Additive Manufacturing of Nickel-based superalloys: a state-of-the-art review on process-structure-defect-property relationship

[1]  A. To,et al.  Multiphysics modeling of particle spattering and induced defect formation mechanism in Inconel 718 laser powder bed fusion , 2022, The International Journal of Advanced Manufacturing Technology.

[2]  N. Haghdadi,et al.  Electron and laser-based additive manufacturing of Ni-based superalloys: a review of heterogeneities in microstructure and mechanical properties , 2022, Materials & Design.

[3]  N. Haghdadi,et al.  Powder bed fusion additive manufacturing of Ni-based superalloys: a review of the main microstructural constituents and characterization techniques , 2022, Journal of Materials Science.

[4]  N. Shamsaei,et al.  Revealing deformation mechanisms in additively manufactured alloy 718: Cryogenic to elevated temperatures , 2022, Materials Science and Engineering: A.

[5]  A. Rollett,et al.  Defects and anomalies in powder bed fusion metal additive manufacturing , 2022, Current Opinion in Solid State and Materials Science.

[6]  A. Malik,et al.  Effects of microstructure and inherent stress on residual stress induced during powder bed fusion with roller burnishing , 2022, International Journal of Mechanical Sciences.

[7]  A. Chiba,et al.  A method to manipulate non-steady-state columnar-to-equiaxed transition in powder bed fusion additive manufacturing using an electron beam , 2022, Acta Materialia.

[8]  J. Liu,et al.  Influence of powder characteristics on microstructure and mechanical properties of Inconel 718 superalloy manufactured by direct energy deposition , 2022, Applied Surface Science.

[9]  F. Marone,et al.  Direct observation of crack formation mechanisms with operando Laser Powder Bed Fusion X-ray imaging , 2022, Additive Manufacturing.

[10]  N. Shamsaei,et al.  Additively manufactured Haynes 282: effect of unimodal vs. bimodal γʹ- microstructure on mechanical properties , 2022, Materials Science and Engineering: A.

[11]  M. Brochu,et al.  Microstructure and Mechanical Properties of Crack-Free Inconel 738 Fabricated by Laser Powder Bed Fusion , 2022, SSRN Electronic Journal.

[12]  M. Pham,et al.  On the detailed morphological and chemical evolution of phases during laser powder bed fusion and common post-processing heat treatments of IN718 , 2021, Additive Manufacturing.

[13]  I. Serrano-Muñoz,et al.  Diffraction-Based Residual Stress Characterization in Laser Additive Manufacturing of Metals , 2021, Metals.

[14]  C. Kenel,et al.  Evolution of Y2O3 dispersoids during laser powder bed fusion of oxide dispersion strengthened Ni-Cr-Al-Ti γ/γ’ superalloy , 2021 .

[15]  Hyoung-Seop Kim,et al.  An Effective Strengthening Strategy of Nano Carbide Precipitation and Cellular Microstructure Refinement in a Superalloy Fabricated by Selective Laser Melting Process , 2021, Metals.

[16]  A. Weidner,et al.  Very High Cycle Fatigue Investigations on the Fatigue Strength of Additive Manufactured and Conventionally Wrought Inconel 718 at 873 K , 2021, Metals.

[17]  Kenny W. Q. Low,et al.  Effects of micrometer-sized TiB2 on crack mitigation, mechanical and electrochemical performance of a Ni-based alloy fabricated by selective laser melting , 2021 .

[18]  Yuanbo T. Tang,et al.  Additive manufacturability of superalloys: Process-induced porosity, cooling rate and metal vapour , 2021, Additive Manufacturing.

[19]  T. DebRoy,et al.  Physics-informed machine learning and mechanistic modeling of additive manufacturing to reduce defects , 2021 .

[20]  I. Serrano-Muñoz,et al.  The Importance of Subsurface Residual Stress in Laser Powder Bed Fusion IN718 , 2021 .

[21]  Bi Zhang,et al.  Effect of Heat Treatment on Microstructure and Residual Stress of GH3536 Superalloy Fabricated by Selective Laser Melting , 2021, Journal of Materials Engineering and Performance.

[22]  B. Lu,et al.  Effect of Laser Energy Density on the Microstructure and Texture Evolution of Hastelloy-X Alloy Fabricated by Laser Powder Bed Fusion , 2021, Materials.

[23]  N. Shamsaei,et al.  Superior tensile properties of Hastelloy X enabled by additive manufacturing , 2021 .

[24]  Zuming Liu,et al.  Microstructure, cracking behavior and mechanical properties of René 104 superalloy fabricated by selective laser melting , 2021 .

[25]  E. Uhlmann,et al.  Internal Stress Evolution and Subsurface Phase Transformation in Titanium Parts Manufactured by Laser Powder Bed Fusion—An In Situ X‐Ray Diffraction Study , 2021, Advanced Engineering Materials.

[26]  R. Setchi,et al.  Laser powder bed fusion of advanced submicrometer TiB2 reinforced high-performance Ni-based composite , 2021, Materials Science and Engineering: A.

[27]  A. Clare,et al.  The creep behaviour of nickel alloy 718 manufactured by laser powder bed fusion , 2021, Materials & Design.

[28]  R. Setchi,et al.  Material-structure-performance integrated laser-metal additive manufacturing , 2021, Science.

[29]  A. Clare,et al.  Powder Bed Fusion of nickel-based superalloys: A review , 2021 .

[30]  D. Clark,et al.  The effects of energy density and heat treatment on the microstructure and mechanical properties of laser additive manufactured Haynes 282 , 2021, Materials & Design.

[31]  J. Alvarado-Orozco,et al.  Study of volumetric energy density limitations on the IN718 mesostructure and microstructure in laser powder bed fusion process , 2021 .

[32]  Yingtao Tian,et al.  Process parameter optimization for selective laser melting of Inconel 718 superalloy and the effects of subsequent heat treatment on the microstructural evolution and mechanical properties , 2021 .

[33]  I. Serrano-Muñoz,et al.  Scanning Manufacturing Parameters Determining the Residual Stress State in LPBF IN718 Small Parts , 2021, Advanced Engineering Materials.

[34]  A. Aversa,et al.  In-situ alloying in laser-based additive manufacturing processes: A critical review , 2021 .

[35]  Guo Dong Zhang,et al.  Effect of the scanning strategy on microstructure and mechanical anisotropy of Hastelloy X superalloy produced by Laser Powder Bed Fusion , 2021 .

[36]  Ė. Martin,et al.  Binder jetting of “Hard-to-Weld” high gamma prime nickel-based superalloy RENÉ 108 , 2021 .

[37]  E. Hryha,et al.  Microstructure and mechanical properties of Haynes 282 superalloy produced by laser powder bed fusion , 2021, Materials Today Communications.

[38]  Jutima Simsiriwong,et al.  An investigation into the effects of cyclic strain rate on the high cycle and very high cycle fatigue behaviors of wrought and additively manufactured Inconel 718 , 2021 .

[39]  M. Sprengel,et al.  On the determination of residual stresses in additively manufactured lattice structures , 2021, Journal of applied crystallography.

[40]  Xuelin Zhang,et al.  Very-High-Cycle Fatigue Behavior of Inconel 718 Alloy Fabricated by Selective Laser Melting at Elevated Temperature , 2021, Materials.

[41]  I. Serrano-Muñoz,et al.  Critical role of scan strategies on the development of microstructure, texture, and residual stresses during laser powder bed fusion additive manufacturing , 2021 .

[42]  Xin Lin,et al.  Microstructure and fatigue crack growth behavior of Inconel 718 superalloy manufactured by laser directed energy deposition , 2021, International Journal of Fatigue.

[43]  D. Kong,et al.  Microstructure and mechanical properties of nickel-based superalloy fabricated by laser powder-bed fusion using recycled powders , 2021, International Journal of Minerals, Metallurgy and Materials.

[44]  R. Fabbro,et al.  Influence of gas atmosphere (Ar or He) on the laser powder bed fusion of a Ni-based alloy , 2021, Journal of Materials Processing Technology.

[45]  Gerald L. Knapp,et al.  Mechanistic models for additive manufacturing of metallic components , 2021 .

[46]  R. Poprawe,et al.  The effect of homogenization temperature on the microstructure and high temperature mechanical performance of SLM-fabricated IN718 alloy , 2021 .

[47]  M. Pankow,et al.  The Influence of Powder Reuse on the Properties of Nickel Super Alloy ATI 718™ in Laser Powder Bed Fusion Additive Manufacturing , 2021, Metallurgical and Materials Transactions B.

[48]  I. Ho,et al.  Insight to agglomeration and chemical reactions of CoAl2O4 inoculants in IN718 processed by selective laser melting , 2021 .

[49]  Hyung Guin Kim,et al.  Effect on microstructural and mechanical properties of Inconel 718 superalloy fabricated by selective laser melting with rescanning by low energy density , 2021 .

[50]  D. G. McCartney,et al.  Alloys-by-design: Application to new superalloys for additive manufacturing , 2021 .

[51]  W. Matizamhuka,et al.  Laser Powder Bed Fusion of Potential Superalloys: A Review , 2020, Metals.

[52]  Michael A. Klecka,et al.  A Discrete Dendrite Dynamics Model for Epitaxial Columnar Grain Growth in Metal Additive Manufacturing with Application to Inconel , 2020 .

[53]  Kenny W. Q. Low,et al.  Selective laser melting of Hastelloy X nanocomposite: Effects of TiC reinforcement on crack elimination and strength improvement , 2020, Composites Part B: Engineering.

[54]  A. Chiba,et al.  Role of operating and environmental conditions in determining molten pool dynamics during electron beam melting and selective laser melting , 2020 .

[55]  Sören Sjöström,et al.  Mapping of residual stresses in as-built Inconel 718 fabricated by laser powder bed fusion: A neutron diffraction study of build orientation influence on residual stresses , 2020, Additive Manufacturing.

[56]  S. Griffiths,et al.  Combining alloy and process modification for micro-crack mitigation in an additively manufactured Ni-base superalloy , 2020 .

[57]  I. Serrano-Muñoz,et al.  On the influence of heat treatment on microstructure and mechanical behavior of laser powder bed fused Inconel 718 , 2020 .

[58]  Xin Lin,et al.  Influence of post-heat-treatment on the microstructure and fracture toughness properties of Inconel 718 fabricated with laser directed energy deposition additive manufacturing , 2020 .

