A review on stereolithography and its applications in biomedical engineering.
暂无分享,去创建一个
[1] Robert Liska,et al. Vinyl esters: Low cytotoxicity monomers for the fabrication of biocompatible 3D scaffolds by lithography based additive manufacturing , 2009 .
[2] R. Liska,et al. Gelatin‐based photopolymers for bone replacement materials , 2009 .
[3] Klaus Liefeith,et al. Two-Photon Polymerization for Microfabrication of Three-Dimensional Scaffolds for Tissue Engineering Application , 2009 .
[4] Jan Feijen,et al. A poly(D,L-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography. , 2009, Biomaterials.
[5] Ryan B. Wicker,et al. Fabrication of 3D Biocompatible/Biodegradable Micro-Scaffolds Using Dynamic Mask Projection Microstereolithography , 2009 .
[6] X. Wen,et al. Chemically modified light-curable chitosans with enhanced potential for bone tissue repair. , 2009, Journal of biomedical materials research. Part A.
[7] C. Bastiaansen,et al. Monodisperse, Polymeric Nano‐ and Microsieves Produced with Interference Holography , 2009 .
[8] Dong-Woo Cho,et al. Development of nano- and microscale composite 3D scaffolds using PPF/DEF-HA and micro-stereolithography , 2009 .
[9] G. Schiroli,et al. Accuracy of computer-aided oral implant surgery: a clinical and radiographic study. , 2009, The International journal of oral & maxillofacial implants.
[10] Jan Feijen,et al. Fumaric acid monoethyl ester-functionalized poly(D,L-lactide)/N-vinyl-2-pyrrolidone resins for the preparation of tissue engineering scaffolds by stereolithography. , 2009, Biomacromolecules.
[11] Dominik Rietzel,et al. Additive Processing of Polymers , 2008 .
[12] Dong-Yol Yang,et al. Advances in 3D nano/microfabrication using two-photon initiated polymerization , 2008 .
[13] Dong-Woo Cho,et al. Application of microstereolithography in the development of three-dimensional cartilage regeneration scaffolds , 2008, Biomedical microdevices.
[14] Krishnendu Roy,et al. Projection Microfabrication of Three-Dimensional Scaffolds for Tissue Engineering , 2008 .
[15] R. Inführ,et al. Photopolymers for rapid prototyping , 2007 .
[16] C. Bowen,et al. Development of Modelling Methods for Materials to be Used as Bone Substitutes , 2007 .
[17] George Filippidis,et al. Three-dimensional biomolecule patterning , 2007 .
[18] Dong-Woo Cho,et al. 3D scaffold fabrication with PPF/DEF using micro-stereolithography , 2007 .
[19] Robert Liska,et al. Evaluation of Biocompatible Photopolymers II: Further Reactive Diluents , 2007 .
[20] Robert Liska,et al. Evaluation of Biocompatible Photopolymers I: Photoreactivity and Mechanical Properties of Reactive Diluents , 2007 .
[21] Michael J Yaszemski,et al. Poly(propylene fumarate) bone tissue engineering scaffold fabrication using stereolithography: effects of resin formulations and laser parameters. , 2007, Biomacromolecules.
[22] R. Hague,et al. A study of the impact of short-term ageing on the mechanical properties of a stereolithography resin , 2007 .
[23] Hermann Seitz,et al. Non‐toxic flexible photopolymers for medical stereolithography technology , 2007 .
[24] Ryan B. Wicker,et al. Stereolithography of Three-Dimensional Bioactive Poly(Ethylene Glycol) Constructs with Encapsulated Cells , 2006, Annals of Biomedical Engineering.
[25] Krishnendu Roy,et al. A digital micro-mirror device-based system for the microfabrication of complex, spatially patterned tissue engineering scaffolds. , 2006, Journal of biomedical materials research. Part A.
[26] T. Northen,et al. Synthesis and characterization of peptide grafted porous polymer microstructures. , 2006, Biomacromolecules.
[27] Krishnendu Roy,et al. Laser-layered microfabrication of spatially patterned functionalized tissue-engineering scaffolds. , 2005, Journal of biomedical materials research. Part B, Applied biomaterials.
[28] Shu Yang,et al. Creating Three‐Dimensional Polymeric Microstructures by Multi‐Beam Interference Lithography , 2005 .
[29] D. Kaplan,et al. Porosity of 3D biomaterial scaffolds and osteogenesis. , 2005, Biomaterials.
[30] Il Keun Kwon,et al. Photo-polymerized microarchitectural constructs prepared by microstereolithography (muSL) using liquid acrylate-end-capped trimethylene carbonate-based prepolymers. , 2005, Biomaterials.
[31] R Hetzer,et al. Tissue engineering of vascular conduits: fabrication of custom-made scaffolds using rapid prototyping techniques. , 2005, The Thoracic and cardiovascular surgeon.
[32] C. E. Corcione,et al. Laser stereolithography of ZrO2 toughened Al2O3 , 2004 .
[33] Gabriele Wurm,et al. Prospective study on cranioplasty with individual carbon fiber reinforced polymer (CFRP) implants produced by means of stereolithography. , 2004, Surgical neurology.
[34] Thomas Boland,et al. Rapid prototyping of tissue-engineering constructs, using photopolymerizable hydrogels and stereolithography. , 2004, Tissue engineering.
[35] Dietmar W Hutmacher,et al. Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems. , 2004, Trends in biotechnology.
