A novel double-sided flux-switching permanent magnet linear motor

This paper proposes a novel double-sided flux-switching permanent magnet (PM) linear (DS-FSPML) motor which is suitable for low speed and high thrust force applications. In order to balance the normal force, the motor adopts double-sided arrangement in which the mover is sandwiched between two stators. The mover teeth alternately located on both sides of the mover are composed of laminated iron core segments between which the axially magnetized PMs of alternate polarity are inserted. Similar to conventional flux-switching PM (FSPM) motor, the 3-phase concentrated windings are employed. And the stator is designed as a double-sided simple iron core with salient teeth so that it is very robust to transmit high thrust force. By using the finite element method, the characteristics and performances of the proposed motor are analyzed and compared with the conventional single-sided FSPM linear motor.

[1]  Hongyun Jia,et al.  Stator-Flux-Oriented Fault-Tolerant Control of Flux-Switching Permanent-Magnet Motors , 2011, IEEE Transactions on Magnetics.

[2]  D. C. J. Krop,et al.  Analysis of a novel double sided flux switching linear motor topology , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[3]  Wei Hua,et al.  Overview of Stator-Permanent Magnet Brushless Machines , 2011, IEEE Transactions on Industrial Electronics.

[4]  Xiaoyong Zhu,et al.  Permanent magnet online magnetization performance analysis of a flux mnemonic double salient motor using an improved hysteresis model , 2012 .

[5]  Hongyun Jia,et al.  Back-EMF Harmonic Analysis and Fault-Tolerant Control of Flux-Switching Permanent-Magnet Machine With Redundancy , 2011, IEEE Transactions on Industrial Electronics.

[6]  Jian-Xin Shen,et al.  A New Method for Reduction of Detent Force in Permanent Magnet Flux-Switching Linear Motors , 2009, IEEE Transactions on Magnetics.

[7]  Kais Atallah,et al.  A tubular flux-switching permanent magnet machine , 2008 .

[8]  Wei Hua,et al.  Influence of Leading Design Parameters on the Force Performance of a Complementary and Modular Linear Flux-Switching Permanent-Magnet Motor , 2014, IEEE Transactions on Industrial Electronics.

[9]  W. Hua,et al.  Comparison of Complementary and Modular Linear Flux-Switching Motors With Different Mover and Stator Pole Pitch , 2013, IEEE Transactions on Magnetics.

[10]  L. Parsa,et al.  Thrust Optimization of a Flux-Switching Linear Synchronous Machine With Yokeless Translator , 2013, IEEE Transactions on Magnetics.

[11]  J. T. Chen,et al.  Optimization and Comparison of Novel E-Core and C-Core Linear Switched Flux PM Machines , 2011, IEEE Transactions on Magnetics.