Controlling Morphology in 3D Printing

3D printing is rapidly becoming one of the most disruptive ideas of the 21st century greatly impacting how products are manufactured and made available to society. The intense research and development of additive technologies registered over the past decade is leading 3D printed objects to compete with conventionally manufactured goods. Furthermore, this concept has encouraged the creation of new products that would otherwise face production constraints due to high geometric complexity.

[1]  Chee Kai Chua,et al.  Investigation of 3D Non-Random Porous Structures by Fused Deposition Modelling , 2002 .

[2]  J. Giannatsis,et al.  Additive fabrication technologies applied to medicine and health care: a review , 2009 .

[3]  Kaufui Wong,et al.  A Review of Additive Manufacturing , 2012 .

[4]  M Bohner,et al.  Structural and material approaches to bone tissue engineering in powder-based three-dimensional printing. , 2011, Acta biomaterialia.

[5]  Qian Sun,et al.  Modeling of Bond Formation Between Polymer Filaments in the Fused Deposition Modeling Process , 2004 .

[6]  Sanjay G. Dhande,et al.  Real time adaptive slicing for fused deposition modelling , 2003 .

[7]  Andrea Gatto,et al.  Benchmarking of Rapid Prototyping Techniques in Terms of Dimensional Accuracy and Surface Finish , 1995 .

[8]  Luigi Maria Galantucci,et al.  Experimental study aiming to enhance the surface finish of fused deposition modeled parts , 2009 .

[9]  R. Landers,et al.  Biofunctional rapid prototyping for tissue‐engineering applications: 3D bioplotting versus 3D printing , 2004 .

[10]  Robert J. Strong,et al.  A review of melt extrusion additive manufacturing processes: I. Process design and modeling , 2014 .

[11]  Ho-Chan Kim,et al.  Surface roughness prediction using measured data and interpolation in layered manufacturing , 2009 .

[12]  David W. Rosen,et al.  Generalized Additive Manufacturing Process Chain , 2020, Additive Manufacturing Technologies.

[13]  W RosenDavid,et al.  The Roadmap for Additive Manufacturing and Its Impact , 2014 .

[14]  Syed H. Masood,et al.  Development of new metal/polymer materials for rapid tooling using Fused deposition modelling , 2004 .

[15]  N. Venkata Reddy,et al.  Optimum part deposition orientation in fused deposition modeling , 2004 .

[16]  Geoffrey R. Mitchell,et al.  Stereo‐thermal‐lithography: a new principle for rapid prototyping , 2003 .

[17]  Vojislav Petrovic,et al.  Additive layered manufacturing: sectors of industrial application shown through case studies , 2011 .

[18]  Guha Manogharan,et al.  Making sense of 3-D printing: Creating a map of additive manufacturing products and services , 2014 .

[19]  Caroline Sunyong Lee,et al.  Measurement of anisotropic compressive strength of rapid prototyping parts , 2007 .

[20]  K. Hon,et al.  Selective Laser Sintering of SiC/Polyamide Composites , 2003 .

[21]  R. Crawford,et al.  Solid Freeform Fabrication: A New Direction in Manufacturing , 1997 .

[22]  Constance W. Ziemian,et al.  Anisotropic Mechanical Properties of ABS Parts Fabricated by Fused Deposition Modelling , 2012 .

[23]  S. Arunachalam,et al.  Critical parameters influencing the quality of prototypes in fused deposition modelling , 2001 .

[24]  F. Melchels,et al.  A review on stereolithography and its applications in biomedical engineering. , 2010, Biomaterials.

[25]  David W. Rosen,et al.  Development of Additive Manufacturing Technology , 2010 .

[26]  M. A. Alhnan,et al.  Fabrication of extended-release patient-tailored prednisolone tablets via fused deposition modelling (FDM) 3D printing. , 2015, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

[27]  Dar-Yuan Chang,et al.  Studies on profile error and extruding aperture for the RP parts using the fused deposition modeling process , 2011 .

[28]  Ruth Jill Urbanic,et al.  An Optimization Approach for Components Built by Fused Deposition Modeling with Parametric Internal Structures , 2014 .

[29]  Seok-Hee Lee,et al.  Representation of surface roughness in fused deposition modeling , 2009 .

[30]  S. Rabiej,et al.  Determination of the parameters of lamellar structure of semicrystalline polymers using a computer program SAXSDAT , 2011 .

[31]  S. Teoh,et al.  Polycaprolactone-based fused deposition modeled mesh for delivery of antibacterial agents to infected wounds. , 2011, Biomaterials.

[32]  Dominik Rietzel,et al.  Additive Processing of Polymers , 2008 .

[33]  K. Lozano,et al.  Nanofiber-reinforced polymers prepared by fused deposition modeling , 2003 .

[34]  N. V. Reddy,et al.  Fused deposition modelling using direct extrusion , 2007 .

[35]  Mohd Rizal Alkahari,et al.  Analysis on fused deposition modelling performance , 2010 .

[36]  L. Love,et al.  Highly oriented carbon fiber–polymer composites via additive manufacturing , 2014 .

[37]  P. Bártolo,et al.  Structure development during additive manufacturing , 2013 .