[59]  A. To,et al.  Elucidating the effect of preheating temperature on melt pool morphology variation in Inconel 718 laser powder bed fusion via simulation and experiment , 2020 .

[60]  D. Gu,et al.  Understanding tensile and creep properties of WC reinforced nickel-based composites fabricated by selective laser melting , 2020 .

[61]  S. Babu,et al.  In-Situ Monitoring for Defect Identification in Nickel Alloy Complex Geometries Fabricated by L-PBF Additive Manufacturing , 2020, Metallurgical and Materials Transactions A.

[62]  R. Dehoff,et al.  A defect-resistant Co–Ni superalloy for 3D printing , 2020, Nature Communications.

[63]  S. Biamino,et al.  Electron Backscattered Diffraction to Estimate Residual Stress Levels of a Superalloy Produced by Laser Powder Bed Fusion and Subsequent Heat Treatments , 2020, Materials.

[64]  H. Wan,et al.  Small punch creep performance of heterogeneous microstructure dominated Inconel 718 fabricated by selective laser melting , 2020 .

[65]  R. Setchi,et al.  Effects of TiC content on microstructure and mechanical properties of nickel-based hastelloy X nanocomposites manufactured by selective laser melting , 2020, Materials Science and Engineering: A.

[66]  M. E. Kassner,et al.  High-temperature tensile and high cycle fatigue properties of inconel 625 alloy manufactured by laser powder bed fusion , 2020 .

[67]  I. Ho,et al.  Effects of CoAl2O4 inoculants on microstructure and mechanical properties of IN718 processed by selective laser melting , 2020 .

[68]  M. Bandini,et al.  Surface post-treatments for metal additive manufacturing: Progress, challenges, and opportunities , 2020 .

[69]  C. L. Leung,et al.  Correlative Synchrotron X-Ray Imaging and Diffraction of Directed Energy Deposition Additive Manufacturing , 2020, Acta Materialia.

[70]  I. Serrano-Muñoz,et al.  The residual stress in as-built Laser Powder Bed Fusion IN718 alloy as a consequence of the scanning strategy induced microstructure , 2020, Scientific Reports.

[71]  Zhe Sun,et al.  Investigation of Microstructure and Mechanical Performance of IN738LC Superalloy Thin Wall Produced by Pulsed Plasma Arc Additive Manufacturing , 2020, Materials.

[72]  R. O’Hara,et al.  Torsional behavior of additively manufactured nickel alloy 718 under monotonic loading and low cycle fatigue , 2020 .

[73]  A. Wessman,et al.  Microstructure and Mechanical Properties of Additively Manufactured Rene 65 , 2020 .

[74]  A. Fatemi,et al.  Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review , 2020 .

[75]  X. Ren,et al.  Microstructural evolution and mechanical properties of selective laser melted a nickel-based superalloy after post treatment , 2020 .

[76]  X. Ren,et al.  Microstructure evolution, mechanical properties, and strengthening mechanism of TiC reinforced Inconel 625 nanocomposites fabricated by selective laser melting , 2020, Materials Science and Engineering: A.

[77]  Peter D. Lee,et al.  Towards understanding grain nucleation under Additive Manufacturing solidification conditions , 2020, Acta Materialia.

[78]  L. Salvo,et al.  In situ 3D X-ray microtomography of laser-based powder-bed fusion (L-PBF)—A feasibility study , 2020, Additive Manufacturing.

[79]  N. Tamura,et al.  Multi-scale microstructural investigation of a laser 3D printed Ni-based superalloy , 2020, Additive Manufacturing.

[80]  A. Chiba,et al.  Significance of powder feedstock characteristics in defect suppression of additively manufactured Inconel 718 , 2020 .

[81]  H. Wan,et al.  Effects of surface roughness and build thickness on fatigue properties of selective laser melted Inconel 718 at 650 °C , 2020 .

[82]  F. Berto,et al.  The effect of defects and notches in quasi-static and fatigue loading of Inconel 718 specimens produced by selective laser melting , 2020 .

[83]  J. Andersson,et al.  Review of Laser Powder Bed Fusion of Gamma-Prime-Strengthened Nickel-Based Superalloys , 2020, Metals.

[84]  C. Körner,et al.  Small scale testing of IN718 single crystals manufactured by EB-PBF , 2020 .

[85]  E. Uhlmann,et al.  A laser powder bed fusion system for in situ x-ray diffraction with high-energy synchrotron radiation. , 2020, The Review of scientific instruments.

[86]  N. Shamsaei,et al.  Fatigue behavior and microstructural evolution of additively manufactured Inconel 718 under cyclic loading at elevated temperature , 2020 .

[87]  L. Tang,et al.  Influence of Co content on the microstructures and mechanical properties of a Ni–Co base superalloy made by specific additive manufacturing process , 2020 .

[88]  N. Parab,et al.  Direct observation of pore formation mechanisms during LPBF additive manufacturing process and high energy density laser welding , 2020 .

[89]  K. Wheeler,et al.  Numerical analysis of non-spherical particle effect on molten pool dynamics in laser-powder bed fusion additive manufacturing , 2020, Computational Materials Science.

[90]  A. Ramakrishnan,et al.  Design and development of a high-performance Ni-based superalloy WSU 150 for additive manufacturing , 2020, Journal of Materials Science & Technology.

[91]  R. Thewes,et al.  Heterodyne Eddy Current Testing Using Magnetoresistive Sensors for Additive Manufacturing Purposes , 2020, IEEE Sensors Journal.

[92]  Yunhao Zhao,et al.  A comparative analysis of Inconel 718 made by additive manufacturing and suction casting: Microstructure evolution in homogenization , 2020, Additive Manufacturing.

[93]  Yuanbo T. Tang,et al.  Metal 3D printing as a disruptive technology for superalloys , 2020, Nature Communications.

[94]  M. Easton,et al.  Selective laser melting of Inconel 625 alloy with reduced defect formation , 2020 .

[95]  Aiden A. Martin,et al.  Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing , 2020, Science.

[96]  J. Michopoulos,et al.  Further Studies into Crack Growth in Additively Manufactured Materials , 2020, Materials.

[97]  Zuming Liu,et al.  Cracking Behavior of René 104 Nickel-Based Superalloy Prepared by Selective Laser Melting Using Different Scanning Strategies , 2020, Materials.

[98]  Steven Y. Liang,et al.  Analytical modeling of part porosity in metal additive manufacturing , 2020 .

[99]  M. Brochu,et al.  Microstructure and mechanical properties at room and elevated temperature of crack-free Hastelloy X fabricated by laser powder bed fusion , 2020 .

[100]  Tait D. McLouth,et al.  Variations in ambient and elevated temperature mechanical behavior of IN718 manufactured by selective laser melting via process parameter control , 2020 .

[101]  R. Setchi,et al.  Effect of hot cracking on the mechanical properties of Hastelloy X superalloy fabricated by laser powder bed fusion additive manufacturing , 2020, Optics & Laser Technology.

[102]  S. Nakano,et al.  Microstructure and Creep Properties of Ni-Base Superalloy IN718 Built up by Selective Laser Melting in a Vacuum Environment , 2020, Metals.

[103]  S. P. Golanov,et al.  Investigation of the IN-738 superalloy microstructure and mechanical properties for the manufacturing of gas turbine engine nozzle guide vane by selective laser melting , 2020 .

[104]  Aiden A. Martin,et al.  Pressure dependence of the laser-metal interaction under laser powder bed fusion conditions probed by in situ X-ray imaging , 2020 .

[105]  Sagar Patel,et al.  Melting Modes in Laser Powder Bed Fusion , 2020, Materialia.

[106]  E. Uhlmann,et al.  Experimental observation of stress formation during selective laser melting using in situ X-ray diffraction , 2020 .

[107]  D. Witkin,et al.  Influence of surface conditions and specimen orientation on high cycle fatigue properties of Inconel 718 prepared by laser powder bed fusion , 2020 .

[108]  P. Peyre,et al.  Reduction of the hot cracking sensitivity of CM-247LC superalloy processed by laser cladding using induction preheating , 2020, Journal of Materials Processing Technology.

[109]  K. Kakehi,et al.  Effect of yttrium addition on creep properties of a Ni-base superalloy built up by selective laser melting , 2020 .

[110]  Nicholas C. Ferreri,et al.  Experimental characterization and crystal plasticity modeling of anisotropy, tension-compression asymmetry, and texture evolution of additively manufactured Inconel 718 at room and elevated temperatures , 2020, International Journal of Plasticity.

[111]  C. Maierhofer,et al.  In-Situ Defect Detection in Laser Powder Bed Fusion by Using Thermography and Optical Tomography—Comparison to Computed Tomography , 2020 .

[112]  J. Moverare,et al.  On the Strengthening and Embrittlement Mechanisms of an Additively Manufactured Nickel-Base Superalloy , 2020, Materialia.

[113]  D. Manfredi,et al.  The role of texturing and microstructure evolution on the tensile behavior of heat-treated Inconel 625 produced via laser powder bed fusion , 2020 .

[114]  H. Asgari,et al.  Pore space characteristics and corresponding effect on tensile properties of Inconel 625 fabricated via laser powder bed fusion , 2020 .

[115]  B. Lu,et al.  Graphene reinforced nickel-based superalloy composites fabricated by additive manufacturing , 2020 .

[116]  J. Kruth,et al.  Effect of temperature on the microstructure and tensile properties of micro-crack free hastelloy X produced by selective laser melting , 2020, Additive Manufacturing.

[117]  A. Durga,et al.  Computational Design of Additively Printable Nickel Superalloys , 2020 .

[118]  Yuanbo T. Tang,et al.  Additive Manufacturability of Nickel-Based Superalloys: Composition-Process Induced Vapourization , 2020 .

[119]  S. Forsik,et al.  Development of a New Alumina-Forming Crack-Resistant High-γ′ Fraction Ni-Base Superalloy for Additive Manufacturing , 2020 .

[120]  C. Leyens,et al.  Novel Approach for Suppressing of Hot Cracking Via Magneto-fluid Dynamic Modification of the Laser-Induced Marangoni Convection , 2020 .

[121]  Sean L. Yoder,et al.  Mechanical Performance of a Non-weldable Ni-Base Superalloy: Inconel 738 Fabricated by Electron Beam Melting , 2020 .

[122]  Y. Kaynak,et al.  Post-processing effects on the surface characteristics of Inconel 718 alloy fabricated by selective laser melting additive manufacturing , 2020, Progress in Additive Manufacturing.

