Design of the Modified PID Speed Controller to Reduce the Speed Ripple

PMSM(Permanent Magnet Synchronous Motor) has periodic torque ripple from the cogging torque and load conditions. This paper proposes the modified PID speed controller to reduce the speed ripple of the PMSM. The proposed modified PID controller uses a selective D(Differential) control term according to the speed error and the differential of the speed error. The proposed speed controller produces an additional torque reference such as torque compensator based on PI controller according to the speed error and the differential of the speed error, and it can reduce the vibration of the conventional D-control term with reduced speed ripple. Since the additional torque reference of the proposed speed controller is changed by the sign of the speed error and the differential of the speed error, a simple function to determine the sign of the error is used to produce the compensated torque. The proposed control scheme is verified by the computer simulation and the experiments.

[1]  K.R. Rajagopal,et al.  PM Synchronous Motor Speed Control Using Hybrid Fuzzy-PI With Novel Switching Functions , 2009, IEEE Transactions on Magnetics.

[2]  Yongchang Zhang,et al.  Direct Torque Control of Permanent Magnet Synchronous Motor With Reduced Torque Ripple and Commutation Frequency , 2011, IEEE Transactions on Power Electronics.

[3]  A.M. Khambadkone,et al.  Torque ripple analysis and dynamic performance of a space vector modulation based control method for AC-drives , 2005, IEEE Transactions on Power Electronics.

[4]  Yongchang Zhang,et al.  A Simple Method to Reduce Torque Ripple in Direct Torque-Controlled Permanent-Magnet Synchronous Motor by Using Vectors With Variable Amplitude and Angle , 2011, IEEE Transactions on Industrial Electronics.

[5]  G. Narayanan,et al.  Minimization of Torque Ripple in PWM AC Drives , 2009, IEEE Transactions on Industrial Electronics.

[6]  Fayez F. M. El-Sousy.  Robust Adaptive Wavelet-Neural-Network Sliding-Mode Speed Control for a DSP-Based PMSM Drive System , 2010 .

[7]  S.D. Pekarek,et al.  Compensation for Asymmetries and Misalignment in a Hall-Effect Position Observer Used in PMSM Torque-Ripple Control , 2007, IEEE Transactions on Industry Applications.

[8]  Lee Dong-Hee,et al.  A Nonlinear Friction Torque Compensation of Servo System with Double Speed Controller , 2004 .

[9]  M N Uddin,et al.  An Adaptive-Filter-Based Torque-Ripple Minimization of a Fuzzy-Logic Controller for Speed Control of IPM Motor Drives , 2011, IEEE Transactions on Industry Applications.

[10]  Yongchang Zhang,et al.  A Novel Duty Cycle Control Strategy to Reduce Both Torque and Flux Ripples for DTC of Permanent Magnet Synchronous Motor Drives With Switching Frequency Reduction , 2011, IEEE Transactions on Power Electronics.

[11]  S.K. Panda,et al.  Speed ripple minimization in PM synchronous motor using iterative learning control , 2005, IEEE Transactions on Energy Conversion.

[12]  Dong-Hee Lee.  A Vibration Rejection of Linear Feeder System with PMSM using Adaptive Notch Filter , 2006 .