A 2.3-MW Medium-voltage, three-level wind energy inverter applying a unique bus structure and 4.5-kV Si/SiC hybrid isolated power modules

A high-efficiency, 2.3-MW, medium-voltage, three-level inverter utilizing 4.5-kV Si/SiC (silicon carbide) hybrid modules for wind energy applications is discussed. The inverter addresses recent trends in siting the inverter within the base of multimegawatt turbine towers. A simplified split, three-layer laminated bus structure that maintains low parasitic inductances is introduced along with a low-voltage, high-current test method for determining these inductances. Feed-thru bushings, edge fill methods, and other design features of the laminated bus structure provide voltage isolation that is consistent with the 10.4-kV module isolation levels. Inverter efficiency improvement is a result of the (essential) elimination of the reverse recovery charge present in 4.5-kV Si PIN diodes, which can produce a significant reduction in diode turn-off losses as well as insulated-gate bipolar transistor (IGBT) turn-on losses. The hybrid modules are supplied in industry-standard 140 mm × 130 mm and 190 mm × 130 mm packages to demonstrate direct module substitution into existing inverter designs. A focus on laminated bus/capacitor-bank/module subassembly level switching performance is presented.

[1]  Jih-Sheng Lai,et al.  Characterization of power electronics system interconnect parasitics using time domain reflectometry , 1998 .

[2]  David Grider,et al.  Performance of Hybrid 4.5 kV SiC JBS Freewheeling Diode and Si IGBT , 2012 .

[3]  Bin Wu,et al.  High-Power Converters and ac Drives: Wu/High-Power Converters and ac Drives , 2006 .

[4]  William J. Eccles.  Pragmatic Electrical Engineering: Systems and Instruments , 2011, Pragmatic Electrical Engineering: Systems and Instruments.

[5]  R. J. Nelson,et al.  Fault ride-through capabilities of siemens full-converter wind turbines , 2011, 2011 IEEE Power and Energy Society General Meeting.

[6]  A. Tenconi,et al.  Low stray inductance bus bar design and construction for good EMC performance in power electronic circuits , 2000 .

[7]  Hirofumi Akagi,et al.  A New Neutral-Point-Clamped PWM Inverter , 1981, IEEE Transactions on Industry Applications.

[8]  Xiangning He,et al.  Development of a compact 750KVA three-phase NPC three-level universal inverter module with specifically designed busbar , 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[9]  Clarence W. de Silva,et al.  Vibration and Shock Handbook , 2005 .

[10]  Keiji Wada,et al.  Design and analysis of a bus bar structure for a medium voltage inverter , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[11]  William L. Erdman,et al.  4500 volt Si/SiC hybrid module qualification for modern megawatt scale wind energy inverters , 2014, 2014 IEEE Workshop on Wide Bandgap Power Devices and Applications.

[12]  Bin Wu,et al.  High-Power Converters and AC Drives , 2006 .

[13]  Gerard Ledwich,et al.  Reduced layer planar busbar for voltage source inverters , 2002 .

[14]  S. Round,et al.  Development of a three-phase three-level inverter for an electric vehicle , 1999 .