[123]  L. Ladani,et al.  Temperature Profile, Bead Geometry, and Elemental Evaporation in Laser Powder Bed Fusion Additive Manufacturing Process , 2020, JOM.

[124]  Fencheng Liu,et al.  Experimental Investigation on the LCF Behavior Affected by Manufacturing Defects and Creep Damage of One Selective Laser Melting Nickel-Based Superalloy at 815 °C , 2019, Acta Metallurgica Sinica (English Letters).

[125]  X. Fang,et al.  A Review on Laser Powder Bed Fusion of Inconel 625 Nickel-Based Alloy , 2019, Applied Sciences.

[126]  Xiaoqiang Zhang,et al.  Cracking mechanism and susceptibility of laser melting deposited Inconel 738 superalloy , 2019 .

[127]  K. Chou,et al.  The effects of stress relieving heat treatment on the microstructure and residual stress of Inconel 718 fabricated by laser metal powder bed fusion additive manufacturing process , 2019 .

[128]  R. Setchi,et al.  Additive manufacturing of high-strength crack-free Ni-based Hastelloy X superalloy , 2019, Additive Manufacturing.

[129]  Ho Yeung,et al.  Part geometry and conduction-based laser power control for powder bed fusion additive manufacturing. , 2019, Additive manufacturing.

[130]  Xinliang Zhang,et al.  Microstructure and grain growth direction of SRR99 single-crystal superalloy by selective laser melting , 2019, Journal of Alloys and Compounds.

[131]  G. Nicoletto.  Smooth and notch fatigue behavior of selectively laser melted Inconel 718 with as-built surfaces , 2019, International Journal of Fatigue.

[132]  Wentao Yan,et al.  Powder-spreading mechanisms in powder-bed-based additive manufacturing: Experiments and computational modeling , 2019, Acta Materialia.

[133]  F. Walther,et al.  Effect of miniaturization and surface roughness on the mechanical properties of the electron beam melted superalloy Inconel®718 , 2019, Progress in Additive Manufacturing.

[134]  Brandon M. Lane,et al.  Topographic Measurement of Individual Laser Tracks in Alloy 625 Bare Plates , 2019, Integrating Materials and Manufacturing Innovation.

[135]  P. Michaleris,et al.  Experimental validation of thermo-mechanical part-scale modeling for laser powder bed fusion processes , 2019, Additive Manufacturing.

[136]  P. Terriault,et al.  Long fatigue crack propagation behavior of laser powder bed-fused inconel 625 with intentionally-seeded porosity , 2019, International Journal of Fatigue.

[137]  Nick Tepylo,et al.  Laser‐Based Additive Manufacturing Technologies for Aerospace Applications , 2019, Advanced Engineering Materials.

[138]  A. Clare,et al.  Oxide and spatter powder formation during laser powder bed fusion of Hastelloy X , 2019, Powder Technology.

[139]  S. Kelly,et al.  Microstructure, fatigue, and impact toughness properties of additively manufactured nickel alloy 718 , 2019, Additive Manufacturing.

[140]  Tait D. McLouth,et al.  Anomalous Notch Rupture Behavior of Nickel-Based Superalloy Inconel 718 Due to Fabrication by Additive Manufacturing , 2019, Metallurgical and Materials Transactions A.

[141]  Devlin Hayduke,et al.  An inherent strain based multiscale modeling framework for simulating part-scale residual deformation for direct metal laser sintering , 2019, Additive Manufacturing.

[142]  J. Hattel,et al.  Multiphysics modelling of lack-of-fusion voids formation and evolution in IN718 made by multi-track/multi-layer L-PBF , 2019, International Journal of Heat and Mass Transfer.

[143]  Tyler Palma,et al.  Nanomechanical Characterization of Laser Peened Additively Manufactured Inconel 718 Superalloy , 2019, Advanced Engineering Materials.

[144]  J. Moverare,et al.  Short-Term Creep Behavior of an Additive Manufactured Non-Weldable Nickel-Base Superalloy Evaluated by Slow Strain Rate Testing , 2019, Acta Materialia.

[145]  Moataz M. Attallah,et al.  Cracking during thermal post-processing of laser powder bed fabricated CM247LC Ni-superalloy , 2019, Materials & Design.

[146]  B. McWilliams,et al.  Microstructure, precipitates and mechanical properties of powder bed fused inconel 718 before and after heat treatment , 2019, Journal of Materials Science & Technology.

[147]  S. Scudino,et al.  Effect of TiB2 particles on microstructure and crystallographic texture of Al-12Si fabricated by selective laser melting , 2019, Journal of Alloys and Compounds.

[148]  Guoqing Wang,et al.  Influence of substrate characteristics on residual stress of SLMed Inconel 718 , 2019, Rapid Prototyping Journal.

[149]  A. Rollett,et al.  Varied heat treatments and properties of laser powder bed printed Inconel 718 , 2019, Materials Science and Engineering: A.

[150]  Wing Kam Liu,et al.  A cellular automaton finite volume method for microstructure evolution during additive manufacturing , 2019, Materials & Design.

[151]  Lin Cheng,et al.  On utilizing topology optimization to design support structure to prevent residual stress induced build failure in laser powder bed metal additive manufacturing , 2019, Additive Manufacturing.

[152]  A. Fatemi,et al.  Fatigue behaviour of additive manufactured materials: An overview of some recent experimental studies on Ti‐6Al‐4V considering various processing and loading direction effects , 2019, Fatigue & Fracture of Engineering Materials & Structures.

[153]  U. Ramamurty,et al.  Microstructural optimization through heat treatment for enhancing the fracture toughness and fatigue crack growth resistance of selective laser melted Ti 6Al 4V alloy , 2019, Acta Materialia.

[154]  G. Baxter,et al.  The Influence of Process Parameters and Build Orientation on the Creep Behaviour of a Laser Powder Bed Fused Ni-based Superalloy for Aerospace Applications , 2019, Materials.

[155]  Matthew S. Dargusch,et al.  Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing , 2019, Acta Materialia.

[156]  Chen Hong,et al.  Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance , 2019, Composites Part B: Engineering.

[157]  Z. Jiao,et al.  Experimental evaluation on elevated temperature fatigue and tensile properties of one selective laser melted nickel based superalloy , 2019, International Journal of Fatigue.

[158]  E. Toyserkani,et al.  Surface modification of binder-jet additive manufactured Inconel 625 via electrospark deposition , 2019, Surface and Coatings Technology.

[159]  T. Tinga,et al.  Revealing the Effects of Powder Reuse for Selective Laser Melting by Powder Characterization , 2019, JOM.

[160]  Manyalibo J. Matthews,et al.  Ultrafast dynamics of laser-metal interactions in additive manufacturing alloys captured by in situ X-ray imaging , 2019, Materials Today Advances.

[161]  J. Moverare,et al.  Microstructural influence on fatigue crack propagation during high cycle fatigue testing of additively manufactured Alloy 718 , 2019, Materials Characterization.

[162]  Nicholas C. Ferreri,et al.  Role of grain structure, grain boundaries, crystallographic texture, precipitates, and porosity on fatigue behavior of Inconel 718 at room and elevated temperatures , 2019, Materials Characterization.

[163]  Yuichiro Koizumi,et al.  Effect of process parameters on melt pool geometry and microstructure development for electron beam melting of IN718: A systematic single bead analysis study , 2019, Additive Manufacturing.

[164]  Philip J. Withers,et al.  The effect of powder oxidation on defect formation in laser additive manufacturing , 2019, Acta Materialia.

[165]  Stewart Williams,et al.  Investigation of process factors affecting mechanical properties of INCONEL 718 superalloy in wire + arc additive manufacture process , 2019, Journal of Materials Processing Technology.

[166]  Per Nylén,et al.  Predicting the Microstructural Evolution of Electron Beam Melting of Alloy 718 with Phase-Field Modeling , 2019, Metallurgical and Materials Transactions A.

[167]  Xianghui Xiao,et al.  Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel , 2019, Materials & Design.

[168]  Z. Zhou,et al.  Comparative investigation of small punch creep resistance of Inconel 718 fabricated by selective laser melting , 2019, Materials Science and Engineering: A.

[169]  I. Serrano-Muñoz,et al.  3D Shape Analysis of Powder for Laser Beam Melting by Synchrotron X-ray CT , 2019, Quantum Beam Science.

[170]  Hua-ming Wang,et al.  On the solidification behaviour and cracking origin of a nickel-based superalloy during selective laser melting , 2019, Materials Characterization.

[171]  Weidong Huang,et al.  The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing , 2019, Acta Materialia.

[172]  A. Ramakrishnan,et al.  Direct laser metal deposition of Inconel 738 , 2019, Materials Science and Engineering: A.

[173]  T. DebRoy,et al.  Three-dimensional grain growth during multi-layer printing of a nickel-based alloy Inconel 718 , 2019, Additive Manufacturing.

[174]  A. Clarke,et al.  Multiscale dendritic needle network model of alloy solidification with fluid flow , 2013, Computational Materials Science.

[175]  Y. Tanaka,et al.  Effect of Surface Roughness on Fatigue Strength of Ti-6Al-4V Alloy Manufactured by Additive Manufacturing , 2019, Procedia Structural Integrity.

[176]  E. Toyserkani,et al.  On the effect of spatter particles distribution on the quality of Hastelloy X parts made by laser powder-bed fusion additive manufacturing , 2019, Journal of Manufacturing Processes.

[177]  A. N. Jinoop,et al.  Laser assisted direct energy deposition of Hastelloy-X , 2019, Optics & Laser Technology.

[178]  K. Kakehi,et al.  Study of Formed Oxides in IN718 Alloy during the Fabrication by Selective Laser Melting and Electron Beam Melting , 2018, Metals.

[179]  N. Stepanova,et al.  Superalloys , 2018 .

[180]  Yellapu V. Murty,et al.  In situ defect detection in selective laser melting via full-field infrared thermography , 2018, Additive Manufacturing.

[181]  A. Clare,et al.  Effect of post processing on the creep performance of laser powder bed fused Inconel 718 , 2018, Additive Manufacturing.

[182]  A. Mostafaei,et al.  Characterizing surface finish and fatigue behavior in binder-jet 3D-printed nickel-based superalloy 625 , 2018, Additive Manufacturing.

[183]  Christopher D. Pleass,et al.  Influence of powder characteristics and additive manufacturing process parameters on the microstructure and mechanical behaviour of Inconel 625 fabricated by Selective Laser Melting , 2018, Additive Manufacturing.

