Green ceramic machining: A top-down approach for the rapid fabrication of complex-shaped ceramics

Abstract Green ceramic machining (GCM) has been investigated as an alternative method for the mould-free fabrication of complex-shaped ceramics, where ceramics in ‘unsintered’ green state are machined to complex-shaped via CAD/CAM technology. Recent advancement of CNC machining technology makes GCM a potential alternative for the rapid fabrication of ceramics, especially for some one-of-a-kind products. In this work, we investigated two processing routes to make ceramic green bodies which were suitable for green machining. The effects of processing methods on the green ceramic strength and toughness, machinability and surface finishing of the final ceramics were discussed. Examples of applications of the GCM in the fabrication of ceramic lattice scaffolds for bone tissue engineering and dental restorations have been demonstrated. The results show that gelformed ceramics have better mechanical properties and machinability than protein coagulation cast ceramics. But the debinding for gelformed thick wall components was found more difficult. It is therefore more suitable for the fabrication of ceramic microcomponent or thin sheet structures such as ceramic lattice scaffolds. Protein coagulation cast ceramics have good machinability and surface finishing for thick wall ceramic components. However, inhomogeneous and anisotropic shrinkage of complex-shaped ceramics were observed during sintering stage. Possible causes and solutions have been discussed.

[1]  L. Gauckler,et al.  Net‐shaping of ceramic components by direct ceramic machining , 2003 .

[2]  J. Halloran,et al.  Freeform fabrication of ceramics , 1999 .

[3]  F. Grellner,et al.  Evaluation of subsurface damage in CAD/CAM machined dental ceramics , 1998, Journal of materials science. Materials in medicine.

[4]  Bo Su,et al.  Micropatterning of fine scale ceramic structures , 2002 .

[5]  B. Su,et al.  A comparative study of viscous polymer processed ceramics based on aqueous and non-aqueous binder systems , 2009 .

[6]  H Spiekermann,et al.  Status of current CAD/CAM technology in dental medicine. , 2004, International journal of computerized dentistry.

[7]  S. D. Nunn,et al.  Green Machining of Gelcast Ceramic Materlals , 2008 .

[8]  John W. Halloran,et al.  Stereolithography of ceramic suspensions , 1997 .

[9]  James D. Cawley,et al.  Solid freeform fabrication of ceramics , 1999 .

[10]  M. Wagner,et al.  Effect of Friction on Inhomogeneous Shrinkage Behavior of Structured LTCC Tapes , 2006 .

[11]  J. Cesarano,et al.  Directed colloidal assembly of 3D periodic structures , 2002 .

[12]  N. Antón,et al.  Statistical approach to mechanical behaviour of ceramic matrix composites based on Portland clinker , 2001 .

[13]  Peter Greil,et al.  Lifetime prediction of CAD/CAM dental ceramics. , 2002, Journal of biomedical materials research.

[14]  Brian R. Stoner,et al.  Ceramics for restorative dentistry: Critical aspects for fracture and fatigue resistance , 2007 .

[15]  J. Cesarano,et al.  Direct Ink Writing of Three‐Dimensional Ceramic Structures , 2006 .

[16]  Mohsen A. Jafari,et al.  Processing of advanced electroceramic components by fused deposition technique , 2001 .

[17]  R. Giordano.  Materials for chairside CAD/CAM-produced restorations. , 2006, Journal of the American Dental Association.

[18]  V. Thompson,et al.  Near-surface damage - a persistent problem in crowns obtained by computer-aided design and manufacturing , 2005, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[19]  Bo Su,et al.  Routes to net shape electroceramic devices and thick films , 2001 .

[20]  Michael Wolfe,et al.  J+ = J , 1994, ACM SIGPLAN Notices.

[21]  E. D. Rekow,et al.  Computer-aided design and fabrication of dental restorations: current systems and future possibilities. , 2006, Journal of the American Dental Association.

[22]  Heike Rudolph,et al.  CAD/CAM-machining effects on Y-TZP zirconia. , 2004, Dental materials : official publication of the Academy of Dental Materials.

[23]  John Evans,et al.  Direct ink-jet printing of vertical walls , 2002 .

[24]  V. Hennige,et al.  Shrinkage-free ZrSiO4-ceramics: Characterisation and Applications , 1999 .

[25]  Emanuel M. Sachs,et al.  Ink-jet printing of binders for ceramic components , 2004 .

[26]  S. Dhara,et al.  Green Machining to Net Shape Alumina Ceramics Prepared Using Different Processing Routes , 2005 .

[27]  B. Su,et al.  Embossing of 3D ceramic microstructures , 2002 .

[28]  Li Yang,et al.  Fabrication of three-dimensional inter-connective porous ceramics via ceramic green machining and bonding , 2008 .

[29]  M. Frank,et al.  A comparison of the microstructure and properties of the IPS Empress 2 and the IPS Empress glass-ceramics. , 2000, Journal of biomedical materials research.