Dual-Band SIW Differential Bandpass Filter With Improved Common-Mode Suppression

A dual-band differential bandpass filter with controllable differential-mode (DM) center frequencies, and high common-mode (CM) suppression as well as band-to-band isolation, is proposed in this letter. The presented filter is implemented based on the substrate integrated waveguide (SIW) technology. The first DM passband can be derived by the dominant modes, while the second DM passband response can be obtained by employing the higher order modes. The center frequencies of two DM passbands can be tuned by changing the dimension parameters. To improve the CM suppression, four slotlines with different locations are etched on the top metal plane. The measured and simulated results are in good agreement.

[1]  Quan Xue,et al.  Novel Balanced Dual-Band Bandpass Filter Using Coupled Stepped-Impedance Resonators , 2010, IEEE Microwave and Wireless Components Letters.

[2]  Gang Zhang,et al.  Design of balanced dual-band bandpass filter based on substrate integrated waveguide , 2013 .

[3]  Young-Ho Cho,et al.  Design of Balanced Dual-Band Bandpass Filters Using Asymmetrical Coupled Lines , 2013, IEEE Transactions on Microwave Theory and Techniques.

[4]  Ke Wu,et al.  Substrate Integrated Waveguide Cross-Coupled Filter With Negative Coupling Structure , 2008, IEEE Transactions on Microwave Theory and Techniques.

[6]  R. Elliott Antenna Theory and Design , 2003 .

[7]  C.-I.G. Hsu,et al.  Balanced Dual-Band BPF With Stub-Loaded SIRs for Common-Mode Suppression , 2010, IEEE Microwave and Wireless Components Letters.