[184]  B. Chen,et al.  Microstructure, mechanical properties and cracking behaviour in a γ′-precipitation strengthened nickel-base superalloy fabricated by electron beam melting , 2018, Materials & Design.

[185]  R. Lancaster,et al.  Effects of heat treatment on microstructure and creep properties of a laser powder bed fused nickel superalloy , 2018, Materials & Design.

[186]  Y. Murakami,et al.  Defect analysis and fatigue design basis for Ni-based superalloy 718 manufactured by selective laser melting , 2018, International Journal of Fatigue.

[187]  T. Uchida,et al.  Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing , 2018, International Journal of Fatigue.

[188]  Tarasankar DebRoy,et al.  Mitigation of lack of fusion defects in powder bed fusion additive manufacturing , 2018, Journal of Manufacturing Processes.

[189]  P. Terriault,et al.  Long fatigue crack propagation behavior of Inconel 625 processed by laser powder bed fusion: Influence of build orientation and post-processing conditions , 2018, International Journal of Fatigue.

[190]  K. Chou,et al.  Microstructure simulations of Inconel 718 during selective laser melting using a phase field model , 2018, The International Journal of Advanced Manufacturing Technology.

[191]  A. Clare,et al.  Spatter and oxide formation in laser powder bed fusion of Inconel 718 , 2018, Additive Manufacturing.

[192]  Yunping Li,et al.  Electron beam additive manufacturing of Inconel 718 alloy rods: Impact of build direction on microstructure and high-temperature tensile properties , 2018, Additive Manufacturing.

[193]  G. B. Olson,et al.  Characterization of nano-scale oxides in austenitic stainless steel processed by powder bed fusion , 2018, Scripta Materialia.

[194]  Z. Zhou,et al.  Effect of heat treatment on microstructure evolution of Inconel 718 alloy fabricated by selective laser melting , 2018, Journal of Alloys and Compounds.

[195]  Wenguang Nan,et al.  Jamming during particle spreading in additive manufacturing , 2018, Powder Technology.

[196]  Laith Abdullah Al-Juboori,et al.  On the Tensile Properties of Inconel 718 Fabricated by EBM for As-Built and Heat-Treated Components , 2018, Metallurgical and Materials Transactions B.

[197]  M. Stoudt,et al.  Precipitation and dissolution of δ and γ″ during heat treatment of a laser powder-bed fusion produced Ni-based superalloy , 2018, Scripta Materialia.

[198]  R. Hague,et al.  A comparison of Ti-6Al-4V in-situ alloying in Selective Laser Melting using simply-mixed and satellited powder blend feedstocks , 2018, Materials Characterization.

[199]  Anton du Plessis,et al.  X-Ray Microcomputed Tomography in Additive Manufacturing: A Review of the Current Technology and Applications , 2018, 3D Printing and Additive Manufacturing.

[200]  Yucheng Liu,et al.  Investigation on Microsegregation of IN718 Alloy During Additive Manufacturing via Integrated Phase-Field and Finite-Element Modeling , 2018, Journal of Materials Engineering and Performance.

[201]  R. Setchi,et al.  Laser powder bed fusion of Hastelloy X: Effects of hot isostatic pressing and the hot cracking mechanism , 2018, Materials Science and Engineering: A.

[202]  Vimal Dhokia,et al.  Invited review article: Strategies and processes for high quality wire arc additive manufacturing , 2018, Additive Manufacturing.

[203]  Amit Bandyopadhyay,et al.  Additive manufacturing of Inconel 718 – Ti6Al4V bimetallic structures , 2018, Additive Manufacturing.

[204]  D. Gu,et al.  Microstructure and performance evolution and underlying thermal mechanisms of Ni-based parts fabricated by selective laser melting , 2018, Additive Manufacturing.

[205]  Brendan P. Croom,et al.  Revealing mechanisms of residual stress development in additive manufacturing via digital image correlation , 2018, Additive Manufacturing.

[206]  T. Book,et al.  Role of heat treatment and build orientation in the microstructure sensitive deformation characteristics of IN718 produced via SLM additive manufacturing , 2018, Additive Manufacturing.

[207]  Iain Todd,et al.  Thermal near infrared monitoring system for electron beam melting with emissivity tracking , 2018, Additive Manufacturing.

[208]  S. Sivaprasad,et al.  High-Temperature Low-Cycle Fatigue Behavior in HAYNES 282: Influence of Initial Microstructure , 2018, Metallurgical and Materials Transactions A.

[209]  R. Dehoff,et al.  Correlation of Microstructure to Creep Response of Hot Isostatically Pressed and Aged Electron Beam Melted Inconel 718 , 2018, Metallurgical and Materials Transactions A.

[210]  K. Kakehi,et al.  Characterization of Ni-Based Superalloy Built by Selective Laser Melting and Electron Beam Melting , 2018, Metallurgical and Materials Transactions A.

[211]  R. Dendievel,et al.  Producing Ni-base superalloys single crystal by selective electron beam melting , 2018, Scripta Materialia.

[212]  J. Newman,et al.  Fatigue life prediction of additively manufactured material: Effects of surface roughness, defect size, and shape , 2018 .

[213]  S. Nai,et al.  The role of powder layer thickness on the quality of SLM printed parts , 2018, Archives of Civil and Mechanical Engineering.

[214]  Jing Shi,et al.  Microstructure and Tensile Properties of SLM Graphene Reinforced Inconel 718 Alloy After Post Heat Treatment , 2018, Volume 2: Materials; Joint MSEC-NAMRC-Manufacturing USA.

[215]  Ryan R. Dehoff,et al.  Additive Manufacturing of Nickel Superalloys: Opportunities for Innovation and Challenges Related to Qualification , 2018, Metallurgical and Materials Transactions A.

[216]  F. Calignano,et al.  Influence of heat treatments on microstructure evolution and mechanical properties of Inconel 625 processed by laser powder bed fusion , 2018, Materials Science and Engineering: A.

[217]  Fan Zhang,et al.  Effect of heat treatment on the microstructural evolution of a nickel-based superalloy additive-manufactured by laser powder bed fusion. , 2018, Acta materialia.

[218]  Kamel Fezzaa,et al.  Transient dynamics of powder spattering in laser powder bed fusion additive manufacturing process revealed by in-situ high-speed high-energy x-ray imaging , 2018, Acta Materialia.

[219]  Charlie C. L. Wang,et al.  Current and future trends in topology optimization for additive manufacturing , 2018 .

[220]  S. Abbasi,et al.  The effect of boron and zirconium on wrought structure and γ-γ′ lattice misfit characterization in nickel-based superalloy ATI 718Plus , 2018, Materials Chemistry and Physics.

[221]  A. Clare,et al.  Creep behaviour of inconel 718 processed by laser powder bed fusion , 2018, Journal of Materials Processing Technology.

[222]  K. Kakehi,et al.  The Effect of Post-Processes on the Microstructure and Creep Properties of Alloy718 Built Up by Selective Laser Melting , 2018, Materials.

[223]  A. Kromm,et al.  The Influence of the Support Structure on Residual Stress and Distortion in SLM Inconel 718 Parts , 2018, Metallurgical and Materials Transactions A.

[224]  I. Ho,et al.  Microstructure evolution induced by inoculants during the selective laser melting of IN718 , 2018 .

[225]  Benjamin R. Lund,et al.  Effect of heat treatment variations on the mechanical properties of Inconel 718 selective laser melted specimens , 2018 .

[226]  Yulin Hao,et al.  Additive Manufacturing of Titanium Alloys by Electron Beam Melting: A Review , 2018 .

[227]  J. Cabrera,et al.  High-temperature deformation of delta-processed Inconel 718 , 2018 .

[228]  Y. Shin,et al.  Predictive modeling capabilities from incident powder and laser to mechanical properties for laser directed energy deposition , 2018 .

[229]  M. Jamshidinia,et al.  Prediction of microstructure, residual stress, and deformation in laser powder bed fusion process , 2018 .

[230]  José Pedro Sousa,et al.  Non-destructive testing application of radiography and ultrasound for wire and arc additive manufacturing , 2018 .

[231]  P. Withers,et al.  In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing , 2018, Nature Communications.

[232]  Gang Chen,et al.  A comparative study of Ti-6Al-4V powders for additive manufacturing by gas atomization, plasma rotating electrode process and plasma atomization , 2018, Powder Technology.

[233]  Arif Basuki,et al.  The development of additive manufacturing technique for nickel-base alloys: A review , 2018 .

[234]  Chee How Wong,et al.  Additive manufacturing process monitoring and control by non-destructive testing techniques: challenges and in-process monitoring , 2018 .

[235]  Yuebin Guo,et al.  On the Simulation Scalability of Predicting Residual Stress and Distortion in Selective Laser Melting , 2018 .

[236]  Bi Zhang,et al.  Eddy current detection of subsurface defects for additive/subtractive hybrid manufacturing , 2018 .

[237]  Evgueni Todorov,et al.  Demonstration of array eddy current technology for real-time monitoring of laser powder bed fusion additive manufacturing process , 2018, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[238]  Mohsen Eshraghi,et al.  Effect of Build Angle on Surface Properties of Nickel Superalloys Processed by Selective Laser Melting , 2018 .

[239]  J. S. Zuback,et al.  Additive manufacturing of metallic components – Process, structure and properties , 2018 .

[240]  J. Knott,et al.  Effects of compressive residual stress on short fatigue crack growth in a nickel-based superalloy , 2018 .

[241]  Geok Soon Hong,et al.  Defect detection in selective laser melting technology by acoustic signals with deep belief networks , 2018, The International Journal of Advanced Manufacturing Technology.

[242]  Li Ma,et al.  Single-Track Melt-Pool Measurements and Microstructures in Inconel 625 , 2018, 1802.05827.

[243]  R. Dehoff,et al.  Feedstock powder processing research needs for additive manufacturing development , 2018 .

[244]  Vladimir Brailovski,et al.  Surface finish control of additively-manufactured Inconel 625 components using combined chemical-abrasive flow polishing , 2018 .

[245]  Jun Zhang,et al.  Nucleation Crystallography of Ni Grains on CrFeNb Inoculants Investigated by Edge‐to‐Edge Matching Model in an IN718 Superalloy , 2018 .

[246]  R. Dehoff,et al.  Electron beam melting of Inconel 718: effects of processing and post-processing , 2018 .

