论文信息 - An exact model reduction procedure for mechanical systems

An exact model reduction procedure for mechanical systems

Abstract This paper gives details of an exact model reduction procedure for the dynamic analysis of general mechanical systems. In this procedure, the system is first transformed into an equivalent one-dimensional (ID) lumped mass-spring-damping system by coordinate transformations. The 1D lumped system is further reduced into a lower order model with arbitrarily selected degrees of freedom. Three numerical examples are given for a distributed lumped mass-spring system, a truss frame structure and a cantilever plate.

Michel Géradin | S. L. Chen

[1] F. W. Williams,et al. A GENERAL ALGORITHM FOR COMPUTING NATURAL FREQUENCIES OF ELASTIC STRUCTURES , 1971 .

[2] M. Géradin,et al. Exact and Direct Modeling Technique for Rotor-Bearing Systems with Arbitrary Selected Degrees-of-Freedom , 1994 .

[3] Yee-Tak Leung,et al. An accurate method of dynamic substructuring with simplified computation , 1979 .

[4] M. Geradin,et al. An exact model reduction technique for beam structures : combination of transfer and dynamic stiffness matrices , 1995 .

[5] M. Géradin,et al. Mechanical Vibrations: Theory and Application to Structural Dynamics , 1994 .

[6] Srinivasan Gopalakrishnan,et al. Spectral super-elements for wave propagation in structures with local non-uniformities , 1995 .

[7] R. Guyan. Reduction of stiffness and mass matrices , 1965 .

[8] B. Irons,et al. Inadequacy of nodal connections in a stiffness solution for plate bending , 1965 .

[9] A. Leung. An accurate method of dynamic condensation in structural analysis , 1978 .

[10] A. Simpson. On the solution of S(ω)x=0 by a Newtonian procedure , 1984 .

[11] T. H. Richards,et al. An accurate method in structural vibration analysis , 1977 .

[12] S. Falk,et al. Die Abbildung eines allgemeinen Schwingungssystems auf eine einfache Schwingerkette , 1955 .

[13] B. Downs. Accurate Reduction of Stiffness and Mass Matrices for Vibration Analysis and a Rationale for Selecting Master Degrees of Freedom , 1980 .