[36] P. Ma,et al. Polymeric Scaffolds for Bone Tissue Engineering , 2004, Annals of Biomedical Engineering.
[37] V. K. Popov,et al. Laser stereolithography and supercritical fluid processing for custom-designed implant fabrication , 2004, Journal of materials science. Materials in medicine.
[38] Predrag Sukovic,et al. Accuracy of implant placement with a stereolithographic surgical guide. , 2003, The International journal of oral & maxillofacial implants.
[39] E. Kastenbauer,et al. Clinical aspects and strategy for biomaterial engineering of an auricle based on three-dimensional stereolithography , 2003, European Archives of Oto-Rhino-Laryngology.
[40] David P Sarment,et al. Stereolithographic surgical templates for placement of dental implants in complex cases. , 2003, The International journal of periodontics & restorative dentistry.
[41] Malcolm N. Cooke,et al. Use of stereolithography to manufacture critical-sized 3D biodegradable scaffolds for bone ingrowth. , 2003, Journal of biomedical materials research. Part B, Applied biomaterials.
[42] Jason A Burdick,et al. Kinetic chain lengths in highly cross-linked networks formed by the photoinitiated polymerization of divinyl monomers: a gel permeation chromatography investigation. , 2003, Biomacromolecules.
[43] Manabu Mizutani,et al. Liquid acrylate-endcapped biodegradable poly(epsilon-caprolactone-co-trimethylene carbonate). II. Computer-aided stereolithographic microarchitectural surface photoconstructs. , 2002, Journal of biomedical materials research.
[44] S. Hollister,et al. Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints. , 2002, Biomaterials.
[45] K. Ikuta,et al. Submicron stereolithography for the production of freely movable mechanisms by using single-photon polymerization , 2002 .
[46] Manabu Mizutani,et al. Liquid, phenylazide-end-capped copolymers of epsilon-caprolactone and trimethylene carbonate: preparation, photocuring characteristics, and surface layering. , 2002, Biomacromolecules.
[47] R. Mülhaupt,et al. Novel hydrogels as supports for in vitro cell growth: poly(ethylene glycol)- and gelatine-based (meth)acrylamidopeptide macromonomers. , 2002, Biomaterials.
[48] Scott J Hollister,et al. Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures. , 2002, Biomaterials.
[49] David P. Martin,et al. Application of Stereolithography for Scaffold Fabrication for Tissue Engineered Heart Valves , 2002, ASAIO journal.
[50] K. Leong,et al. The design of scaffolds for use in tissue engineering. Part I. Traditional factors. , 2001, Tissue engineering.
[51] E. Andrzejewska. Photopolymerization kinetics of multifunctional monomers , 2001 .
[52] Christophe Provin,et al. Complex ceramic-polymer composite microparts made by microstereolithography , 2001, Symposium on Design, Test, Integration, and Packaging of MEMS/MOEMS.
[53] A. Mikos,et al. Synthesis of biodegradable poly(propylene fumarate) networks with poly(propylene fumarate)–diacrylate macromers as crosslinking agents and characterization of their degradation products , 2001 .
[54] David Dean,et al. Synthesis and properties of photocross-linked poly(propylene fumarate) scaffolds , 2001, Journal of biomaterials science. Polymer edition.
[55] P. D'urso,et al. Custom cranioplasty using stereolithography and acrylic. , 2000, British journal of plastic surgery.
[56] Manabu Mizutani,et al. Molecular Design of Photocurable Liquid Biodegradable Copolymers. 2. Synthesis of Coumarin-Derivatized Oligo(methacrylate)s and Photocuring , 2000 .
[57] Manabu Mizutani,et al. Molecular Design of Photocurable Liquid Biodegradable Copolymers. 1. Synthesis and Photocuring Characteristics , 2000 .
[58] S J Bryant,et al. Cytocompatibility of UV and visible light photoinitiating systems on cultured NIH/3T3 fibroblasts in vitro , 2000, Journal of biomaterials science. Polymer edition.
[59] H. Baumgartner,et al. Stereolithographic biomodeling to create tangible hard copies of cardiac structures from echocardiographic data: in vitro and in vivo validation. , 2000, Journal of the American College of Cardiology.
[60] Kristi S. Anseth,et al. MALDI-TOF Characterization of Highly Cross-Linked, Degradable Polymer Networks , 1999 .
[61] Mark W. Grinstaff,et al. SYNTHESIS OF A NOVEL POLYSACCHARIDE HYDROGEL , 1999 .
[62] Duc Truong Pham,et al. A comparison of rapid prototyping technologies , 1998 .
[63] Thierry Chartier,et al. Ceramic suspensions suitable for stereolithography , 1998 .
[64] M. Sefton,et al. Tissue engineering. , 1998, Journal of cutaneous medicine and surgery.
[65] J Beumer,et al. Surgical planning using three-dimensional imaging and computer modeling. , 1994, Otolaryngologic clinics of North America.
[66] Y. Ikada,et al. Distribution and tissue uptake of poly(ethylene glycol) with different molecular weights after intravenous administration to mice. , 1994, Journal of pharmaceutical sciences.
[67] J. Vacanti,et al. Tissue engineering : Frontiers in biotechnology , 1993 .
[68] Paul F. Jacobs,et al. Rapid Prototyping & Manufacturing: Fundamentals of Stereolithography , 1992 .