[247]  M. Jahazi,et al.  Hot compression behavior and microstructure of selectively laser-melted IN718 alloy , 2018, The International Journal of Advanced Manufacturing Technology.

[248]  D. Lados,et al.  A Review of the Fatigue Properties of Additively Manufactured Ti-6Al-4V , 2018 .

[249]  Y. Chew,et al.  Numerical and experimental study of laser aided additive manufacturing for melt-pool profile and grain orientation analysis , 2018 .

[250]  S. Biamino,et al.  Study of the Microstructure and Cracking Mechanisms of Hastelloy X Produced by Laser Powder Bed Fusion , 2018, Materials.

[251]  Cheng Longfei,et al.  Laser Polishing of Additive Manufactured Superalloy , 2018 .

[252]  R. Dendievel,et al.  Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron Beam Melting , 2018 .

[253]  Jack Beuth,et al.  Anomaly Detection and Classification in a Laser Powder Bed Additive Manufacturing Process using a Trained Computer Vision Algorithm , 2018 .

[254]  G. L. Knappa,et al.  Experiments and simulations on solidification microstructure for Inconel 718 in powder bed fusion electron beam additive manufacturing , 2018 .

[255]  R. Akid,et al.  Estimation of crack initiation stress and local fracture toughness of Ni-alloys 945X (UNS N09946) and 718 (UNS N07718) under hydrogen environment via fracture surface topography analysis , 2017 .

[256]  Xin Lin,et al.  Electrochemical behavior of Inconel 718 fabricated by laser solid forming on different sections , 2017 .

[257]  Johan Moverare,et al.  Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: Sample orientation dependence and effects of post heat treatments , 2017 .

[258]  S. Babu,et al.  Verification and validation of a rapid heat transfer calculation methodology for transient melt pool solidification conditions in powder bed metal additive manufacturing , 2017 .

[259]  Aitzol Lamikiz,et al.  Microstructure characterization of recycled IN718 powder and resulting laser clad material , 2017 .

[260]  R. Dehoff,et al.  Effect of anisotropy and texture on the low cycle fatigue behavior of Inconel 718 processed via electron beam melting , 2017 .

[261]  I. Beyerlein,et al.  A crystal plasticity model incorporating the effects of precipitates in superalloys: Application to tensile, compressive, and cyclic deformation of Inconel 718 , 2017 .

[262]  P. Peyre,et al.  Influence of SLM process parameters on the surface finish, porosity rate and fatigue behavior of as-built Inconel 625 parts , 2017 .

[263]  C. Kenel,et al.  In situ investigation of phase transformations in Ti-6Al-4V under additive manufacturing conditions combining laser melting and high-speed micro-X-ray diffraction , 2017, Scientific Reports.

[264]  A. Kromm,et al.  Effect of hatch length on the development of microstructure, texture and residual stresses in selective laser melted superalloy Inconel 718 , 2017 .

[265]  M. L. Nai,et al.  Characteristics of Inconel Powders for Powder-Bed Additive Manufacturing , 2017 .

[266]  L. Ladani,et al.  Finite element simulation of laser additive melting and solidification of Inconel 718 with experimentally tested thermal properties , 2017 .

[267]  S. Merler,et al.  Detecting a Surprisingly Low Transmission Distance in the Early Phase of the 2009 Influenza Pandemic , 2017, Scientific Reports.

[268]  T. Pollock,et al.  3D printing of high-strength aluminium alloys , 2017, Nature.

[269]  Peter Kenesei,et al.  Investigation of fatigue crack initiation from a non-metallic inclusion via high energy x-ray diffraction microscopy , 2017 .

[270]  K. Kakehi,et al.  Influence of Powder Surface Contamination in the Ni-Based Superalloy Alloy718 Fabricated by Selective Laser Melting and Hot Isostatic Pressing , 2017 .

[271]  Mohsen Attaran,et al.  The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing , 2017 .

[272]  Du Jinhui,et al.  Effect of Solution Treatment on the Microstructure and Mechanical Properties of IN718 Alloy , 2017 .

[273]  S. Biamino,et al.  An Overview of Additive Manufacturing of Titanium Components by Directed Energy Deposition: Microstructure and Mechanical Properties , 2017 .

[274]  Mark R. Stoudt,et al.  Formation of the Ni3Nb δ-Phase in Stress-Relieved Inconel 625 Produced via Laser Powder-Bed Fusion Additive Manufacturing , 2017, Metallurgical and Materials Transactions A.

[275]  D. Tomus,et al.  Effect of minor alloying elements on crack-formation characteristics of Hastelloy-X manufactured by selective laser melting , 2017 .

[276]  Patrice Peyre,et al.  Tailoring residual stress profile of Selective Laser Melted parts by Laser Shock Peening , 2017 .

[277]  Rui-di Li,et al.  Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing , 2017 .

[278]  Xin Lin,et al.  Effect of Ti addition on cracking and microhardness of Inconel 625 during the laser solid forming processing , 2017 .

[279]  A. K. Bhaduri,et al.  Occurrence of dynamic strain aging in Alloy 617M under low cycle fatigue loading , 2017 .

[280]  M. Matthews,et al.  Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing , 2017, Scientific Reports.

[281]  A. Rollett,et al.  Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction , 2017, Scientific Reports.

[282]  M. Jahazi,et al.  Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments , 2017 .

[283]  N. Srinivasan,et al.  Studies on thermally grown oxide as an interface between plasma-sprayed coatings and a nickel-based superalloy substrate , 2017, International Journal of Minerals, Metallurgy, and Materials.

[284]  Valmik Bhavar,et al.  A review on powder bed fusion technology of metal additive manufacturing , 2017 .

[285]  Xin Lin,et al.  The influence of Laves phases on the high-cycle fatigue behavior of laser additive manufactured Inconel 718 , 2017 .

[286]  P. Midgley,et al.  On the crystallography and composition of topologically close-packed phases in ATI 718Plus® , 2017 .

[287]  Li Ma,et al.  Application of Finite Element, Phase-field, and CALPHAD-based Methods to Additive Manufacturing of Ni-based Superalloys. , 2017, Acta materialia.

[288]  J. Moverare,et al.  Microstructure and anisotropic mechanical properties of EBM manufactured Inconel 718 and effects of post heat treatments , 2017 .

[289]  Timothy W. Simpson,et al.  Comparisons of laser powder bed fusion additive manufacturing builds through experimental in situ distortion and temperature measurements , 2017 .

[290]  A. Clare,et al.  Fractal scan strategies for selective laser melting of ‘unweldable’ nickel superalloys , 2017 .

[291]  N. Shamsaei,et al.  Additive manufacturing of fatigue resistant materials: Challenges and opportunities , 2017 .

[292]  Moataz M. Attallah,et al.  Microstructure and yield strength of SLM-fabricated CM247LC Ni-Superalloy , 2017 .

[293]  F. Dunne,et al.  On cold dwell facet fatigue in titanium alloy aero-engine components , 2017 .

[294]  M. Brochu,et al.  Densification and microstructural investigation of Inconel 718 parts fabricated by selective laser melting , 2017 .

[295]  W. M. Tucho,et al.  Microstructure and hardness studies of Inconel 718 manufactured by selective laser melting before and after solution heat treatment , 2017 .

[296]  Di Wang,et al.  Mechanisms and characteristics of spatter generation in SLM processing and its effect on the properties , 2017 .

[297]  A. Plotkowski,et al.  Thermographic Microstructure Monitoring in Electron Beam Additive Manufacturing , 2017, Scientific Reports.

[298]  Jack Beuth,et al.  Prediction of lack-of-fusion porosity for powder bed fusion , 2017 .

[299]  K. Kakehi,et al.  Effects of build direction and heat treatment on creep properties of Ni-base superalloy built up by additive manufacturing , 2017 .

[300]  John W. Elmer,et al.  Three-dimensional modeling of grain structure evolution during welding of an aluminum alloy , 2017 .

[301]  N. Shamsaei,et al.  Microstructure, Fatigue Behavior, and Failure Mechanisms of Direct Laser-Deposited Inconel 718 , 2017 .

[302]  K. Kakehi,et al.  The effect of interdendritic δ phase on the mechanical properties of Alloy 718 built up by additive manufacturing , 2017 .

[303]  B. Colosimo,et al.  Process defects and in situ monitoring methods in metal powder bed fusion: a review , 2017 .

[304]  Ranadip Acharya,et al.  Prediction of microstructure in laser powder bed fusion process , 2017 .

[305]  Lianyi Chen,et al.  Nanoparticle-induced unusual melting and solidification behaviours of metals , 2017, Nature Communications.

[306]  Amitava De,et al.  Mitigation of thermal distortion during additive manufacturing , 2017 .

[307]  K. Kurzydłowski,et al.  Microstructure and strain-stress analysis of the dynamic strain aging in inconel 625 at high temperature , 2017, Metals and Materials International.

[308]  A. Chiba,et al.  Effects of post-processing on cyclic fatigue response of a titanium alloy additively manufactured by electron beam melting , 2017 .

[309]  J. Schoenung,et al.  On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting , 2017 .

[310]  A. Beese,et al.  Residual stress mapping in Inconel 625 fabricated through additive manufacturing: Method for neutron diffraction measurements to validate thermomechanical model predictions , 2017 .

[311]  Jack Beuth,et al.  Synchrotron-Based X-ray Microtomography Characterization of the Effect of Processing Variables on Porosity Formation in Laser Power-Bed Additive Manufacturing of Ti-6Al-4V , 2017 .

[312]  K. Salonitis,et al.  Simulation of metallic powder bed additive manufacturing processes with the finite element method: A critical review , 2017 .

[313]  Lin Cheng,et al.  A MODIFIED INHERENT STRAIN METHOD FOR FAST PREDICTION OF RESIDUAL DEFORMATION IN ADDITIVE MANUFACTURING OF METAL PARTS , 2017 .

[314]  C. Körner,et al.  Simulation of grain structure evolution during powder bed based additive manufacturing , 2017 .

[315]  F. Medina,et al.  Feasibility of in situ controlled heat treatment (ISHT) of Inconel 718 during electron beam melting additive manufacturing , 2017 .

[316]  Tarasankar DebRoy,et al.  An improved prediction of residual stresses and distortion in additive manufacturing , 2017 .

[317]  M. Oechsner,et al.  Interdiffusion in MCrAlY coated nickel-base superalloys , 2016 .

