Combined 3D printing technologies and material for fabrication of tactile sensors

Recently, 3D printing technology has taken the spotlight internationally with the recognition of the importance of the manufacturing industry. Currently, there are many mature 3D printing processes and materials. However, an absence of fabrication capability of smart structures such as sensors and actuators remains. In this research, we present a hybrid manufacturing process including directprint/cure (DPC) and projection-based stereolithography, along with printable materials for stretchable tactile sensors. The suggested DPC system consists of a robotically controlled micro-dispensing head, and a light curing module combined with projection stereolithography (PSL) retrofitted from a commercial projector. The materials developed in this research are based on a photocurable and stretchable liquid resin filled with multi-walled carbon nanotubes (MWNTs); this polymer/nanocomposite exhibits the piezoresistive property used in tactile sensing. We also used another hybrid process to develop a tactile sensor using a commercial machine to build the sensor body while a dispensing system was used to create the sensing elements. We have characterized the fabricated sensors with several experiments to detect the locations where forces are applied to the surfaces of the sensors. It is concluded that the suggested processes and materials are promising in developing accurate and reliable stretchable tactile sensors.

[1]  Hod Lipson,et al.  Multi-Material Freeform Fabrication of Active Systems , 2008 .

[2]  Ryan B. Wicker,et al.  Multi-material, multi-technology stereolithography , 2012 .

[3]  Ryan B. Wicker,et al.  Integrating stereolithography and direct print technologies for 3D structural electronics fabrication , 2012 .

[4]  M. Srinivasan,et al.  Tactile detection of slip: surface microgeometry and peripheral neural codes. , 1990, Journal of neurophysiology.

[5]  Kenneth O. Johnson,et al.  The roles and functions of cutaneous mechanoreceptors , 2001, Current Opinion in Neurobiology.

[6]  Kenneth O. Johnson,et al.  Tactile Functions of Mechanoreceptive Afferents Innervating the Hand , 2000, Journal of clinical neurophysiology : official publication of the American Electroencephalographic Society.

[7]  Natarajan Elango,et al.  Experimental investigations of skin-like material and computation of its material properties , 2014 .

[8]  Jae-Won Choi,et al.  Direction of slip detection for a biomimetic tactile sensor , 2012, 2012 12th International Conference on Control, Automation and Systems.

[9]  N. Karnati,et al.  Bioinspired Sinusoidal Finger Joint Synergies for a Dexterous Robotic Hand to Screw and Unscrew Objects With Different Diameters , 2013, IEEE/ASME Transactions on Mechatronics.

[10]  Yon-Kyu Park,et al.  Design concept of high-performance flexible tactile sensors with a robust structure , 2012 .

[11]  Mark A. Minor,et al.  Hybrid Force–Velocity Sliding Mode Control of a Prosthetic Hand , 2008, IEEE Transactions on Biomedical Engineering.

[12]  E. D. Engeberg,et al.  Adaptive Sliding Mode Control for Prosthetic Hands to Simultaneously Prevent Slip and Minimize Deformation of Grasped Objects , 2013, IEEE/ASME Transactions on Mechatronics.

[13]  Vladimir Mironov,et al.  Organ printing: computer-aided jet-based 3D tissue engineering. , 2003, Trends in biotechnology.

[14]  Jae-Won Choi,et al.  Direct-write/cure conductive polymer nanocomposites for 3D structural electronics , 2013 .

[15]  G.E. Loeb,et al.  Grip Control Using Biomimetic Tactile Sensing Systems , 2009, IEEE/ASME Transactions on Mechatronics.

[16]  Daniel Therriault,et al.  Ultraviolet‐Assisted Direct‐Write Fabrication of Carbon Nanotube/Polymer Nanocomposite Microcoils , 2010, Advanced materials.

[17]  Nadia Grossiord,et al.  Controlling the dispersion of multi-wall carbon nanotubes in aqueous surfactant solution , 2007 .

[18]  Yasuo Kuniyoshi,et al.  Conformable and scalable tactile sensor skin for curved surfaces , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[19]  P. Koomsap,et al.  Development of SVM rapid prototyping for scaffold fabrication , 2014 .

[20]  Fritz B. Prinz,et al.  Shape deposition manufacturing of heterogeneous structures , 1997 .

