Mechanical properties of surface-functionalized SWCNT/epoxy composites

Abstract Well-dispersed epoxy/single-walled carbon nanotube (epoxy/SWCNT) composites were prepared by oxidization and functionalization of the SWCNT surfaces using polyamidoamine generation-0 (PAMAM-0) dendrimer. For comparison purposes, neat epoxy, epoxy/PAMAM-0 and epoxy/pristine-SWCNTs were also prepared. The morphology and mechanical properties of the above composite systems were investigated and correlated with the surface characteristics of SWCNTs. It is found that surface functionalization can effectively improve the dispersion and adhesion of SWCNTs in epoxy. This leads to enhancement in mechanical properties of epoxy, but the improvement is not as significant as expected. It is also found that surface functionalization agent will have an undesirable effect on the physical and mechanical properties of epoxy/SWCNT composites. Issues regarding optimization of mechanical properties of epoxy/SWCNT composites are discussed.

[1]  A. Clearfield,et al.  Effect of nanoplatelet aspect ratio on mechanical properties of epoxy nanocomposites , 2007 .

[2]  Robert H. Hauge,et al.  Poly(vinyl alcohol)/SWNT Composite Film , 2003 .

[3]  A. Clearfield,et al.  Effect of nanoplatelet dispersion on mechanical behavior of polymer nanocomposites , 2007 .

[4]  T. Pinnavaia,et al.  Homostructured Mixed Inorganic−Organic Ion Clays: A New Approach to Epoxy Polymer−Exfoliated Clay Nanocomposites with a Reduced Organic Modifier Content , 2002 .

[5]  Meng-Kao Yeh,et al.  Mechanical behavior of phenolic-based composites reinforced with multi-walled carbon nanotubes , 2006 .

[6]  Angel Rubio,et al.  Single‐Walled Carbon Nanotube–Polymer Composites: Strength and Weakness , 2000 .

[7]  Peng Liu,et al.  Modifications of carbon nanotubes with polymers , 2005 .

[8]  T. Chou,et al.  Advances in the science and technology of carbon nanotubes and their composites: a review , 2001 .

[9]  Chuck Zhang,et al.  Effective amino-functionalization of carbon nanotubes for reinforcing epoxy polymer composites , 2006, Nanotechnology.

[10]  S. Sushanth Kumar,et al.  Polyacrylonitrile Single‐Walled Carbon Nanotube Composite Fibers , 2004 .

[11]  Donald W. Brenner,et al.  Mechanical and Electrical Properties of Nanotubes , 2002 .

[12]  A. Clearfield,et al.  Epoxy Nanocomposites Based on the Synthetic α-Zirconium Phosphate Layer Structure , 2004 .

[13]  M. Moniruzzaman,et al.  Polymer Nanocomposites Containing Carbon Nanotubes , 2006 .

[14]  Lawrence T. Drzal,et al.  Thermo-physical and impact properties of epoxy nanocomposites reinforced by single-wall carbon nanotubes , 2004 .

[15]  Eklund,et al.  Solution properties of single-walled carbon nanotubes , 1998, Science.

[16]  Ado Jorio,et al.  UNUSUAL PROPERTIES AND STRUCTURE OF CARBON NANOTUBES , 2004 .

[17]  Q. Gong,et al.  Single-wall carbon nanotube colloids in polar solvents , 2000 .

[18]  J. Hone,et al.  Thermal properties of carbon nanotubes and nanotube-based materials , 2002 .

[19]  M. Terrones.  Science and Technology of the Twenty-First Century: Synthesis, Properties, and Applications of Carbon Nanotubes , 2003 .

[20]  Paul Calvert,et al.  Nanotube composites: A recipe for strength , 1999, Nature.

[21]  M. Dresselhaus.  Carbon nanotubes , 1995 .

[22]  T. A. Taton,et al.  Micelle-encapsulated carbon nanotubes: a route to nanotube composites. , 2003, Journal of the American Chemical Society.

[23]  Oren Regev,et al.  Toolbox for Dispersing Carbon Nanotubes into Polymers To Get Conductive Nanocomposites , 2006 .

[24]  R. Smalley,et al.  Reversible water-solubilization of single-walled carbon nanotubes by polymer wrapping , 2001 .

[25]  Robert H. Hauge,et al.  Crystallization and orientation studies in polypropylene/single wall carbon nanotube composite , 2003 .

[26]  J. C. H. Affdl,et al.  The Halpin-Tsai Equations: A Review , 1976 .

[27]  J. Halpin.  Stiffness and Expansion Estimates for Oriented Short Fiber Composites , 1969 .

[28]  Enrique V. Barrera,et al.  Processing and Mechanical Properties of Fluorinated Single-Wall Carbon Nanotube−Polyethylene Composites , 2006 .

[29]  D. Gersappe.  Molecular mechanisms of failure in polymer nanocomposites. , 2002, Physical review letters.

[30]  Kenneth A. Smith,et al.  Gas-phase catalytic growth of single-walled carbon nanotubes from carbon monoxide , 1999 .

[31]  Werner J. Blau,et al.  High Performance Nanotube‐Reinforced Plastics: Understanding the Mechanism of Strength Increase , 2004 .

[32]  B. Min,et al.  Amphiphilic Block Copolymer Micelles: New Dispersant for Single Wall Carbon Nanotubes† , 2005 .

[33]  E. W. Meijer,et al.  About Dendrimers: Structure, Physical Properties, and Applications. , 1999, Chemical reviews.

[34]  R. Ruoff,et al.  Tensile loading of ropes of single wall carbon nanotubes and their mechanical properties , 2000, Physical review letters.

[35]  Yiu-Wing Mai,et al.  Dispersion and alignment of carbon nanotubes in polymer matrix: A review , 2005 .

[36]  Karen Lozano,et al.  Reinforcing Epoxy Polymer Composites Through Covalent Integration of Functionalized Nanotubes , 2004 .

[37]  Jun Liu,et al.  Surfactant-assisted processing of carbon nanotube/polymer composites , 2000 .

[38]  Jiang Zhu,et al.  Improving the Dispersion and Integration of Single-Walled Carbon Nanotubes in Epoxy Composites through Functionalization , 2003 .

[39]  H. L. Cox.  The elasticity and strength of paper and other fibrous materials , 1952 .

[40]  Susan B. Sinnott,et al.  Effect of chemical functionalization on the mechanical properties of carbon nanotubes , 1998 .

[41]  Young Hee Lee,et al.  Crystalline Ropes of Metallic Carbon Nanotubes , 1996, Science.

[42]  A. Clearfield,et al.  Morphology and mechanical behavior of exfoliated epoxy/α-zirconium phosphate nanocomposites , 2007 .

[43]  Wei Zhou,et al.  Nanotube Networks in Polymer Nanocomposites: Rheology and Electrical Conductivity , 2004 .

[44]  James Alastair McLaughlin,et al.  High resolution XPS characterization of chemical functionalised MWCNTs and SWCNTs , 2005 .