Development of a SnS Film Process for Energy Device Applications

Tin monosulfide (SnS) is a promising p-type semiconductor material for energy devices. To realize the device application of SnS, studies on process improvement and film characteristics of SnS is needed. Thus, we developed a new film process using atomic layer deposition (ALD) to produce SnS films with high quality and various film characteristics. First, a process for obtaining a thick SnS film was studied. An amorphous SnS2 (a-SnS2) film with a high growth rate was deposited by ALD, and a thick SnS film was obtained using phase transition of a-SnS2 film by vacuum annealing. Subsequently, we investigated the effect of seed layer on formation of SnS film to verify the applicability of SnS to various devices. Separately deposited crystalline SnS and SnS2 thin films were used as seed layer. The SnS film with a SnS seed showed small grain size and high film density from the low surface energy of the SnS seed. In the case of the SnS film using a SnS2 seed, volume expansion occurred by vertically grown SnS grains due to a lattice mismatch with the SnS2 seed. The obtained SnS film using the SnS2 seed exhibited a large reactive site suitable for ion exchange.

[1]  X. Lou,et al.  Two-dimensional nanosheets for photoelectrochemical water splitting: Possibilities and opportunities , 2013 .

[2]  Ivan P. Parkin,et al.  Atmospheric Pressure Chemical Vapor Deposition of Tin Sulfides (SnS, Sn2S3, and SnS2) on Glass , 1999 .

[3]  Aron Walsh,et al.  Electronic Structure and Defect Physics of Tin Sulfides: SnS, Sn 2 S 3 , and Sn S 2 , 2016 .

[4]  Dong‐Wan Kim,et al.  Superior rate capabilities of SnS nanosheet electrodes for Li ion batteries , 2010 .

[5]  Shun-Li Shang,et al.  Thermodynamics of the S–Sn system: Implication for synthesis of earth abundant photovoltaic absorber materials , 2016 .

[6]  Yeonwoong Jung,et al.  Metal seed layer thickness-induced transition from vertical to horizontal growth of MoS2 and WS2. , 2014, Nano letters.

[7]  C. Jeon,et al.  Control of the microstructure of SnS photovoltaic absorber using a seed layer and its impact on the solar cell performance , 2017 .

[8]  Sagar Mitra,et al.  Excellent electrochemical performance of tin monosulphide (SnS) as a sodium-ion battery anode , 2014 .

[9]  Mark Oksman,et al.  Growth Mechanisms and Electronic Properties of Vertically Aligned MoS2 , 2018, Scientific Reports.

[10]  Meng Cao,et al.  Thickness tunable SnS nanosheets for photoelectrochemical water splitting , 2016 .

[11]  Cheol Seong Hwang,et al.  Synthesis of SnS Thin Films by Atomic Layer Deposition at Low Temperatures , 2017 .

[12]  Steven M. George,et al.  Tin Monosulfide Thin Films Grown by Atomic Layer Deposition Using Tin 2,4-Pentanedionate and Hydrogen Sulfide , 2010 .

[13]  Jeongsu Lee,et al.  Fabrication of high crystalline SnS and SnS2 thin films, and their switching device characteristics , 2018, Nanotechnology.

[14]  Mutsumi Sugiyama,et al.  Sulfurization Growth of SnS Films and Fabrication of CdS/SnS Heterojunction for Solar Cells , 2008 .

[15]  Tonio Buonassisi,et al.  Co‐optimization of SnS absorber and Zn(O,S) buffer materials for improved solar cells , 2015 .

[16]  Marika Edoff,et al.  Atomic Layer Deposition of Cubic and Orthorhombic Phase Tin Monosulfide , 2017 .

[17]  Nadir Bouarissa,et al.  The role of back surface field SnS layer in improvement of efficiency of CdTe thin film solar cells , 2016 .

[18]  Aron Walsh,et al.  Electronic and optical properties of single crystal SnS2: an earth-abundant disulfide photocatalyst , 2016, Journal of Materials Chemistry A.

[19]  Tonio Buonassisi,et al.  3.88% Efficient Tin Sulfide Solar Cells using Congruent Thermal Evaporation , 2014, Advanced materials.

[20]  M. J. Powell,et al.  The effect of pressure on the optical properties of 2H and 4H SnS2 , 1977 .

[21]  Roy G. Gordon,et al.  Atomic Layer Deposition of Tin Monosulfide Thin Films , 2011 .

[22]  Tonio Buonassisi,et al.  A Two-Step Absorber Deposition Approach To Overcome Shunt Losses in Thin-Film Solar Cells: Using Tin Sulfide as a Proof-of-Concept Material System. , 2016, ACS applied materials & interfaces.

[23]  Aron Walsh,et al.  Phase stability of the earth-abundant tin sulfides SnS, SnS2, and Sn2S3 , 2012 .

[24]  Efthimios Kaxiras,et al.  First principles study of point defects in SnS. , 2014, Physical chemistry chemical physics : PCCP.

[25]  M. M. El-Nahass,et al.  Optical properties of thermally evaporated SnS thin films , 2002 .

[26]  Rui He,et al.  Screening limited switching performance of multilayer 2D semiconductor FETs: the case for SnS. , 2016, Nanoscale.

[27]  E. Romero,et al.  Optical and Structural Studies on SnS Films Grown by Co-Evaporation , 2006 .

[28]  Robert Miles,et al.  Photovoltaic properties of SnS based solar cells , 2006 .

[29]  Baoling Huang,et al.  First-principles study of anisotropic thermoelectric transport properties of IV-VI semiconductor compounds SnSe and SnS , 2015 .

[30]  Tonio Buonassisi,et al.  Improving the Carrier Lifetime of Tin Sulfide via Prediction and Mitigation of Harmful Point Defects. , 2017, The journal of physical chemistry letters.

[31]  Sang Woon Lee,et al.  Overcoming Efficiency Limitations of SnS‐Based Solar Cells , 2014 .

[32]  Aron Walsh,et al.  Synthesis, Characterization, and Electronic Structure of Single-Crystal SnS, Sn2S3, and SnS2 , 2013 .

[33]  H. J. Vink,et al.  Investigations on SnS , 1961 .

[34]  John Kalomiros,et al.  Optical investigation of SnS2 single crystals , 1996 .

[35]  B Thangaraju,et al.  Spray pyrolytic deposition and characterization of SnS and SnS2 thin films , 2000 .

[36]  Hyungtak Seo,et al.  Tuning the electronic structure of tin sulfides grown by atomic layer deposition. , 2013, ACS applied materials & interfaces.

[37]  K. Nahm,et al.  Synthesis and electrochemical properties of SnS as possible anode material for lithium batteries , 2012 .