Reconfigurable manufacturing systems and their enabling technologies

A reconfigurable manufacturing system (RMS) is designed for rapid adjustment of production capacity and functionality in response to new market conditions and new process technology. It has several distinct characteristics including modularity, integrability, customisation, convertibility and diagnosability. There are a number of key interrelated technologies that should be developed and implemented to achieve these characteristics. This paper examines and identifies these technologies. After a brief description of the RMSs and their goals, aspects of reconfiguration (reconfigurable system, software, controller, machine, and process) are explained; this provides one with a better understanding of the enabling technologies of RMSs. Some of the issues related to the technology requirements of RMSs at the system and machine design levels, and ramp -up time reduction are then explained. The paper concludes with descriptions of some of the future research directions for RMSs.

[1]  Philip M. Wolfe,et al.  Computer integrated design and manufacturing , 1991 .

[2]  Leonardo Bottaci,et al.  Modular production systems: a new manufacturing paradigm , 1997, J. Intell. Manuf..

[3]  Jun Ni,et al.  An On-Line Measurement Technique for Machine Volumetric Error Compensation , 1993 .

[4]  Jay Lee.  Overview and perspectives on Japanese manufacturing strategies and production practices in machinery industry , 1997 .

[5]  Gun Ho Lee,et al.  Reconfigurability consideration design of components and manufacturing systems , 1997 .

[6]  Jeffrey L. Stein,et al.  CURRENT MONITORING OF FIELD CONTROLLED dc SPINDLE DRIVES. , 1986 .

[7]  R. Jaikumar.  200 years to CIM , 1993, IEEE Spectrum.

[8]  Jack Hollingum.  Implementing an Information Strategy in Manufacture , 1987 .

[9]  Tohru Watanabe.  A Model-Based Approach to Adaptive Control Optimization in Milling , 1986 .

[10]  S. Li,et al.  Tool Condition Monitoring in Machining by Fuzzy Neural Networks , 1996 .

[11]  David Alan Bourne,et al.  Manufacturing intelligence , 1988 .

[12]  Lei Zhou,et al.  Performance evaluation of modular real-time controllers , 1996 .

[13]  Yusuf Altintas,et al.  A Hierarchical Open-Architecture CNC System for Machine Tools , 1994 .

[14]  Lawrence M. Seiford,et al.  Transient behaviour of finite capacity tandem queues with blocking , 1991 .

[15]  Nageswara Rao Posinasetti,et al.  Machine Design , 1907, Nature.

[16]  Chelsea C. White,et al.  A penalty function approach to alternative pairwise comparisons in ISMAUT , 1993, IEEE Trans. Syst. Man Cybern..

[17]  A. Galip Ulsoy,et al.  Real-Time Open Control Architectures and System Performance , 1996 .

[18]  S. B. Rao,et al.  Tool Wear Monitoring Through the Dynamics of Stable Turning , 1986 .

[19]  Pradeep K. Khosla,et al.  Design of Dynamically Reconfigurable Real-Time Software Using Port-Based Objects , 1997, IEEE Trans. Software Eng..

[20]  Yoram Koren,et al.  Variable-Gain Cross-Coupling Controller for Contouring , 1991 .

[21]  Jay Lee.  Overview and perspectives on Japanese manufacturing strategies and production practices in machinery industry , 1997 .

[22]  A. Galip Ulsoy,et al.  DYNAMIC STATE MODEL FOR ON-LINE TOOL WEAR ESTIMATION IN TURNING. , 1987 .

[23]  Eugene Rivin,et al.  Enhancement of dynamic stability of cantilever tooling structures , 1992 .

[24]  Hyunbo Cho,et al.  A Formal Approach to Integrating Computer-Aided Process Planning and Shop Floor Control , 1994 .

[25]  Yoram Koren,et al.  Stream-of-Variation Theory for Automotive Body Assembly , 1997 .

[26]  John L. Michaloski,et al.  Enhanced Machine Controller Architecture Overview | NIST , 1993 .

[27]  Neil A. Duffie,et al.  Distributed Computing Systems for Multiple-Processor Industrial Control , 1980 .

[28]  Jay Lee.  Apply force/torque sensors to robotic applications , 1987, Robotics.

[29]  Elijah Kannatey-Asibu.  ANALYSIS OF THE GMAW PROCESS FOR MICROPROCESSOR CONTROL OF ARC LENGTH. , 1985 .

[30]  L. Daneshmend,et al.  Model Reference Adaptive Control of Feed Force in Turning , 1986 .

[31]  A. Galip Ulsoy,et al.  Principal Developments in the Adaptive Control of Machine Tools , 1983 .

[32]  Mohsen M. D. Hassan,et al.  Machine layout problem in modern manufacturing facilities , 1994 .

[33]  Thomas Hughes.  Programmable Controllers , 1997 .

[34]  A. Galip Ulsoy,et al.  Reconfigurable manufacturing systems: Key to future manufacturing , 2000, J. Intell. Manuf..

[35]  Yusuf Altintas,et al.  Modular CNC Design for Intelligent Machining, Part 1: Design of a Hierarchical Motion Control Module for CNC Machine Tools , 1996 .

[36]  I. Yellowley,et al.  The Control of Multiple Constraints Within an Open Architecture Machine Tool Controller , 1996 .

[37]  David Dornfeld,et al.  Sensor Integration Using Neural Networks for Intelligent Tool Condition Monitoring , 1990 .

[38]  Kang G. Shin,et al.  An Open Architecture Real-Time Controller for Machining Processes , 1995 .

[39]  C. Richard Liu,et al.  An analytical quadratic model for the geometric error of a machine tool , 1986 .

[40]  Olivier Garro,et al.  Towards new architectures of machine tools , 1993 .

[41]  A.G. Ulsoy,et al.  Applications of adaptive control to machine tool process control , 1989, IEEE Control Systems Magazine.

[42]  Paul K. Wright,et al.  On-Line Estimation of Tool/Chip Interface Temperatures for a Turning Operation , 1988 .

[43]  Brian Adams.  How to Succeed , 1985 .

[44]  David M. Dilts,et al.  The evolution of control architectures for automated manufacturing systems , 1991 .

[45]  Neil A. Duffie,et al.  Real-time distributed scheduling of heterarchical manufacturing systems , 1994 .

[46]  D. Dornfeld,et al.  In-Process Tool Fracture Detection , 1984 .

[47]  Georgia-Ann Klutke,et al.  The backlog process in queues with random service speed , 1996, Int. J. Syst. Sci..

[48]  R. J. Furness,et al.  Supervisory Control of Drilling , 1993, 1993 American Control Conference.

[49]  George Chryssolouris,et al.  An Experimental Study of Strategies for Integrating Sensor Information in Machining , 1989 .

[50]  Eugene Rivin,et al.  Vibration isolation of precision equipment , 1995 .

[51]  Yusuf Altintas,et al.  Modular CNC Design for Intelligent Machining, Part 2: Modular Integration of Sensor Based Milling Process Monitoring and Control Tasks , 1996 .

[52]  Juha Kuusela,et al.  Object-oriented technology for real-time systems , 1996 .

[53]  James S. Albus,et al.  Open architecture controllers , 1997 .

[54]  Hagbae Kim,et al.  Derivation and application of hard deadlines for real-time control systems , 1992, IEEE Trans. Syst. Man Cybern..