Optimization on conventional and electric air-cycle refrigeration systems of aircraft: A short-cut method and analysis

Abstract The air-cycle refrigeration system is widely used in commercial and military aircraft, and its efficiency greatly affects aircraft performance. Nowadays, this system requires a more efficient design and optimization method. In this paper, a short-cut optimization method with high efficiency and effectiveness is introduced for both conventional and electric air-cycle refrigeration systems. Based on the system characteristics, a four-layer parameter matching algorithm is designed which avoids computational difficulty caused by simultaneous equations. Fuel penalty is chosen as the objective function of optimization; design variables are reduced based on sensitivity analysis to improve optimization efficiency. The results show that the 3-variable optimization of the conventional air-cycle refrigeration system can obtain almost the same results as the traditional 6-variable optimization in that these two optimizations can both significantly reduce the fuel penalty. However, the computer running time of the 3-variable optimization is much shorter than that of the 6-variable optimization. The optimal fuel penalty of the electric air-cycle refrigeration system is lower than that of the conventional one. This study can provide reference for optimizing the air-cycle refrigeration system of aircraft.

[1]  Yong Huang,et al.  Multi-parameter decoupling and slope tracking control strategy of a large-scale high altitude environment simulation test cabin , 2014 .

[2]  Stephen P. Boyd,et al.  Convex Optimization , 2004, Algorithms and Theory of Computation Handbook.

[3]  Isabel Pérez-Grande,et al.  Optimization of a commercial aircraft environmental control system , 2002 .

[4]  R. T. Naayagi.  A review of more electric aircraft technology , 2013, 2013 International Conference on Energy Efficient Technologies for Sustainability.

[5]  Ibrahim Dincer,et al.  Comparative performance study of an integrated air-cycle refrigeration and power generation system , 2016 .

[6]  Adrian Bejan,et al.  Minimum power requirement for environmental control of aircraft , 2003 .

[7]  Hélio Aparecido Navarro,et al.  A new approach for thermal performance calculation of cross-flow heat exchangers , 2005 .

[8]  Kazuki Shibata,et al.  Aircraft Secondary Power System Integration into Conceptual Design and Its Application to More Electric System , 2014 .

[9]  Escola Politécnica,et al.  Exergy Analysis Applied to a Complete Flight Mission of a Commercial Aircraft , 2008 .

[10]  Yong Huang,et al.  An intelligent control method for a large multi-parameter environmental simulation cabin , 2013 .

[11]  Patrick Wheeler,et al.  An overview of the more electrical aircraft , 2013 .

[12]  Yongfeng Zhu,et al.  Experimental study on the performance of an aircraft environmental control system , 2009 .

[13]  J.A. Ortega,et al.  Moving towards a more electric aircraft , 2007, IEEE Aerospace and Electronic Systems Magazine.

[14]  Daniel Bender,et al.  Integration of exergy analysis into model-based design and evaluation of aircraft environmental control systems , 2017 .

[15]  Bulent Sarlioglu,et al.  More Electric Aircraft: Review, Challenges, and Opportunities for Commercial Transport Aircraft , 2015, IEEE Transactions on Transportation Electrification.

[16]  J. C. Helton,et al.  An Investigation of Uncertainty and Sensitivity Analysis Techniques for Computer Models , 1988 .

[17]  Michael R. von Spakovsky,et al.  INVENT: Mission-Integrated Optimization of a Tip-to-Tail High Performance Aircraft System , 2012 .

[18]  Zhang Zhenying,et al.  Thermodynamic analysis of the actual air cycle refrigeration system , 2011 .

[19]  Niccolo Giannetti,et al.  Thermodynamic analysis of regenerated air-cycle refrigeration in high and low pressure configuration , 2014 .