Impact of the nature of the compliant electrodes on the dielectric constant of acrylic and silicone electroactive polymers

Dielectric elastomers are emerging electroactive materials used in high performance applications such as robots, artificial muscles and energy harvesting. The development of such applications requires the use of accurate, predictive, reliable models which take into account the dielectric constant (permittivity) of these materials. This dielectric constant is not clearly defined for such applications and depends on many parameters. This leads to values dispersed in the literature for the same electroactive polymer. This paper shows that the nature of the compliant electrodes can influence this dielectric constant significantly. However, the reduction generally observed in this permittivity according to the stretching of elastomer cannot be imputed to the nature of these electrodes, and rather confirms an effect of the volume of the elastomer. This tends to prove that the influence of the compliant electrode is located at the electrode–elastomer interfaces. In addition, the nature of the metallic particles embedded in the electrode grease seems not to influence the value of the dielectric constant. Lastly, we propose analytic laws to describe changes of the dielectric constant as a function of the temperature and the deformation of the material. This makes it possible to define new limits of operation for these polymers for actuators and energy harvesting applications.

[1]  U. W. Gedde,et al.  Hydrophobic recovery of polydimethylsiloxane after exposure to partial discharges as a function of crosslink density , 2001 .

[2]  C Jordi,et al.  Fish-like propulsion of an airship with planar membrane dielectric elastomer actuators , 2010, Bioinspiration & biomimetics.

[3]  S. K. Venkataraman,et al.  Critical extent of reaction of a polydimethylsiloxane polymer network , 1989 .

[4]  Alberto M. Cuitiño,et al.  Modeling and simulation of the coupled mechanical–electrical response of soft solids , 2011 .

[5]  Zicai Zhu,et al.  Effect of mechanical pre-stretch on the stabilization of dielectric elastomer actuation , 2011 .

[6]  Ron Pelrine,et al.  Current status and future prospects of power generators using dielectric elastomers , 2011 .

[7]  G. Kofod.  The static actuation of dielectric elastomer actuators: how does pre-stretch improve actuation? , 2008 .

[8]  Silvain Michel,et al.  Performance evaluation of cutting-edge dielectric elastomers for large-scale actuator applications , 2011 .

[9]  Zhigang Suo,et al.  Electrostriction in elastic dielectrics undergoing large deformation , 2008 .

[10]  Jinsong Leng,et al.  Thermo-electro-mechanical instability of dielectric elastomers , 2011 .

[11]  Edoardo Mazza,et al.  Electromechanical coupling in dielectric elastomer actuators , 2007 .

[12]  Thomas G. McKay,et al.  The dielectric constant of 3M VHB: a parameter in dispute , 2009, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[13]  Kimball A. Milton,et al.  Repulsive Casimir and Casimir–Polder forces , 2012, 1202.6415.

[14]  Seyed Reza Ghaffarian,et al.  Effect of Different Electrode Materials on the Performance of Smart Composite Actuators Based on Dielectric Elastomers , 2007 .

[15]  R. Pelrine,et al.  Actuation Response of Polyacrylate Dielectric Elastomers , 2003 .

[16]  A. Sylvestre,et al.  Estimation of surface degradation under immersion plasma by surface potential decay method [polymer outdoor insulation applications] , 2004, The 17th Annual Meeting of the IEEE Lasers and Electro-Optics Society, 2004. LEOS 2004..

[17]  Q. Pei,et al.  High-field deformation of elastomeric dielectrics for actuators , 2000 .

[18]  Matthias Wessling,et al.  Effect of PDMS cross-linking degree on the permeation performance of PAN/PDMS composite nanofiltration membranes , 2005 .

[19]  Peter Sommer-Larsen,et al.  Silicone dielectric elastomer actuators: Finite-elasticity model of actuation , 2005 .

[20]  S. Karlsson,et al.  Characterisation of low molar mass siloxanes extracted from crosslinked polydimethylsiloxanes exposed to corona discharges , 2001 .

[21]  Hualing Chen,et al.  Effect of temperature on the stability of dielectric elastomers , 2011 .

[22]  Yves Leterrier,et al.  Frequency dependent dielectric and mechanical behavior of elastomers for actuator applications , 2009 .

[23]  G. Vigier,et al.  Molecular mobility of crosslinked elastomers stretched above Tg , 2006 .

[24]  Skandar Basrour,et al.  Dielectric properties of polyacrylate thick films used in sensors and actuators , 2010 .

[25]  Iain A. Anderson,et al.  Dielectric elastomer switches for smart artificial muscles , 2010 .

[26]  Guggi Kofod,et al.  Matrix stiffness dependent electro-mechanical response of dipole grafted silicones , 2012 .

[27]  Shinzo Kohjiya,et al.  Strain-induced crystallization of peroxide-crosslinked natural rubber , 2007 .

[28]  Kumbakonam R. Rajagopal,et al.  A study of strain-induced crystallization of polymers , 2001 .

[29]  Hidetoshi Kotera,et al.  Concepts for a new class of all-polymer micropumps. , 2006, Lab on a chip.

[30]  Minyoung Jung,et al.  Effects of prestrain on behavior of dielectric elastomer actuator , 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[31]  Peter Sommer-Larsen,et al.  Performance of dielectric elastomer actuators and materials , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[32]  M. Gottlieb,et al.  Effect of crosslinks on the glass transition temperature of end-linked elastomers , 1992 .