[21]  S. Lanceros-Mendez,et al.  3 Axis Capacitive Tactile Sensor and Readout Electronics , 2006, 2006 IEEE International Symposium on Industrial Electronics.

[22]  Wei Sun,et al.  Multi‐nozzle deposition for construction of 3D biopolymer tissue scaffolds , 2005 .

[23]  Jae-Won Choi,et al.  Hybrid Additive Manufacturing of 3D Compliant Tactile Sensors , 2013 .

[24]  I. Gibson,et al.  State of the art and future direction of additive manufactured scaffolds-based bone tissue engineering , 2014 .

[25]  Yuanfei Zhang,et al.  Design of a Finger-Tip Flexible Tactile Sensor for an Anthropomorphic Robot Hand , 2010, ICIRA.

[26]  Chul-Seung Kim,et al.  Human postural control against external force perturbation applied to the high-back , 2009 .

[27]  Eric B Duoss,et al.  Direct-write assembly of microperiodic planar and spanning ITO microelectrodes. , 2010, Chemical communications.

[28]  Ivan Poupyrev,et al.  Printed optics: 3D printing of embedded optical elements for interactive devices , 2012, UIST.

[29]  J. Lewis,et al.  Conformal Printing of Electrically Small Antennas on Three‐Dimensional Surfaces , 2011, Advanced materials.

[30]  Hod Lipson,et al.  Fabricated: The New World of 3D Printing , 2013 .

[31]  Jae-Won Choi,et al.  Direct-Write Stretchable Sensors Using Single-Walled Carbon Nanotube/Polymer Matrix , 2013 .

[32]  Ryan B. Wicker,et al.  3D printing of electro mechanical systems , 2013 .

[33]  Kaspar Althoefer,et al.  Tactile sensing for dexterous in-hand manipulation in robotics-A review , 2011 .

[34]  Hod Lipson,et al.  Direct Freeform Fabrication of Seeded Hydrogels in Arbitrary Geometries , 2022 .

[35]  Martin Lévesque,et al.  Direct-write fabrication of freestanding nanocomposite strain sensors , 2012, Nanotechnology.

[36]  Daisuke Shoji,et al.  Printed Origami Structures , 2010, Advanced materials.

[37]  J. Lewis,et al.  Direct writing in three dimensions , 2004 .

[38]  E. Engeberg,et al.  Force and slip detection with direct-write compliant tactile sensors using multi-walled carbon nanotube/polymer composites , 2013 .

[39]  Ming-Fa Hsieh,et al.  Fabrication of synthesized PCL‐PEG‐PCL tissue engineering scaffolds using an air pressure‐aided deposition system , 2011 .

[40]  Sung-Hoon Ahn,et al.  Direct metal printing of 3D electrical circuit using rapid prototyping , 2009 .

[41]  John A. Rogers,et al.  Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes , 2009, Science.

[42]  Nigel H. Lovell,et al.  A review of tactile sensing technologies with applications in biomedical engineering , 2012 .

[43]  Tim Caffrey,et al.  Wohlers report 2013 : additive manufacturing and 3D printing state of the industry : annual worldwide progress report , 2013 .

[44]  Ryan B. Wicker,et al.  Multi-material microstereolithography , 2010 .

[45]  E. Engeberg,et al.  Direct-write of multi-layer tactile sensors , 2013, 2013 13th International Conference on Control, Automation and Systems (ICCAS 2013).

[46]  Y. Wong,et al.  Direct writing of chitosan scaffolds using a robotic system , 2005 .

[47]  Ryan B. Wicker,et al.  Electronics integration in conformal substrates fabricated with additive layered manufacturing , 2009 .

[48]  J. Lewis,et al.  3D Printing of Interdigitated Li‐Ion Microbattery Architectures , 2013, Advanced materials.

[49]  E. Engeberg,et al.  Detection of the direction and speed of motion of forces on the surface of a compliant tactile sensor , 2013, 2013 13th International Conference on Control, Automation and Systems (ICCAS 2013).

[50]  E. Engeberg,et al.  Detection of the position, direction and speed of sliding contact with a multi-layer compliant tactile sensor fabricated using direct-print technology , 2014 .