A Data-Driven Adaptive Sampling Method Based on Edge Computing

The rise of edge computing has promoted the development of the industrial internet of things (IIoT). Supported by edge computing technology, data acquisition can also support more complex and perfect application requirements in industrial field. Most of traditional sampling methods use constant sampling frequency and ignore the impact of changes of sampling objects during the data acquisition. For the problem of sampling distortion, edge data redundancy and energy consumption caused by constant sampling frequency of sensors in the IIoT, a data-driven adaptive sampling method based on edge computing is proposed in this paper. The method uses the latest data collected by the sensors at the edge node for linear fitting and adjusts the next sampling frequency according to the linear median jitter sum and adaptive sampling strategy. An edge data acquisition platform is established to verify the validity of the method. According to the experimental results, the proposed method is more effective than other adaptive sampling methods. Compared with constant sampling frequency, the proposed method can reduce the edge data redundancy and energy consumption by more than 13.92% and 12.86%, respectively.

[1]  Dimitris Mourtzis,et al.  Industrial Big Data as a Result of IoT Adoption in Manufacturing , 2016 .

[2]  Shishupal Kumar,et al.  A Strategy for Elimination of Data Redundancy in Internet of Things (IoT) Based Wireless Sensor Network (WSN) , 2019, IEEE Systems Journal.

[3]  Yan Zhang,et al.  Mobile Edge Computing: A Survey , 2018, IEEE Internet of Things Journal.

[4]  Dave Evans,et al.  How the Next Evolution of the Internet Is Changing Everything , 2011 .

[5]  Andrew Kusiak,et al.  Data-driven smart manufacturing , 2018, Journal of Manufacturing Systems.

[6]  Pankaj Jood,et al.  Remote Monitoring Energy Management System using LonWorks and Modbus Communication Protocol , 2015 .

[7]  Fernando Boavida,et al.  Industrial IoT Monitoring: Technologies and Architecture Proposal , 2018, Sensors.

[8]  Shuguo Xie,et al.  Piece-wise vector fitting method with binary frequency domain partitioning algorithm for automatic modeling , 2016, 2016 IEEE International Conference on Microwave and Millimeter Wave Technology (ICMMT).

[9]  Xinyu Yang,et al.  A Survey on the Edge Computing for the Internet of Things , 2018, IEEE Access.

[10]  Xuegang Ban,et al.  State-dependent self-adaptive sampling (SAS) method for vehicle trajectory data , 2019 .

[11]  W. Ye,et al.  An efficient adaptive frequency sampling scheme for large-scale transient boundary element analysis , 2015, 1511.04355.

[12]  Ilaria Scarabottolo,et al.  A spectrum-based adaptive sampling algorithm for smart sensing , 2017, 2017 IEEE SmartWorld, Ubiquitous Intelligence & Computing, Advanced & Trusted Computed, Scalable Computing & Communications, Cloud & Big Data Computing, Internet of People and Smart City Innovation (SmartWorld/SCALCOM/UIC/ATC/CBDCom/IOP/SCI).

[13]  Hailu Yang,et al.  The Development and Field Evaluation of an IoT System of Low-Power Vibration for Bridge Health Monitoring , 2019, Sensors.

[14]  Aamir Mahmood,et al.  Fog Computing Enabling Industrial Internet of Things: State-of-the-Art and Research Challenges , 2019, Sensors.

[15]  Marko Grobelnik,et al.  A Capillary Computing Architecture for Dynamic Internet of Things: Orchestration of Microservices from Edge Devices to Fog and Cloud Providers , 2018, Sensors.

[16]  Haoxiang Wang,et al.  Efficient IoT-based sensor BIG Data collection-processing and analysis in smart buildings , 2017, Future Gener. Comput. Syst..

[17]  M. Chodyka,et al.  Raspberry PI 3B + microcomputer as a central control unit in intelligent building automation management systems , 2018 .

[18]  Xinping Guan,et al.  An Adaptive Sampling Algorithm for Target Tracking in Underwater Wireless Sensor Networks , 2018, IEEE Access.

[19]  Nathalie Mitton,et al.  LEGIoT: A Lightweight Edge Gateway for the Internet of Things , 2018, Future Gener. Comput. Syst..

[20]  Zhenlong Li,et al.  Big Data and cloud computing: innovation opportunities and challenges , 2017, Int. J. Digit. Earth.

[21]  Daoqu Geng,et al.  Big Data-Based Improved Data Acquisition and Storage System for Designing Industrial Data Platform , 2019, IEEE Access.

[22]  Renata Imaculada Soares Pereira,et al.  IoT embedded linux system based on Raspberry Pi applied to real-time cloud monitoring of a decentralized photovoltaic plant , 2018 .

[23]  Min Xia,et al.  An Energy Efficient Adaptive Sampling Algorithm in a Sensor Network for Automated Water Quality Monitoring , 2017, Sensors.

[24]  Tarik Taleb,et al.  Survey on Multi-Access Edge Computing for Internet of Things Realization , 2018, IEEE Communications Surveys & Tutorials.

[25]  Weisong Shi,et al.  Edge Computing: Vision and Challenges , 2016, IEEE Internet of Things Journal.

[26]  Hong Jiang,et al.  EdgeDB: An Efficient Time-Series Database for Edge Computing , 2019, IEEE Access.

[27]  Li Zhang,et al.  Research on the overall architecture of Internet of Things middleware for intelligent industrial parks , 2020, The International Journal of Advanced Manufacturing Technology.

[28]  Kyoungho Ahn,et al.  Development and Testing of a 3G/LTE Adaptive Data Collection System in Vehicular Networks , 2016, IEEE Transactions on Intelligent Transportation Systems.

[29]  Jie Wu,et al.  e-Sampling , 2017, ACM Trans. Auton. Adapt. Syst..

[30]  Jianli Pan,et al.  Future Edge Cloud and Edge Computing for Internet of Things Applications , 2018, IEEE Internet of Things Journal.

[31]  Qin Zhang,et al.  Edge Computing in IoT-Based Manufacturing , 2018, IEEE Communications Magazine.