[318]  D. Gu,et al.  Effects of tailored gradient interface on wear properties of WC/Inconel 718 composites using selective laser melting , 2016 .

[319]  Jingli Luo,et al.  Effect of solutionizing and aging on the microstructure and mechanical properties of powder bed binder jet printed nickel-based superalloy 625 , 2016 .

[320]  M. Knezevic,et al.  Low cycle fatigue behavior of direct metal laser sintered Inconel alloy 718 , 2016 .

[321]  C. Cao,et al.  Fundamental Study on Laser Interactions With Nanoparticles-Reinforced Metals—Part II: Effect of Nanoparticles on Surface Tension, Viscosity, and Laser Melting , 2016 .

[322]  C. Körner,et al.  Impact of hot isostatic pressing on microstructures of CMSX-4 Ni-base superalloy fabricated by selective electron beam melting , 2016 .

[323]  A. Karma,et al.  Three-dimensional dendritic needle network model for alloy solidification , 2016 .

[324]  G. Nicoletto,et al.  Long fatigue crack growth in Inconel 718 produced by selective laser melting , 2016 .

[325]  R. M. Ward,et al.  Defect Formation and its Mitigation in Selective Laser Melting of High γ′ Ni‐Base Superalloys , 2016 .

[326]  Luke N. Carter,et al.  Additive manufacturing of Ni-based superalloys: The outstanding issues , 2016 .

[327]  R. Poprawe,et al.  A comparative study of Inconel 718 formed by High Deposition Rate Laser Metal Deposition with GA powder and PREP powder , 2016 .

[328]  K. Chou,et al.  Full length articleStress and deformation evaluations of scanning strategy effect in selective laser melting , 2016 .

[329]  S. Yao,et al.  Improved surface of additive manufactured products by coating , 2016 .

[330]  Bo Cheng,et al.  Stress and deformation evaluations of scanning strategy effect in selective laser melting , 2016 .

[331]  Wei Zhang,et al.  Modeling of heat transfer, fluid flow and solidification microstructure of nickel-base superalloy fabricated by laser powder bed fusion , 2016 .

[332]  Adam T. Clare,et al.  Spatially resolved acoustic spectroscopy for selective laser melting , 2016 .

[333]  D. Gu,et al.  Influence of hatch spacing on heat and mass transfer, thermodynamics and laser processability during additive manufacturing of Inconel 718 alloy , 2016 .

[334]  Nicola Senin,et al.  Surface texture metrology for metal additive manufacturing: a review , 2016 .

[335]  T. Niendorf,et al.  Superior creep strength of a nickel-based superalloy produced by selective laser melting , 2016 .

[336]  H. Stone,et al.  Effect of heat treatment on the microstructure, texture and elastic anisotropy of the nickel-based superalloy CM247LC processed by selective laser melting , 2016 .

[337]  D. Gu,et al.  Formation of novel graded interface and its function on mechanical properties of WC1−x reinforced Inconel 718 composites processed by selective laser melting , 2016 .

[338]  Vasily Ploshikhin,et al.  Evolution of grain structure during laser additive manufacturing. Simulation by a cellular automata method , 2016 .

[339]  Z. Cui,et al.  Mesoscale modeling and simulation of microstructure evolution during dynamic recrystallization of a Ni-based superalloy , 2016 .

[340]  Galina Kasperovich,et al.  Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting , 2016 .

[341]  P. Prangnell,et al.  Porosity Regrowth During Heat Treatment of Hot Isostatically Pressed Additively Manufactured Titanium Components , 2016 .

[342]  Alexander M. Rubenchik,et al.  Denudation of metal powder layers in laser powder bed fusion processes , 2016 .

[343]  T. Niendorf,et al.  Microstructural design of Ni-base alloys for high-temperature applications: impact of heat treatment on microstructure and mechanical properties after selective laser melting , 2016 .

[344]  T. Niendorf,et al.  On the microstructural and mechanical properties of post-treated additively manufactured Inconel 718 superalloy under quasi-static and cyclic loading , 2016 .

[345]  F. Deschaux-Beaume,et al.  A solidification model for the columnar to equiaxed transition in welding of a Cr-Mo ferritic stainless steel with Ti as inoculant , 2016 .

[346]  Peter C. Collins,et al.  Microstructural Control of Additively Manufactured Metallic Materials , 2016 .

[347]  Robert F. Singer,et al.  Grain structure evolution in Inconel 718 during selective electron beam melting , 2016 .

[348]  Ryan R. Dehoff,et al.  Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing ☆ , 2016 .

[349]  T. Bauer,et al.  Powder flowability characterisation methodology for powder-bed-based metal additive manufacturing , 2016 .

[350]  G. Bi,et al.  Microhardness and microstructure evolution of TiB2 reinforced Inconel 625/TiB2 composite produced by selective laser melting , 2016 .

[351]  Reinhart Poprawe,et al.  Improvement of material performance of Inconel 718 formed by high deposition-rate laser metal deposition , 2016 .

[352]  C. Körner,et al.  Additive manufacturing of metallic components by selective electron beam melting — a review , 2016 .

[353]  N. Yusa,et al.  Fabrication of imitative cracks by 3D printing for electromagnetic nondestructive testing and evaluations , 2016 .

[354]  Mohsen Seifi,et al.  Metal Additive Manufacturing: A Review of Mechanical Properties , 2016 .

[355]  F. Geiger,et al.  Tailoring the texture of IN738LC processed by selective laser melting (SLM) by specific scanning strategies , 2016 .

[356]  David B. Witkin,et al.  Empirical Approach to Understanding the Fatigue Behavior of Metals Made Using Additive Manufacturing , 2016, Metallurgical and Materials Transactions A.

[357]  Richard Leach,et al.  Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing , 2016 .

[358]  Paul A. Colegrove,et al.  The effectiveness of combining rolling deformation with Wire–Arc Additive Manufacture on β-grain refinement and texture modification in Ti–6Al–4V , 2016 .

[359]  H. Stone,et al.  Microstructure of selective laser melted CM247LC nickel-based superalloy and its evolution through heat treatment , 2016 .

[360]  K. Wegener,et al.  Microstructural characteristics of the nickel-based alloy IN738LC and the cobalt-based alloy Mar-M509 produced by selective laser melting , 2016 .

[361]  Veena Tikare,et al.  Predicting Mesoscale Microstructural Evolution in Electron Beam Welding , 2016 .

[362]  K. Wegener,et al.  Processability of different IN738LC powder batches by selective laser melting , 2016 .

[363]  Yuebin Guo,et al.  A multiscale modeling approach for fast prediction of part distortion in selective laser melting , 2016 .

[364]  Luke N. Carter,et al.  Process optimisation of selective laser melting using energy density model for nickel based superalloys , 2016 .

[365]  N. Raghavan,et al.  Microstructure Development in Electron Beam-Melted Inconel 718 and Associated Tensile Properties , 2016 .

[366]  D. Farson,et al.  Simulation of transport phenomena and melt pool shape for multiple layer additive manufacturing , 2016 .

[367]  U. Glatzel,et al.  Microstructure and mechanical properties of selective laser melted Inconel 718 compared to forging and casting , 2016 .

[368]  T. Mukherjee,et al.  Printability of alloys for additive manufacturing , 2016, Scientific Reports.

[369]  Kebing Zhang,et al.  Characterization of heat affected zone liquation cracking in laser additive manufacturing of Inconel 718 , 2016 .

[370]  L. Levine,et al.  Unexpected δ-Phase Formation in Additive-Manufactured Ni-Based Superalloy , 2016 .

[371]  Robert F. Singer,et al.  Microstructure of the Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting , 2016, Metallurgical and Materials Transactions A.

[372]  Konrad Wegener,et al.  Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles , 2016 .

[373]  Andrew T. Anderson,et al.  Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones , 2015, 1512.02593.

[374]  Evren Yasa,et al.  A Study on the Stair Stepping Effect in Direct Metal Laser Sintering of a Nickel-based Superalloy , 2016 .

[375]  K. Kurzydłowski,et al.  The Influence of the Melt-Pouring Temperature and Inoculant Content on the Macro and Microstructure of the IN713C Ni-Based Superalloy , 2016 .

[376]  Brandon M. Lane,et al.  Effect of Process Parameters on the Surface Roughness of Overhanging Structures in Laser Powder Bed Fusion Additive Manufacturing , 2016 .

[377]  D. Go,et al.  Part-scale model for fast prediction of thermal distortion in DMLS additive manufacturing ; Part 2 : a quasi-static thermomechanical model , 2016 .

[378]  Ryan R. Dehoff,et al.  Recyclability Study on Inconel 718 and Ti-6Al-4V Powders for Use in Electron Beam Melting , 2016, Metallurgical and Materials Transactions B.

[379]  C. Kamath,et al.  Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges , 2015 .

[380]  Wu Songquan,et al.  Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy , 2015 .

[381]  H L Wei,et al.  Evolution of solidification texture during additive manufacturing , 2015, Scientific Reports.

[382]  Qingyuan Wang,et al.  Ultrasonic fatigue performance of high temperature structural material Inconel 718 alloys at high temperature after UNSM treatment , 2015 .

[383]  Zemin Wang,et al.  Cracking behavior and control of Rene 104 superalloy produced by direct laser fabrication , 2015 .

[384]  Pengpeng Yuan,et al.  Particulate migration behavior and its mechanism during selective laser melting of TiC reinforced Al matrix nanocomposites , 2015 .

[385]  Somnath Ghosh,et al.  A crystal plasticity finite element model for flow stress anomalies in Ni3Al single crystals , 2015 .

[386]  Ryan B. Wicker,et al.  Analysis and correction of defects within parts fabricated using powder bed fusion technology , 2015 .

[387]  Heike Emmerich,et al.  Phase-field modeling of microstructure formation during rapid solidification in Inconel 718 superalloy , 2015 .

[388]  U. Glatzel,et al.  Mechanical and Microstructural Investigation of Nickel‐Based Superalloy IN718 Manufactured by Selective Laser Melting (SLM) , 2015 .

[389]  I. Todd,et al.  Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: A fundamental alloy design approach , 2015 .

[390]  Tomasz Kurzynowski,et al.  Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting , 2015 .

[391]  Ryan R. Dehoff,et al.  Computational modeling of residual stress formation during the electron beam melting process for Inconel 718 , 2015 .

[392]  Robert L. Bowerman,et al.  Introduction to the Additive Manufacturing Powder Metallurgy Supply Chain , 2015 .

