Gas Generation from K East Basin Sludges and Irradiated Metallic Uranium Fuel Particles Series III Testing

The path forward for managing of Hanford K Basin sludge calls for it to be packaged, shipped, and stored at T Plant until final processing at a future date. An important consideration for the design and cost of retrieval, transportation, and storage systems is the potential for heat and gas generation through oxidation reactions between uranium metal and water. This report, the third in a series (Series III), describes work performed at the Pacific Northwest National Laboratory (PNNL) to assess corrosion and gas generation from irradiated metallic uranium particles (fuel particles) with and without K Basin sludge addition. The testing described in this report consisted of 12 tests. In 10 of the tests, 4.3 to 26.4 g of fuel particles of selected size distribution were placed into 60- or 800-ml reaction vessels with 0 to 100 g settled sludge. In another test, a single 3.72-g fuel fragment (i.e., 7150-mm particle) was placed in a 60 ml reaction vessel with no added sludge. The twelfth test contained only sludge. The fuel particles were prepared by crushing archived coupons (samples) from an irradiated metallic uranium fuel element. After loading the sludge materials (whether fuel particles, mixtures of fuel particles and sludge, or more » sludge-only) into reaction vessels, the solids were covered with an excess of K Basin water, the vessels closed and connected to a gas measurement manifold, and the vessels back-flushed with inert neon cover gas. The vessels were then heated to a constant temperature. The gas pressures and temperatures were monitored continuously from the times the vessels were purged. Gas samples were collected at various times during the tests, and the samples analyzed by mass spectrometry. Data on the reaction rates of uranium metal fuel particles with water as a function of temperature and particle size were generated. The data were compared with published studies on metallic uranium corrosion kinetics. The effects of an intimate overlying sludge layer (''blanket'') on the uranium metal corrosion rates were also evaluated. « less

[1]  E. Cordfunke.  The chemistry of uranium , 1969 .

[2]  S. Sunder,et al.  XPS and XRD studies of corrosion of uranium nitride by water , 1998 .

[3]  Andrew J. Schmidt,et al.  Updated Volumetric Expansion Factors for K Basin Sludge During Storage , 2003 .

[4]  A. N. Praga,et al.  105-K Basin material design basis feed description for spent nuclear fuel project facilities , 1998 .

[5]  S. Clark,et al.  The Transformation of Uranyl Oxide Hydrates: The Effect of Dehydration on Synthetic Metaschoepite and Its Alteration to Becquerelite , 1999 .

[6]  Andrew J. Schmidt,et al.  Gas Generation from K East Basin Sludges - Series II Testing , 2000 .

[7]  Paul R. Bredt,et al.  Analysis of sludge from Hanford K East Basin canisters , 1997 .

[8]  L. Weber.  Estimating the virial coefficients of the ammonia+water mixture , 1999 .

[9]  B. J. Westinghouse Hanford Makenas.  Analysis of sludge from K East basin floor and weasel pit , 1996 .

[10]  Paul R. Bredt,et al.  Testing and Analysis of Consolidated Sludge Samples from the 105 K East Basin Floor and Canisters , 2000 .

[11]  J. Fonnesbeck.  Quantitative analysis of hydrogen gas formed by aqueous corrosion of metallic uranium. , 2000 .

[12]  B. J. Makenas.  Supplementary information on K-Basin sludges , 1999 .

[13]  Paul R. Bredt,et al.  Validation Testing of the Nitric Acid Dissolution Step Within the K Basin Sludge Pretreatment Process , 1999 .

[14]  R. Fjeld,et al.  The Effect of Silica and Phosphate on the Transformation of Schoepite to Becquerelite and Other Uranyl Phases , 1996 .

[15]  R. Vochten,et al.  Transformation of schoepite into the uranyl oxide hydrates: Becquerelite, billietite and wölsendorfite , 1990 .

[16]  L. M. Ferris,et al.  Hydrolysis of Uranium Carbides between 25 and 100°. I. Uranium Monocarbide , 1962 .

[17]  Edgar C. Buck,et al.  Ten-year results from unsaturated drip tests with UO2 at 90°C: implications for the corrosion of spent nuclear fuel , 1996 .

[18]  M. A. Reilly.  Spent Nuclear Fuel Project Technical Databook , 1998 .

[19]  T. D. Pyecha,et al.  Metallographic examination of damaged N reactor spent nuclear fuel element SFEC5,4378 , 1997 .

[20]  F. Haber,et al.  Über die technische Darstellung von Ammoniak aus den Elementen , 1913 .

[21]  R. Ballinger,et al.  Kinetic and thermodynamic bases to resolve issues regarding conditioning of uranium metal fuels , 1994 .

[22]  V. H. Troutner.  MECHANISMS AND KINETICS OF URANIUM CORROSION AND URANIUM CORE FUEL ELEMENT RUPTURES IN WATER AND STEAM , 1960 .

[23]  H. Tagawa.  Formation of Uranium Nitride by the Reaction of Uranium Hydride with Nitrogen and Ammonia , 1973 .

[24]  Jj Wagner,et al.  TCLP Preparation and Analysis of K East Basin Composite Sludge Samples , 2000 .