversibility in Optics , 1953 .

[25]  R Herrero,et al.  Luminescence inverse method For CPV optical characterization. , 2013, Optics express.

[26]  K. Emery,et al.  Measurement and Characterization of Solar Cells and Modules , 2011 .

[27]  S. Kurtz,et al.  Determining Outdoor CPV Cell Temperature , 2011 .

[28]  A. Kribus,et al.  Optical assessment of nonimaging concentrators. , 2000, Applied optics.

[29]  Marco Stefancich,et al.  Inverse illumination method for characterization of CPC concentrators , 2007, SPIE Optics + Photonics for Sustainable Energy.

[30]  M. Steiner,et al.  Estimation of the influence of Fresnel lens temperature on energy generation of a concentrator photovoltaic system , 2012 .

[31]  Correction of the temperature effect on the solar cell Isc − Voc characteristic , 1982 .

[32]  William E. McMahon,et al.  Fill factor as a probe of current‐matching for GaInP2/GaAs tandem cells in a concentrator system during outdoor operation , 2008 .

[33]  E. J. Gough,et al.  PVUSA procurement, acceptance, and rating practices for photovoltaic power plants , 1995 .

[34]  K. Edmondson,et al.  Spectral response and energy output of concentrator multijunction solar cells , 2009 .

[35]  Kenji Araki,et al.  Temperature distribution in 820X CPV module during outdoor operation , 2012 .

[36]  M. Schubnell,et al.  Sunshape and its influence on the flux distribution in imaging solar concentrators , 1992 .

[37]  Matthew Muller,et al.  Considerations for how to rate CPV , 2011 .

[38]  S. Kurtz,et al.  An Investigation into Spectral Parameters as they Impact CPV Module Performance , 2010 .

[39]  Andreas Gombert,et al.  Temperature Dependent Measurement And Simulation Of Fresnel Lenses For Concentrating Photovoltaics , 2010 .

[40]  Matthew Muller,et al.  Minimizing Variation In Outdoor CPV Power Ratings , 2011 .

[41]  S. Askins,et al.  Current‐matching estimation for multijunction cells within a CPV module by means of component cells , 2013 .

[42]  Matthew Muller,et al.  Procedural considerations for CPV outdoor power ratings per IEC 62670 , 2013 .

[43]  Maria Brogren,et al.  Optical Efficiency of Low-Concentrating Solar Energy Systems with Parabolic Reflectors , 2004 .

[44]  S. Askins,et al.  Effects of Temperature on Hybrid Lens Performance , 2011 .

[45]  K. Araki,et al.  Influences of spectrum change to 3-junction concentrator cells , 2003 .

[46]  G. Peharz,et al.  A simple method for quantifying spectral impacts on multi-junction solar cells , 2009 .

[47]  Ignacio Antón,et al.  Indoor Performance Rating Of CPV Modules at Multiple Temperatures and Irradiance Levels , 2010 .

[48]  Performance and parameter analysis of tandem solar cells using measurements at multiple spectral conditions , 1998 .

[49]  K. Araki,et al.  Atmospheric Considerations when Estimating the Energy Yield from III-V Photovoltaic Solar Concentrator Systems , 2010 .

[50]  K. Emery,et al.  Proposed reference irradiance spectra for solar energy systems testing , 2002 .

[51]  Pablo Trujillo,et al.  Influence of ambient conditions in the power rating of CPV modules , 2012 .

[52]  V. Rumyantsev,et al.  Thermal Regimes of Fresnel Lenses and Cells in “All‐Glass” HCPV Modules , 2010 .