[393]  Ma Qian,et al.  Additive manufacturing of a high niobium-containing titanium aluminide alloy by selective electron beam melting. , 2015 .

[394]  S. Antolovich.  Microstructural aspects of fatigue in Ni-base superalloys , 2015, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[395]  A. Rubenchik,et al.  Calculation of laser absorption by metal powders in additive manufacturing. , 2015, Applied optics.

[396]  David B. Witkin,et al.  Microstructural evolution and mechanical behavior of nickel-based superalloy 625 made by selective laser melting , 2015, Photonics West - Lasers and Applications in Science and Engineering.

[397]  Ma Qian,et al.  Effect of Powder Reuse Times on Additive Manufacturing of Ti-6Al-4V by Selective Electron Beam Melting , 2015 .

[398]  E. A. Payzant,et al.  Comparison of Residual Stresses in Inconel 718 Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering , 2015, Metallurgical and Materials Transactions A.

[399]  K. Kunze,et al.  Texture, anisotropy in microstructure and mechanical properties of IN738LC alloy processed by selective laser melting (SLM) , 2015 .

[400]  E. W. Reutzel,et al.  Optical, layerwise monitoring of powder bed fusion , 2015 .

[401]  Ville-Pekka Matilainen,et al.  Possibilities of CT Scanning as Analysis Method in Laser Additive Manufacturing , 2015 .

[402]  Y. S. Lee,et al.  Mesoscopic Simulation of Heat Transfer and Fluid Flow in Laser Powder Bed Additive Manufacturing , 2015 .

[403]  O. Lyckfeldt,et al.  Characterization and Control of Powder Properties for Additive Manufacturing , 2015 .

[404]  Moataz M. Attallah,et al.  The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy , 2014 .

[405]  Chandrika Kamath,et al.  Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing , 2014 .

[406]  Bo Cheng,et al.  On Process Temperature in Powder-Bed Electron Beam Additive Manufacturing: Model Development and Validation , 2014 .

[407]  Yuebin Guo,et al.  Three-Dimensional Temperature Gradient Mechanism in Selective Laser Melting of Ti-6Al-4V , 2014 .

[408]  G. Tapia,et al.  A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing , 2014 .

[409]  B. Shollock,et al.  Crystal plasticity and high-resolution electron backscatter diffraction analysis of full-field polycrystal Ni superalloy strains and rotations under thermal loading , 2014 .

[410]  S. Khairallah,et al.  Mesoscopic Simulation Model of Selective Laser Melting of Stainless Steel Powder , 2014 .

[411]  Xin Lin,et al.  Low artificial anisotropy cellular automaton model and its applications to the cell-to-dendrite transition in directional solidification , 2014, 1410.3907.

[412]  Amitava De,et al.  Heat transfer and material flow during laser assisted multi-layer additive manufacturing , 2014 .

[413]  O. Ojo,et al.  Numerical modeling of microstructure evolution during laser additive manufacturing of a nickel-based superalloy , 2014 .

[414]  Thomas Tröster,et al.  On the fatigue properties of metals manufactured by selective laser melting — The role of ductility , 2014 .

[415]  Robert F. Singer,et al.  Additive manufacturing of nickel-based superalloy Inconel 718 by selective electron beam melting: Processing window and microstructure , 2014 .

[416]  E. Chlebus,et al.  Application of X-ray CT method for discontinuity and porosity detection in 316L stainless steel parts produced with SLM technology , 2014 .

[417]  G. Bi,et al.  Microstructure and tensile properties of superalloy IN100 fabricated by micro-laser aided additive manufacturing , 2014 .

[418]  S. Suresh Babu,et al.  Rationalization of Microstructure Heterogeneity in INCONEL 718 Builds Made by the Direct Laser Additive Manufacturing Process , 2014, Metallurgical and Materials Transactions A.

[419]  I. Beyerlein,et al.  A dislocation density based crystal plasticity finite element model: Application to a two-phase polycrystalline HCP/BCC composites , 2014 .

[420]  Jae-chun Lee,et al.  Resource recycling of superalloys and hydrometallurgical challenges , 2014, Journal of Materials Science.

[421]  J.-P. Kruth,et al.  Microstructure and mechanical properties of a novel β titanium metallic composite by Selective Laser Melting , 2014 .

[422]  P. Bristowe,et al.  Thermodynamic stability and electronic structure of η-Ni6Nb(Al,Ti) from first principles , 2014 .

[423]  William E. Frazier,et al.  Metal Additive Manufacturing: A Review , 2014, Journal of Materials Engineering and Performance.

[424]  M. Ramulu,et al.  Fatigue performance evaluation of selective laser melted Ti–6Al–4V , 2014 .

[425]  Diana A. Lados,et al.  Additive Manufacturing: Making Imagination the Major Limitation , 2014 .

[426]  Moataz M. Attallah,et al.  Microstructural and texture development in direct laser fabricated IN718 , 2014 .

[427]  S. Moylan,et al.  Neutron measurements of stresses in a test artifact produced by laser-based additive manufacturing , 2014 .

[428]  Yunzhi Wang,et al.  Computer simulation of phase transformation and plastic deformation in IN718 superalloy: Microstructural evolution during precipitation , 2014 .

[429]  Carolin Körner,et al.  Modelling of electron beam absorption in complex geometries , 2014 .

[430]  S. Kohl,et al.  Influence of powder distribution on process stability in laser beam melting : Analysis of melt pool dynamics by numerical simulations , 2014 .

[431]  P. Alvarez,et al.  Effect of IN718 Recycled Powder Reuse on Properties of Parts Manufactured by Means of Selective Laser Melting , 2014 .

[432]  Robert F. Singer,et al.  Tailoring the grain structure of IN718 during selective electron beam melting , 2014 .

[433]  T. Xia,et al.  Grain refining efficiency and mechanism of pure nickel , 2015, Rare Metals.

[434]  R. Poprawe,et al.  Laser metal deposition of TiC/Inconel 718 composites with tailored interfacial microstructures , 2013 .

[435]  Joshua M. Pearce,et al.  A Low-Cost Open-Source Metal 3-D Printer , 2013, IEEE Access.

[436]  K. Wegener,et al.  High temperature material properties of IN738LC processed by selective laser melting (SLM) technology , 2013 .

[437]  L. M. Kukreja,et al.  Evaluation of fracture toughness and impact toughness of laser rapid manufactured Inconel-625 structures and their co-relation , 2013 .

[438]  P. Wanjara,et al.  Oxide films in laser additive manufactured Inconel 718 , 2013 .

[439]  Yixiong Wu,et al.  Effect of Cooling Rate on the Microstructure of Laser-Remelted INCONEL 718 Coating , 2013, Metallurgical and Materials Transactions A.

[440]  Ming Gao,et al.  The Effect of Deposition Patterns on the Deformation of Substrates During Direct Laser Fabrication , 2013 .

[441]  Ryan B. Wicker,et al.  Microstructures of Rene 142 nickel-based superalloy fabricated by electron beam melting , 2013 .

[442]  H. Maier,et al.  On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance , 2013 .

[443]  D. Tomus,et al.  Controlling the Microstructure of Hastelloy-X Components Manufactured by Selective Laser Melting , 2013 .

[444]  J. Schilp,et al.  Verification of Structural Simulation Results of Metal-based Additive Manufacturing by Means of Neutron Diffraction☆ , 2013 .

[445]  Ryan R. Dehoff,et al.  Neutron Characterization for Additive Manufacturing , 2013 .

[446]  Xibing Gong,et al.  Review on powder-based electron beam additive manufacturing technology , 2012 .

[447]  R. Poprawe,et al.  Laser additive manufacturing of metallic components: materials, processes and mechanisms , 2012 .

[448]  L. Nyborg,et al.  On-line Control of Processing Atmospheres for Proper Sintering of Oxidation-Sensitive PM Steels , 2012 .

[449]  Li Wang,et al.  Balling behavior of stainless steel and nickel powder during selective laser melting process , 2012 .

[450]  L. Murr,et al.  Comparison of Microstructures and Properties for a Ni-Base Superalloy (Alloy 625) Fabricated by Electron Beam Melting , 2012 .

[451]  L. Murr,et al.  Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting , 2012 .

[452]  L. Murr,et al.  Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies , 2012 .

[453]  Fude Wang.  Mechanical property study on rapid additive layer manufacture Hastelloy® X alloy by selective laser melting technology , 2012 .

[454]  Jean-Pierre Kruth,et al.  Determination of geometrical factors in Layerwise Laser Melting using optical process monitoring , 2011 .

[455]  Moataz M. Attallah,et al.  In-Situ observation of primary γ′ melting in Ni-base superalloy using confocal laser scanning microscopy , 2011 .

[456]  Ali Fatemi,et al.  Multiaxial fatigue: An overview and some approximation models for life estimation , 2011 .

[457]  D. StJohn,et al.  The Interdependence Theory: The relationship between grain formation and nucleant selection , 2011 .

[458]  Y. Shin,et al.  A novel integrated model combining Cellular Automata and Phase Field methods for microstructure evolution during solidification of multi-component and multi-phase alloys , 2011 .

[459]  C. Körner,et al.  Mesoscopic simulation of selective beam melting processes , 2011 .

[460]  S. Biamino,et al.  Electron beam melting of Ti–48Al–2Cr–2Nb alloy: Microstructure and mechanical properties investigation , 2011 .

[461]  G. Frommeyer,et al.  Microstructure and mechanical properties of nickel based superalloy IN718 produced by rapid prototyping with electron beam melting (EBM) , 2011 .

[462]  C. Selcuk.  Laser metal deposition for powder metallurgy parts , 2011 .

[463]  Y. Kaneno,et al.  Alloying Behavior of Ni3M-Type Compounds with D0a Structure , 2011 .

[464]  Weidong Huang,et al.  The effect of laser scanning path on microstructures and mechanical properties of laser solid formed nickel-base superalloy Inconel 718 , 2011 .

[465]  M. Preuss,et al.  Residual stresses in laser direct metal deposited Waspaloy , 2011 .

[466]  Weidong Huang,et al.  Microstructure and residual stress of laser rapid formed Inconel 718 nickel-base superalloy , 2011 .

[467]  Jan Bültmann,et al.  Design of an Optical system for the In Situ Process Monitoring of Selective Laser Melting (SLM) , 2011 .

[468]  F. Binczyk,et al.  Modification of macrostructure of nickel superalloys with cobalt nanoparticles , 2011 .

