Al/SiC thermal spray coatings for corrosion protection of Mg–Al alloys in humid and saline environments

Abstract The corrosion behaviour of thermal spray Al/SiC coatings deposited on AZ31, AZ80 and AZ91D Mg–Al–Zn alloys was evaluated in neutral salt fog (ASTM B 117) and high relative humidity (98% RH, 50 °C) environments. The findings revealed porous as-sprayed coatings with paths providing access of the corrosive media to the magnesium substrates. This resulted in galvanic corrosion at the substrate/coating interfaces and formation of magnesium corrosion products, which eventually led to coating spalling in the case of salt fog tests after protracted times of exposure. The application of a cold-pressing post-treatment improved the corrosion performance of the coatings. Thus, in high humidity atmosphere, corrosion signs were only visible at the Al/SiC interfaces in the outermost surface of the coatings and, in salt fog environment, the galvanic corrosion of the substrates was delayed.

[1]  B. Luan,et al.  Protective coatings on magnesium and its alloys — a critical review , 2002 .

[2]  S. Fishman,et al.  Corrosion of aluminum-matrix composites. Status report , 1983 .

[3]  L. Chiu,et al.  Improvement of corrosion properties in an aluminum-sprayed AZ31 magnesium alloy by a post-hot pressing and anodizing treatment , 2005 .

[4]  H. Pokhmurska,et al.  Post-treatment of thermal spray coatings on magnesium , 2008 .

[5]  B. Torres,et al.  Corrosion resistance of thermally sprayed Al and Al/SiC coatings on Mg , 2009 .

[6]  J. Majumdar,et al.  Laser composite surfacing of a magnesium alloy with silicon carbide , 2003 .

[7]  Robert J. Mckay,et al.  Corrosion resistance of metals and alloys , 1936 .

[8]  R. Arrabal,et al.  Corrosion behaviour of Mg–Al alloys with Al–11Si thermal spray coatings , 2009 .

[9]  T. Xiong,et al.  Effect of α-Al2O3 on the properties of cold sprayed Al/α-Al2O3 composite coatings on AZ91D magnesium alloy , 2009 .

[10]  Barbe Gerard.  Application of thermal spraying in the automobile industry , 2006 .

[11]  L. Chiu,et al.  Effect of Aluminum Coatings on Corrosion Properties of AZ31 Magnesium Alloy , 2003 .

[12]  A. Coy,et al.  Correlation between the surface chemistry and the atmospheric corrosion of AZ31, AZ80 and AZ91D magnesium alloys , 2009 .

[13]  H Friedrich,et al.  Research for a new age of magnesium in the automotive industry , 2001 .

[14]  H. Pokhmurska,et al.  Tailored Surfaces by Means of Thermal Spraying and Post-Treatment , 2008 .

[15]  C. Leygraf,et al.  Atmospheric corrosion of field exposed magnesium alloy AZ91D , 2008 .

[16]  R. Arrabal,et al.  Corrosion Behavior of Mg-Al Alloys with Aluminum Thermal Spray Coatings in Humid and Saline Environments , 2009 .

[17]  K. Bobzin,et al.  Investigation of HVOF spraying on magnesium alloys , 2006 .

[18]  F. Viejo,et al.  Corrosion protection of Mg/Al alloys by thermal sprayed aluminium coatings , 2009 .

[19]  A. Coy,et al.  Corrosion behaviour of Mg/Al alloys with composite coatings , 2009 .

[20]  J. Rams,et al.  Microstructure and wear resistance of Al-SiC composites coatings on ZE41 magnesium alloy , 2009 .