Product recovery from Li-ion battery wastes coming from an industrial pre-treatment plant: Lab scale tests and process simulations

Abstract In this paper two hydrometallurgical processes were analyzed for recovery of lithium and cobalt from lithium ion batteries. The effect of adding a secondary purification step by solvent extraction was evaluated in terms of product purity and economical feasibility of the process. Process routes were made of the following steps: mechanical pretreatment, leaching, primary (and secondary) purification, product recovery. Electrodic material used in leaching experiments was produced in a large scale pre-treatment plant for waste recycling. Leaching tests were performed both using chloridric acid and sulphuric acid plus glucose. In optimized conditions quantitative extraction of Co and Li were obtained for both tested systems. Iron, aluminum and copper were removed by precipitation as hydroxides, while Ni can be separated only using solvent extraction. Process simulations showed that, for the same input flow rate of batteries, the addition of solvent extraction improves the economical feasibility of the process for lithium ion battery recovery.

[1]  Jéssica Frontino Paulino,et al.  Recovery of valuable elements from spent Li-batteries. , 2008, Journal of hazardous materials.

[2]  Junmin Nan,et al.  Recovery of metal values from spent lithium-ion batteries with chemical deposition and solvent extraction , 2005 .

[3]  Jinki Jeong,et al.  Development of process flow sheet for recovery of high pure cobalt from sulfate leach liquor of LIB industry waste: A mathematical model correlation to predict optimum operational conditions , 2008 .

[4]  R. P. Das,et al.  Extraction studies of cobalt (II) and nickel (II) from chloride solutions using Na-Cyanex 272.: Separation of Co(II)/Ni(II) by the sodium salts of D2EHPA, PC88A and Cyanex 272 and their mixtures , 1999 .

[5]  F. Ferella,et al.  Recovery of manganese from zinc alkaline batteries by reductive acid leaching using carbohydrates as reductant , 2009 .

[6]  Marcelo Borges Mansur,et al.  A study of the separation of cobalt from spent Li-ion battery residues , 2007 .

[7]  Denise Crocce Romano Espinosa,et al.  Recycling of batteries: a review of current processes and technologies , 2004 .

[8]  Young Han Kim,et al.  Development of a metal recovery process from Li-ion battery wastes , 2005 .

[9]  Feng Wu,et al.  Recovery of cobalt and lithium from spent lithium ion batteries using organic citric acid as leachant. , 2010, Journal of hazardous materials.

[10]  Bruno Scrosati,et al.  A laboratory-scale lithium-ion battery recycling process , 2001 .

[11]  Kang-In Rhee,et al.  Reductive leaching of cathodic active materials from lithium ion battery wastes , 2003 .

[12]  Marcelo Borges Mansur,et al.  Hydrometallurgical separation of aluminium, cobalt, copper and lithium from spent Li-ion batteries , 2009 .

[13]  Jinki Jeong,et al.  Hydrometallurgical process for recovery of cobalt from waste cathodic active material generated during manufacturing of lithium ion batteries , 2007 .

[14]  Florence Ansart,et al.  Advances in the recovering of spent lithium battery compounds , 2002 .

[15]  Katsutoshi Inoue,et al.  Hydrometallurgical process for recovery of metal values from spent lithium-ion secondary batteries , 1998 .

[16]  B. D. Pandey,et al.  Recovery of copper, nickel and cobalt from the leach liquor of a sulphide concentrate by solvent extraction , 2004 .