[469]  H. M. Wang,et al.  Microstructure and mechanical properties of rapid directionally solidified Ni-base superalloy Rene′41 by laser melting deposition manufacturing , 2010 .

[470]  Michael F. Zäh,et al.  Investigations on residual stresses and deformations in selective laser melting , 2010, Prod. Eng..

[471]  J. B. Singh,et al.  Evolution of δ Phase Microstructure in Alloy 718 , 2010 .

[472]  Andrey V. Gusarov,et al.  Modeling the interaction of laser radiation with powder bed at selective laser melting , 2010 .

[473]  Jean-Pierre Kruth,et al.  Quality control of laser- and powder bed-based Additive Manufacturing (AM) technologies , 2010 .

[474]  Jesse Zhu,et al.  Characterization of powder flow: Static and dynamic testing , 2009 .

[475]  L. Xue,et al.  Fatigue behavior of laser consolidated IN-625 at room and elevated temperatures , 2009 .

[476]  J. Mazumder,et al.  Laser aided direct metal deposition of Inconel 625 superalloy: Microstructural evolution and thermal stability , 2009 .

[477]  Weidong Huang,et al.  The effect of hot isostatic pressing on crack healing, microstructure, mechanical properties of Rene88DT superalloy prepared by laser solid forming , 2009 .

[478]  M. Zaeh,et al.  Examination of the powder spreading effect in Electron Beam Melting (EBM) , 2009 .

[479]  Sirong Yu,et al.  Compressive property and energy absorption characteristic of open-cell ZA22 foams , 2009 .

[480]  Fujun Wang,et al.  Online study of cracks during laser cladding process based on acoustic emission technique and finite element analysis , 2008 .

[481]  M. Hayakawa,et al.  High-temperature fatigue properties of austenitic superalloys 718, A286 and 304L , 2008 .

[482]  J. Mcgee,et al.  The Mechanism of Ductility Dip Cracking in Nickel-Chromium Alloys : Subsolidus cracking results from global stresses produced during fusion welding and local stresses generated when coherent or partially coherent second phases form , 2008 .

[483]  F. Schimansky,et al.  Recent Advances of Titanium Alloy Powder Production by Ceramic-free Inert Gas Atomization , 2008 .

[484]  Kamran Mumtaz,et al.  High density selective laser melting of Waspaloy , 2008 .

[485]  V. Esin,et al.  Model for the porosity growth in single-crystal nickel-base superalloys during homogenization , 2007 .

[486]  T. Krause,et al.  Investigation of Optimum Field Amplitude for Stress Dependence of Magnetic Barkhausen Noise , 2007, IEEE Transactions on Magnetics.

[487]  Todd Palmer,et al.  Heat transfer and fluid flow during keyhole mode laser welding of tantalum, Ti–6Al–4V, 304L stainless steel and vanadium , 2007 .

[488]  Yifu Shen,et al.  Balling phenomena during direct laser sintering of multi-component Cu-based metal powder , 2007 .

[489]  Jyoti Mazumder,et al.  Transport phenomena during direct metal deposition , 2007 .

[490]  G. Appa Rao,et al.  Effect of oxygen content of powder on microstructure and mechanical properties of hot isostatically pressed superalloy Inconel 718 , 2006 .

[491]  J. Kruth,et al.  Residual stresses in selective laser sintering and selective laser melting , 2006 .

[492]  Lin Li,et al.  Thermal and microstructural aspects of the laser direct metal deposition of waspaloy , 2006 .

[493]  Patrick M. Kelly,et al.  Edge-to-edge matching—The fundamentals , 2006 .

[494]  O. Ojo,et al.  On the role of liquated γ′ precipitates in weld heat affected zone microfissuring of a nickel-based superalloy , 2005 .

[495]  Lin Xiao,et al.  Effect of boron and carbon on the fracture toughness of IN 718 superalloy at room temperature and 650 °C , 2005 .

[496]  Yuzuru Sato,et al.  Viscosities of Fe–Ni, Fe–Co and Ni–Co binary melts , 2005 .

[497]  Christ Glorieux,et al.  Photopyroelectric measurement of thermal conductivity of metallic powders , 2005 .

[498]  Thomas Böllinghaus,et al.  Hot Cracking Phenomena in Welds III , 2005 .

[499]  J. Lippold,et al.  High temperature behavior of Ni-base weld metal: Part II – Insight into the mechanism for ductility dip cracking , 2004 .

[500]  Jacques Lacaze,et al.  Short term precipitation kinetics of delta phase in strain free Inconel* 718 alloy , 2004 .

[501]  M. Henderson,et al.  Nickel based superalloy welding practices for industrial gas turbine applications , 2004 .

[502]  G. Osinkolu,et al.  Fatigue crack growth in polycrystalline IN 718 superalloy , 2003 .

[503]  M. L. Griffith,et al.  Residual stresses in components formed by the laserengineered net shaping (LENS®) process , 2003 .

[504]  Peter D. Lee,et al.  A model of solidification microstructures in nickel-based superalloys: predicting primary dendrite spacing selection , 2003 .

[505]  S. David,et al.  Welding: Solidification and microstructure , 2003 .

[506]  Leon L. Shaw,et al.  Thermal and stress modeling of multi-material laser processing , 2001 .

[507]  Stefan Carlsson,et al.  On the determination of residual stress and strain fields by sharp indentation testing.: Part I: theoretical and numerical analysis , 2001 .

[508]  W. Kurz,et al.  SINGLE-CRYSTAL LASER DEPOSITION OF SUPERALLOYS: PROCESSING-MICROSTRUCTURE MAPS , 2001 .

[509]  Roger C. Reed,et al.  Numerical analysis of the weldability of superalloys , 2001 .

[510]  Dieter Siebörger,et al.  Temperature dependence of the elastic moduli of the nickel-base superalloy CMSX-4 and its isolated phases , 2001 .

[511]  P. Kobryn,et al.  Mechanical Properties of Laser-Deposited Ti-6Al-4V , 2001 .

[512]  R. Brooks,et al.  Measurement of viscosities of metals and alloys with an oscillating viscometer , 2001 .

[513]  R. E. Schafrik,et al.  Application of Alloy 718 in GE Aircraft Engines: Past, Present and Next Five Years , 2001 .

[514]  D. Raabe.  Scaling Monte Carlo kinetics of the Potts model using rate theory , 2000 .

[515]  L. Xue,et al.  Laser consolidation of Ni-base IN-738 superalloy for repairing gas turbine blades , 2000 .

[516]  W. Soboyejo,et al.  Micromechanisms of fatigue crack growth in a forged Inconel 718 nickel-based superalloy , 1999 .

[517]  Peter D. Lee,et al.  Modelling of Marangoni effects in electron beam melting , 1998, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[518]  J. Hemanth,et al.  Effect of the cooling rate on the dendrite arm spacing and the ultimate tensile strength of cast iron , 1998 .

[519]  J. Ellis,et al.  A critical assessment of the mechanistic aspects in HAYNES 188 during low-cycle fatigue in the range 25 °C to 1000 °C , 1997 .

[520]  Mahmudur Rahman,et al.  The machinability of inconel 718 , 1997 .

[521]  Stan A David,et al.  Physical processes in fusion welding , 1995 .

[522]  M. Dao,et al.  Non-Schmid effects and localized plastic flow in intermetallic alloys , 1993 .

[523]  C. Gandin,et al.  Probabilistic modelling of microstructure formation in solidification processes , 1993 .

[524]  J. Tien,et al.  Inclusion size effect on the fatigue crack propagation mechanism and fracture mechanics of a superalloy , 1992 .

[525]  K. B. S. Rao,et al.  Effects of temperature on the low cycle fatigue behaviour of nitrogen alloyed type 316L stainless steel , 1991 .

[526]  B. Rabin,et al.  Characterization of entrapped gases in rapidly solidified powders , 1990 .

[527]  Gary S. Schajer,et al.  Measurement of Non-Uniform Residual Stresses Using the Hole-Drilling Method. Part I—Stress Calculation Procedures , 1988 .

[528]  Iris Alvarez-Armas,et al.  Strain aging effects on the cyclic behavior of austenitic stainless steels , 1988 .

[529]  J. Nilsson,et al.  Influence of temperature and microstructure on creep-fatigue of Alloy 800H , 1988 .

[530]  H. Nakajima,et al.  Effect of test temperature on tensile and fatigue properties of nickel-base heat-resistant alloys , 1987 .

[531]  V. Gerold,et al.  Cyclic hardening mechanisms in NIMONIC 80A , 1987 .

[532]  J. Hunt,et al.  Steady state columnar and equiaxed growth of dendrites and eutectic , 1984 .

[533]  Thomas W. Eagar,et al.  Temperature fields produced by traveling distributed heat sources , 1983 .

[534]  A. Pineau,et al.  Fatigue behaviour of two nickel-base alloys I: Experimental results on low cycle fatigue, fatigue crack propagation and substructures , 1982 .

[535]  K. Easterling,et al.  Phase Transformations in Metals and Alloys , 2021 .

[536]  H. Hausner.  Powder characteristics and their effect on powder processing , 1981 .

[537]  H. Mughrabi,et al.  Annihilation of dislocations during tensile and cyclic deformation and limits of dislocation densities , 1979 .

[538]  R. Larson.  Fatigue-crack growth in Inconel 718 weldments at elevated temperatures , 1978 .

[539]  A. Pineau,et al.  Low cycle fatigue behavior of inconel 718 at 298 K and 823 K , 1977 .

[540]  R. Tobler.  Low temperature effects on the fracture behaviour of a nickel base superalloy , 1976 .

[541]  R. Holt,et al.  Impurities and trace elements in nickel-base superalloys , 1976 .

[542]  Yukio Ueda,et al.  A New Measuring Method of Residual Stresses with the Aid of Finite Element Method and Reliability of Estimated Values , 1975 .

[543]  T. E. Everhart,et al.  Determination of Kilovolt Electron Energy Dissipation vs Penetration Distance in Solid Materials , 1971 .

[544]  B. L. Bramfitt.  The effect of carbide and nitride additions on the heterogeneous nucleation behavior of liquid iron , 1970 .

[545]  A. Sleeswyk.  Slow strain-hardening of ingot iron , 1958 .

[546]  D. Rosenthal,et al.  The Theory of Moving Sources of Heat and Its Application to Metal Treatments , 1946, Journal of Fluids Engineering.