Numerical investigations on high-power laser cutting of metals

A theoretical approach based on a numerical simulation using experimental data is proposed as a contribution for the study of laser metal cutting under gas assistance. The aim is to simulate the stages of the kerf formation by considering the induced generated melt film dynamics, while it interacts with the laser beam and the assisting gas jet. For normal atmospheric conditions, a 3D model is developed using the finite volume method to solve the governing hydrodynamic equations, supplied with the species conservation equation. The present air, the metallic liquid, and the solid metal are considered as phases, where the interface positions are tracked by implementation of the volume-of-fluid method through Fluent CFD code, whereas an enthalpic method is used to take into account the material melting and resolidification. The results for six operating conditions in relation to the cutting velocity show an interesting agreement with the experimental observations.

[1]  W. Sutherland.  LII. The viscosity of gases and molecular force , 1893 .

[2]  R. C. Weast.  CRC Handbook of Chemistry and Physics , 1973 .

[3]  W. Duley.  Co2 Lasers: Effects and Applications , 1976 .

[4]  K. Kendall.  Strengthening of adhesive joints by dislocations , 1977 .

[5]  C. W. Hirt,et al.  Volume of fluid (VOF) method for the dynamics of free boundaries , 1981 .

[6]  D. Schuöcker.  Dynamic phenomena in laser cutting and cut quality , 1986 .

[7]  A. Gomersall.  Industrial Applications of Lasers , 1986 .

[8]  Dieter Schuocker,et al.  Dynamic Effects In Laser Cutting And Formation Of Periodic Striations , 1987, Other Conferences.

[9]  M. Vičánek,et al.  Momentum and heat transfer of an inert gas jet to the melt in laser cutting , 1987 .

[10]  H. Urbassek,et al.  Hydrodynamical instability of melt flow in laser cutting , 1987 .

[11]  H. Urbassek,et al.  On laser fusion cutting of metals , 1987 .

[12]  M. Cross,et al.  An enthalpy method for convection/diffusion phase change , 1987 .

[13]  E. Beyer,et al.  Absorption Distribution On Idealized Cutting Front Geometries And Its Significance For Laser Beam Cutting , 1989, Other Conferences.

[14]  J. Brackbill,et al.  A continuum method for modeling surface tension , 1992 .

[15]  N. K. Makashev,et al.  Gas hydrodynamics of metal cutting by cw laser radiation in a rare gas , 1992 .

[16]  O. G. Buzykin,et al.  Gas hydrodynamics of CW laser cutting of metals in inert gas , 1994, Other Conferences.

[17]  A. Kaplan.  An analytical model of metal cutting with a laser beam , 1996 .

[18]  B. Yilbas.  A study into CO2 laser cutting process , 1997 .

[19]  G. Tani,et al.  Prediction of melt geometry in laser cutting , 2003 .

[20]  V. Fomin,et al.  LASER APPLICATIONS AND OTHER TOPICS IN QUANTUM ELECTRONICS: Numerical analysis of the effect of the TEM00 radiation mode polarisation on the cut shape in laser cutting of thick metal sheets , 2005 .

[21]  B. Yilbas,et al.  Dross formation during laser cutting process , 2006 .

[22]  N. Dahotre,et al.  Laser Fabrication and Machining of Materials , 2007 .

[23]  Lin Li,et al.  A statistical analysis of striation formation during laser cutting of ceramics , 2008 .

[24]  Michael Schmidt,et al.  Towards a universal numerical simulation model for laser material processing , 2010 .

[25]  R. Fabbro,et al.  Experimental investigation of hydrodynamics of melt layer during laser cutting of steel , 2011 .

[26]  J. Ciurana,et al.  Dross formation and process parameters analysis of fibre laser cutting of stainless steel thin sheets , 2014 .