Method for simulating the performance of a boundary layer ingesting propulsion system at design and off-design

Abstract Boundary layer ingestion has emerged as a potential propulsion concept on novel aircraft configurations for the future. As these concepts progress, preliminary design tools are required that enable the simulation of these aircraft and the rapid analysis of multiple configurations. Simulation tools for boundary layer ingesting propulsion systems tend to focus on proving performance benefits at design point. However, the simulation of aircraft configurations that utilise boundary layer ingestion requires a method to simulate the propulsion system at a range of flight conditions other than design point. A tool is therefore required to enable simulations at off-design. This research presents a work flow to simulate a boundary layer ingesting propulsion system at design and off-design. The process is intended as a tool for design space exploration and the rapid analysis of concepts at the conceptualisation phase. Boundary layer calculations have been combined with conventional 1-D gas turbine performance methods to predict performance of a propulsion system at design point. This method is then extended to enable simulations at off-design conditions for a range of flight conditions or propulsion system power settings. The formulation provides a thrust-drag representation that supports conventional aircraft simulation tools. A case study of an aircraft configuration which utilises an array of boundary layer ingesting propulsors is used to demonstrate the process. The performance of individual propulsors in the array is compared at off-design. Simulations found that, although each propulsor was sized for the same propulsive force at design point, off-design performance diverged depending on operating conditions. In addition, the performance of the propulsor array as a whole was predicted as a function of altitude and Mach number. The case study is used to draw general conclusions on the performance characteristics of a boundary layer ingesting propulsor.

[1]  Gregory Tillman,et al.  Aircraft System Study of Boundary Layer Ingesting Propulsion , 2012 .

[2]  M. Drela.  Power Balance in Aerodynamic Flows , 2009 .

[3]  J. Anderson,et al.  Fundamentals of Aerodynamics , 1984 .

[4]  Gerald V. Brown,et al.  Turboelectric Distributed Propulsion Engine Cycle Analysis for Hybrid-Wing-Body Aircraft , 2009 .

[5]  Pericles Pilidis,et al.  Installed performance assessment of a boundary layer ingesting distributed propulsion system at design point , 2016 .

[6]  Olivier Atinault,et al.  Exergy-Based Formulation for Aircraft Aeropropulsive Performance Assessment: Theoretical Development , 2015 .

[7]  James L. Felder,et al.  Control Volume Analysis of Boundary Layer Ingesting Propulsion Systems With or Without Shock Wave Ahead of the Inlet , 2011 .

[8]  Carey D. Nadell,et al.  Emergence of Spatial Structure in Cell Groups and the Evolution of Cooperation , 2010, PLoS Comput. Biol..

[9]  Tom Hynes,et al.  Performance of a Boundary Layer Ingesting (BLI) propulsion system , 2007 .

[10]  Gerald V. Brown,et al.  Turboelectric Distributed Propulsion in a Hybrid Wing Body Aircraft , 2011 .

[11]  Leroy H. Smith.  Wake ingestion propulsion benefit , 1993 .

[12]  Gerald V. Brown,et al.  An Examination of the Effect of Boundary Layer Ingestion on Turboelectric Distributed Propulsion Systems , 2011 .

[13]  Panagiotis Laskaridis,et al.  Methodology to assess the performance of an aircraft concept with distributed propulsion and boundary layer ingestion using a parametric approach , 2015 .

[14]  H. Schlichting.  Boundary Layer Theory , 1955 .