Experimental investigation on the CaO/CaCO3 thermochemical energy storage with SiO2 doping

Abstract Thermochemical systems offer high energy densities and the possibility of long-term storage for the promotion of renewable energy utilization. In particular, CaO/CaCO3 is a very promising system in the field of thermochemical energy storage due to its high energy density, widespread availability and low cost. However, this system makes stringent demands on the performance of CaO/CaCO3 energy storage, including the high reactivity and robust cycling stability. In this study, thermodynamics, kinetics and cycling stability of SiO2-doped CaCO3 are investigated by thermogravimetric analysis and differential scanning calorimetry. The obtained results show that SiO2 has a slightly negative effect on heat storage capacity, but the amount of released heat is increased, and the specific heat capacity is improved by 20% due to the high thermal conductivity of SiO2. Additionally, samples with an optimal mass ratio of 5% SiO2 show a decrease in the activation energy by approximately 40 kJ/mol because an increase in SiO2 surface coverage (>10 wt.%) leads to a reduction in the calcination conversion. Moreover, the cycling stability of SiO2-doped CaCO3 is enhanced by 28% with an attenuation ratio of 0.85% per cycle, especially at 700 °C, which is ascribed to the faster CO2 diffusion at higher carbonation temperature.

[1]  Myung Gyu Lee,et al.  Mineral carbonation of flue gas desulfurization gypsum for CO2 sequestration , 2012 .

[2]  R. Barker,et al.  The reversibility of the reaction CaCO3 ⇄ CaO+CO2 , 2007 .

[3]  G. Fang,et al.  An overview of thermal energy storage systems , 2018 .

[4]  Dr.-Ing.B. Rumpf Thermochemical Data of Pure Substances , 1997 .

[5]  X. Py,et al.  The size of sorbents in low pressure sorption or thermochemical energy storage processes , 2014 .

[6]  Yan Wang,et al.  A new nano CaO-based CO2 adsorbent prepared using an adsorption phase technique , 2013 .

[7]  Hidehiko Kobayashi,et al.  The effect of addition of a large amount of CeO2 on the CO2 adsorption properties of CaO powder , 2017 .

[8]  Changying Zhao,et al.  Dehydration/hydration of MgO/H2O chemical thermal storage system , 2015 .

[9]  A. Majumdar,et al.  Opportunities and challenges for a sustainable energy future , 2012, Nature.

[10]  Jose Manuel Valverde,et al.  On the relevant role of solids residence time on their CO2 capture performance in the Calcium Looping technology , 2016 .

[11]  M. Shui,et al.  The decomposition kinetics of the SiO2 coated nano-scale calcium carbonate , 2002 .

[12]  Wojciech Lipiński,et al.  Thermodynamic analysis of solar thermochemical CO2 capture via carbonation/calcination cycle with heat recovery , 2012 .

[13]  Jie Feng,et al.  Enhanced CO2 sorption performance of CaO/Ca3Al2O6 sorbents and its sintering-resistance mechanism , 2017 .

[14]  Yufeng Duan,et al.  Reactivity enhancement of calcium based sorbents by doped with metal oxides through the sol–gel process , 2016 .

[15]  Jose Manuel Valverde,et al.  Large-scale high-temperature solar energy storage using natural minerals , 2017 .

[16]  Sufang Wu,et al.  Calcination–carbonation durability of nano CaCO3 doped with Li2SO4 , 2016 .

[17]  Vasilije Manovic,et al.  Calcium looping sorbents for CO2 capture , 2016 .

[18]  Günter Scheffknecht,et al.  Investigations at a 10 kWth calcium looping dual fluidized bed facility: Limestone calcination and CO2 capture under high CO2 and water vapor atmosphere , 2015 .

[19]  Yuri I. Aristov,et al.  Modification of magnesium and calcium hydroxides with salts: An efficient way to advanced materials for storage of middle-temperature heat , 2015 .

[20]  A. Deydier,et al.  A review on high temperature thermochemical heat energy storage , 2014 .

[21]  Abdul-Ghani Olabi Renewable energy and energy storage systems , 2017 .