A mechanistic approach to the prediction of creep-dominated failure during simultaneous creep-fatigue

[1]  E. G. Ellison,et al.  A combined deformation map-ductility exhaustion approach to creep-fatigue analysis , 1981 .

[2]  T. Langdon,et al.  A cavity growth diagram for high temperature creep , 1980 .

[3]  G. J. Lloyd,et al.  Stable and Unstable Fatigue Crack Propagation During High Temperature Creep-Fatigue in Austenitic Steels: The Role of Precipitation , 1979 .

[4]  J. E. Harris,et al.  Influence of intergranular precipitates on diffusional growth of creep voids , 1979 .

[5]  R. Raj,et al.  Hold-time effects in high temperature fatigue , 1978 .

[6]  David A. Miller,et al.  The effect of temperature and carbon content on the cavitation behavior of a 1.5 pct Cr-0.5 pct V steel , 1978 .

[7]  B. Tomkins,et al.  Elevated-temperature fatigue interactions in engineering materials , 1977 .

[8]  J. Wareing.  Creep-fatigue interaction in austenitic stainless steels , 1977 .

[9]  J. Hancock.  Creep cavitation without a vacancy flux , 1976 .

[10]  H. Müllner,et al.  Amplitude dependence of the internal friction in copper after annealing at low oxygen pressure , 1976 .

[11]  M. Speight.  Mass transfer and grain-boundary sliding in diffusion creep , 1975 .

[12]  C. Brinkman,et al.  Estimates of Creep-Fatigue Interaction in Irradiated and Unirradiated Austenitic Stainless Steels , 1972 .

[13]  R. Reed,et al.  Characterization of the strain rate dependence of the shear stress for niobium single crystals , 1967 .

[14]  D. J. White,et al.  Observations of the Effect of Creep Relaxation on High-Strain Fatigue: , 1966 .

[15]  J. Gittus.  Implications of some data on relaxation creep in nimonic 80a , 1964 .

[16]  D. S. Wood,et al.  SOME CREEP/FATIGUE PROPERTIES OF TYPE 316 STEEL AT 625°C , 1980 .

[17]  B. F. Dyson,et al.  Constrained Cavity Growth, Its Use in Quantifying Recent Creep Fracture Results , 1979 .

[18]  J. Gastaldi,et al.  Kinematic study by X-ray synchrotron topograph of misfit recrystallization Dislocations formation in aluminium single crystals during recrystallization , 1979 .

[19]  B. Cane.  Creep-fracture initiation in 2¼%Cr-1%Mo steel , 1976 .

[20]  M. V. Speight,et al.  Vacancy Potential and Void Growth on Grain Boundaries , 1975 .

[21]  S. Manson.  The Challenge to Unify Treatment of High Temperature Fatigue—A Partisan Proposal Based on Strainrange Partitioning , 1972 .