暂无分享,去创建一个
[1] Alain Liégeois,et al. A study of multiple manipulator inverse kinematic solutions with applications to trajectory planning and workspace determination , 1986, Proceedings. 1986 IEEE International Conference on Robotics and Automation.
[2] Clément Gosselin,et al. Singularity analysis of closed-loop kinematic chains , 1990, IEEE Trans. Robotics Autom..
[3] C. Gosselin,et al. Solutions polynomiales au probleme de la cinematique directe des manipulateurs paralleles plans a trois degres de liberte , 1992 .
[4] K. H. Hunt,et al. Assembly configurations of some in-parallel-actuated manipulators , 1993 .
[5] Jean-Pierre Merlet. Trajectory Verification in the Workspace for Parallel Manipulators , 1994, Int. J. Robotics Res..
[6] P. Zsombor-Murray,et al. Singularity analysis of planar parallel manipulators , 1995 .
[7] Luc Tancredi. De la simplification et la résolution du modèle géométrique direct des robots parallèles. (Simplifying and Solving the Forward Kinematics of Parallel Manipulators) , 1995 .
[8] C. Gosselin,et al. On the quadratic nature of the singularity curves of planar three-degree-of-freedom parallel manipulators , 1995 .
[9] W. Khalil,et al. Kinematic analysis and singular configurations of a class of parallel robots , 1996 .
[10] Damien Chablat,et al. Definition sets for the direct kinematics of parallel manipulators , 1997, 1997 8th International Conference on Advanced Robotics. Proceedings. ICAR'97.
[11] S. Bhattacharya,et al. Comparison of an exact and an approximate method of singularity avoidance in platform type parallel manipulators , 1998 .
[12] J.-P. Merlet,et al. Determination of the Presence of Singularities in 6D Workspace of a Gough Parallel Manipulator , 1998 .
[13] C. Innocenti,et al. Singularity-Free Evolution From One Configuration to Another in Serial and Fully-Parallel Manipulators , 1998 .
[14] R. W. Daniel,et al. An Explanation of Never-Special Assembly Changing Motions for 3–3 Parallel Manipulators , 1999, Int. J. Robotics Res..
[15] C. Gosselin,et al. Singularity Analysis of 3-DOF Planar Parallel Mechanisms via Screw Theory , 2003 .
[16] Anjan Kumar Dash,et al. Singularity-free path planning of parallel manipulators using clustering algorithm and line geometry , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).
[17] Damien Chablat,et al. Architecture optimization of a 3-DOF translational parallel mechanism for machining applications, the orthoglide , 2003, IEEE Trans. Robotics Autom..
[18] A. Mallik,et al. Variational approach for singularity-free path-planning of parallel manipulators , 2003 .
[19] Philippe Wenger,et al. Uniqueness domains and regions of feasible paths for cuspidal manipulators , 2004, IEEE Transactions on Robotics.
[20] Roger Boudreau,et al. The Synthesis of Three-Degree-of-Freedom Planar Parallel Mechanisms with Revolute Joints (3-RRR) for an Optimal Singularity-Free Workspace , 2004, J. Field Robotics.
[21] C. Gosselin,et al. Determination of maximal singularity-free zones in the workspace of planar three-degree-of-freedom parallel mechanisms , 2006 .
[22] Damien Chablat,et al. Singular curves and cusp points in the joint space of 3-RPR parallel manipulators , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..
[23] Damien Chablat,et al. Degeneracy study of the forward kinematics of planar 3-RPR parallel manipulators , 2007, ArXiv.
[24] Damien Chablat,et al. An Algorithm for Computing Cusp Points in the Joint Space of 3-RPR Parallel Manipulators , 2006, ArXiv.
[25] Damien Chablat,et al. The Kinematic Analysis of a Symmetrical Three-Degree-of-Freedom Planar Parallel Manipulator , 2007, ArXiv.
[26] Damien Chablat,et al. Workspace and Assembly modes in Fully-Parallel Manipulators : A Descriptive Study , 2007, ArXiv.
[27] Clément Gosselin,et al. Determination of the maximal singularity-free zones in the six-dimensional workspace of the general Gough-Stewart platform , 2007 .