Protective devices are needed in electronic systems to protect against voltage surges. In this paper, a monolithic device incorporating both the functions of a capacitor and a varistor is described. The device has a capacitance of 1 μF and a dissipation factor less than 0.05 between 1 and 100 kHz. At voltages greater than the threshold voltage, V0, of about 15 volts, the device conducts a current, I, according to the power-law relation of varistors, I=AVα. The nonlinearity index, α, is 11.4. In this device, the capacitor function protects against the lowamplitude and high-frequency transients while the varistor function protects against the high-amplitude voltage surges. Appropriate capacitor and varistor composition can be found to have similar sintering temperatures, allowing the fabrication of monolithic devices with a range of sintering temperatures between 900° and 1350°C.
[1]
W. W. Rhodes,et al.
Phase stability in pb(b½ '3+b″5+ ½)o3 and pb(b½ '3+b″5+ ½)o3 compositions
,
1989
.
[2]
Thomas R. Shrout,et al.
Dielectric properties of lead-magnesium niobate ceramics
,
1984
.
[3]
M. Fukui,et al.
SrTiO3-based boundary layer capacitor having varistor characteristics
,
1983
.
[4]
M. Yonezawa.
Low-firing multilayer capacitor materials
,
1983
.
[5]
H. R. Philipp,et al.
Theory of conduction in ZnO varistors
,
1979
.
[6]
M. Matsuoka.
Nonohmic Properties of Zinc Oxide Ceramics
,
1971
.