A circuit to model the electrical behavior of an ionic polymer-metal composite

The electrical behavior of an ionic polymer-metal composite (IPMC), when a voltage is applied across its thickness, is investigated. IPMCs are new materials of increasing interest, to implement artificial muscles in robotic applications, and to implement displacement sensors in measurement fields. They are particularly light and they deform if electrically stimulated with a very low voltage; on the other hand they produce a voltage if mechanically bent. An understanding of the phenomena involved in electromechanical energy conversion may address research activity toward the building of innovative devices where both sensing and actuating functions could be integrated in the same material. The paper illustrates a model that describes the electrical behavior of an IPMC as an actuator using an equivalent circuit. It is a totally new nonlinear lumped parameter model which is able to describe all the phenomena observed in the flow of electrical current through the material, including nonlinear phenomena. The model has been validated by a large set of comparisons between simulations and experimental data. In all the cases analyzed the simulations agree with the experimental data.

[1]  M. Shahinpoor,et al.  Ionic polymer-metal composites (IPMC) as biomimetic sensors and actuators , 1999 .

[2]  Donald J. Leo,et al.  Manufacture and characterization of ionic polymer transducers employing non-precious metal electrodes , 2003 .

[3]  Y. Bar-Cohen.  Electroactive Polymers as Artificial Muscles: Capabilities, Potentials and Challenges , 2000 .

[4]  Yoseph Bar-Cohen,et al.  Measurements and macro models of ionomeric polymer-metal composites (IPMC) , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[5]  Yoseph Bar-Cohen,et al.  Electroactive Polymer (EAP) Actuators as Artificial Muscles: Reality, Potential, and Challenges, Second Edition , 2004 .

[6]  Yoseph Bar-Cohen,et al.  Challenges to the Transition to the Practical Application of IPMC as Artificial-Muscle Actuators , 1999 .

[7]  Toshi Takamori,et al.  An actuator model of ICPF for robotic applications on the basis of physicochemical hypotheses , 2000, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065).

[8]  Yoseph Bar-Cohen,et al.  Electrical impedence of ionic polymeric metal composites , 1999, Smart Structures.

[9]  K. Oguro,et al.  CHALLENGES TO THE TRANSITION OF IPMC ARTIFICIAL MUSCLE ACTUATORS TO PRACTICAL APPLICATION , 1999 .

[10]  Mohsen Shahinpoor,et al.  Mathematical modeling of ionic interactions and deformation in ionic polymer-metal composite artificial muscles , 1998, Smart Structures.

[11]  T. Takamori,et al.  Linear approximate dynamic model of ICPF (ionic conducting polymer gel film) actuator , 1996, Proceedings of IEEE International Conference on Robotics and Automation.

[12]  Kwang J. Kim,et al.  An Equivalent Circuit Model for Ionic Polymer-Metal Composites and their Performance Improvement by a Clay-Based Polymer Nano-Composite Technique , 2003 .

[13]  Mohsen Shahinpoor.  Electromechanics of ionoelastic beams as electrically controllable artificial muscles , 1999, Smart Structures.

[14]  K. Kim,et al.  The effect of surface-electrode resistance on the performance of ionic polymer-metal composite (IPMC) artificial muscles , 2000 .

[15]  Toshi Takamori,et al.  A dynamic model of ICPF actuator considering ion-induced lateral strain for molluskan robotics , 2002, IEEE/RSJ International Conference on Intelligent Robots and Systems.

[16]  J. Nam,et al.  Investigations on actuation characteristics of IPMC artificial muscle actuator , 2003 .

[17]  S. Nemat-Nasser,et al.  Comparative experimental study of ionic polymer–metal composites with different backbone ionomers and in various cation forms , 2003 .

[18]  Luigi Fortuna,et al.  Electro-active polymers as CNN actuators for locomotion control , 2002, 2002 IEEE International Symposium on Circuits and Systems. Proceedings (Cat. No.02CH37353).