Axial Load Capacity of Concrete-Filled FRP Tube Columns: Experimental versus Theoretical Predictions
暂无分享,去创建一个
[1] Inge Lyse,et al. FOURTH PROGRESS REPORT ON COLUMN TESTS AT LEHIGH UNIVERSITY , 1932 .
[2] A. Mirmiran,et al. Effect of Column Parameters on FRP-Confined Concrete , 1998 .
[3] Amir Mirmiran,et al. Model of Concrete Confined by Fiber Composites , 1998 .
[4] B. Benmokrane,et al. Flexural Behavior of Concrete Beams Reinforced with Deformed Fiber Reinforced Plastic Reinforcing Rods , 1998 .
[5] H. Toutanji,et al. BEHAVIOR OF CONCRETE COLUMNS CONFINED WITH FIBER REINFORCED POLYMER TUBES , 1999 .
[6] K W Neale,et al. Confinement of reinforced concrete columns with fibre-reinforced composite sheets — an experimental study , 1999 .
[7] Michèle Thériault,et al. Design equations for axially loaded reinforced concrete columns strengthened with fibre reinforced polymer wraps , 2000 .
[8] Frieder Seible,et al. Structural Characterization of Fiber-Reinforced Composite Short- and Medium-Span Bridge Systems , 2000 .
[9] Sami H. Rizkalla,et al. Behavior of Axially Loaded Concrete-Filled Circular Fiber-Reinforced Polymer Tubes , 2001 .
[10] Richard Sause,et al. Axial Behavior of Reinforced Concrete Columns Confined with FRP Jackets , 2001 .
[11] Syed Ali Debaj Jaffry. Concrete filled glass fibre reinforced polymer (GFRP) shells under concentric compression , 2001 .
[12] Amir Mirmiran,et al. BUCKLING ANALYSIS OF CONCRETE-FILLED FRP TUBES , 2001 .
[13] Sami H. Rizkalla,et al. Confinement Model for Axially Loaded Concrete Confined by Circular Fiber-Reinforced Polymer Tubes , 2001 .
[14] Stephanie L. Walkup,et al. Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures (ACI 440.2R-02) , 2005 .
[15] J. Teng,et al. Design-oriented stress–strain model for FRP-confined concrete , 2003 .
[16] Jin-Guang Teng,et al. ULTIMATE CONDITION OF FIBER REINFORCED POLYMER-CONFINED CONCRETE , 2004 .
[17] V. Karbhari. Fiber reinforced composite bridge systems––transition from the laboratory to the field , 2004 .
[18] Togay Ozbakkaloglu,et al. Rectangular Stress Block for High-Strength Concrete , 2004 .
[19] Mark F. Green,et al. COMPARISON OF CONFINEMENT MODELS FOR FIBER-REINFORCED POLYMER-WRAPPED CONCRETE , 2005 .
[20] Amir Mirmiran,et al. Effect of Column Parameters on Axial Compression Behavior of Concrete-Filled FRP Tubes , 2005 .
[21] Joe Wong,et al. Analysis method for the design of reinforced concrete bridge barrier and cantilever deck under railing loads as specified in CAN/CSA-S6-00 (Canadian highway bridge design code) , 2005 .
[22] Kent A. Harries,et al. Axial Behavior and Modeling of Confined Small-, Medium-, and Large-Scale Circular Sections with Carbon Fiber-Reinforced Polymer Jackets , 2005 .
[23] Zhishen Wu,et al. Strength and ductility of concrete cylinders confined with FRP composites , 2006 .
[24] Omar Chaallal,et al. Circular Columns Confined with FRP: Experimental versus Predictions of Models and Guidelines , 2006 .
[25] Brahim Benmokrane,et al. Designing and Testing of Concrete Bridge Decks Reinforced with Glass FRP Bars , 2006 .
[26] Sungjoong Kim,et al. Behavior of High-Strength Concrete Columns , 2007 .
[27] Shamim A. Sheikh,et al. Investigation of glass-fibre-reinforced-polymer shells as formwork and reinforcement for concrete columns , 2007 .
[28] Je-Kuk Son,et al. Finite element modeling of hollow and concrete-filled fiber composite tubes in flexure: Model development, verification and investigation of tube parameters , 2008 .
[29] Antonio Nanni,et al. Review of Design Guidelines for FRP Confinement of Reinforced Concrete Columns of Noncircular Cross Sections , 2008 .