论文信息 - Performance of a 1 MV A high temperature superconductors-enabled saturable magnetic core-type fault current limiter

Performance of a 1 MV A high temperature superconductors-enabled saturable magnetic core-type fault current limiter

A 1 MV A single-phase DC saturated iron core-type fault current limiter (FCL) employing DC coils manufactured from Bi-2223/Ag high temperature superconductor has been designed, constructed, and tested. The device, configured to respond to a fault occurring on either the positive or negative wave cycle, exhibited instantaneous reaction and reset times. It could clip a continuous applied steady state fault current of 1200 A, and limited a transient peak fault current of 2200 A to the specified current of 100 A. The operation of the device did not produce any significant harmonic contribution from the clipping action, as under fault conditions, 99.96% of the harmonic power spectrum of the clipped waveform contributed to the fundamental, and the non-fault inductance of the FCL was <0.01 mH.

[1] Joachim Bock,et al. Development and successful testing of MCP BSCCO-2212 components for a 10 MVA resistive superconducting fault current limiter , 2004 .

[2] P. Haldar,et al. Design and development of a 15 kV, 20 kA HTS fault current limiter , 2000, IEEE Transactions on Applied Superconductivity.

[3] Takeshi Ohkuma,et al. Design and test results of 6.6 kV high-Tc superconducting fault current limiter , 2001 .

[4] C. Wang,et al. Modified orifice pulse tube refrigerator without a reservoir , 1994 .

[5] Jakob Rhyner,et al. Test of 1.2 MVA high- superconducting fault current limiter , 1997 .

[6] C. Grantham,et al. Electrical application of high T/sub c/ superconducting saturable magnetic core fault current limiter , 1997, IEEE Transactions on Applied Superconductivity.