Advances in Electrical Machine, Power Electronic, and Drive Condition Monitoring and Fault Detection: State of the Art
暂无分享,去创建一个
Gérard-André Capolino | Jose A. Antonino-Daviu | Martin Riera-Guasp | J. Antonino-Daviu | G. Capolino | M. Riera-Guasp
[1] Janusz Nieznanski,et al. Open-Transistor Fault Diagnostics in Voltage-Source Inverters by Analyzing the Load Currents , 2007, IEEE Transactions on Industrial Electronics.
[2] Gérard-André Capolino,et al. Advances in Diagnostic Techniques for Induction Machines , 2008, IEEE Transactions on Industrial Electronics.
[3] Domenico Casadei,et al. Magnets faults characterization for Permanent Magnet Synchronous Motors , 2009, 2009 IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives.
[4] Jorge O. Estima,et al. A new approach for real-time multiple open-circuit fault diagnosis in voltage source inverters , 2010 .
[5] Afshin Izadian,et al. Application of Kalman filters in model-based fault diagnosis of a DC-DC boost converter , 2010, IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society.
[6] Miguel Delgado Prieto,et al. Feature Extraction of Demagnetization Faults in Permanent-Magnet Synchronous Motors Based on Box-Counting Fractal Dimension , 2011, IEEE Transactions on Industrial Electronics.
[7] Subhasis Nandi,et al. Detection of Eccentricity Faults in Induction Machines Based on Nameplate Parameters , 2011, IEEE Transactions on Industrial Electronics.
[8] Selin Aviyente,et al. An EMD-based invariant feature extraction algorithm for rotor bar condition monitoring , 2011, 8th IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives.
[9] Yu Chen,et al. Monitoring and Diagnosis for the DC–DC Converter Using the Magnetic Near Field Waveform , 2011, IEEE Transactions on Industrial Electronics.
[10] Bin Zhang,et al. A Probabilistic Fault Detection Approach: Application to Bearing Fault Detection , 2011, IEEE Transactions on Industrial Electronics.
[11] Daniel U. Campos-Delgado,et al. An Observer-Based Diagnosis Scheme for Single and Simultaneous Open-Switch Faults in Induction Motor Drives , 2011, IEEE Transactions on Industrial Electronics.
[12] Carlo Concari,et al. Toward Practical Quantification of Induction Drive Mixed Eccentricity , 2011, IEEE Transactions on Industry Applications.
[13] T. Habetler,et al. An Impedance Identification Approach to Sensitive Detection and Location of Stator Turn-to-Turn Faults in a Closed-Loop Multiple-Motor Drive , 2011, IEEE Transactions on Industrial Electronics.
[14] Analysis and Diagnosis of Open-Circuit Faults in Matrix Converters , 2011, IEEE Transactions on Industrial Electronics.
[15] Dawei Xiang,et al. An Industry-Based Survey of Reliability in Power Electronic Converters , 2011, IEEE Transactions on Industry Applications.
[16] Shahin Hedayati Kia,et al. Torsional-Vibration Assessment and Gear-Fault Diagnosis in Railway Traction System , 2011, IEEE Transactions on Industrial Electronics.
[17] Leila Parsa,et al. Recent Advances in Modeling and Online Detection of Stator Interturn Faults in Electrical Motors , 2011, IEEE Transactions on Industrial Electronics.
[18] R. Sabourin,et al. Detecting bearing defects under high noise levels: A classifier fusion approach , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.
[19] B. Ponick,et al. Influence of bearing currents on the bearing lifetime for converter driven machines , 2012, 2012 XXth International Conference on Electrical Machines.
[20] P. Gardel,et al. Neural network broken bar detection using time domain and current spectrum data , 2012, 2012 XXth International Conference on Electrical Machines.
[21] J. Kappatou,et al. The influence of the broken bar fault on the magnetic field and electromagnetic torque in 3-phase induction motors , 2012, 2012 XXth International Conference on Electrical Machines.
[22] Gerard-Andre Capolino,et al. A comparative study of acoustic, vibration and stator current signatures for gear tooth fault diagnosis , 2012, 2012 XXth International Conference on Electrical Machines.
[23] Remus Pusca,et al. Study of Rotor Faults in Induction Motors Using External Magnetic Field Analysis , 2012, IEEE Transactions on Industrial Electronics.
[24] Lee Empringham,et al. Fault-Tolerant Matrix Converter Motor Drives With Fault Detection of Open Switch Faults , 2012, IEEE Transactions on Industrial Electronics.
[25] G. Venchi,et al. A novel approach to detect short circuits in low voltage induction motor by stray flux measurement , 2012, 2012 XXth International Conference on Electrical Machines.
[26] H. Tischmacher,et al. Investigations on bearing currents in converter-fed electrical motors , 2012, 2012 XXth International Conference on Electrical Machines.
[27] R. Romary,et al. An improvement of a diagnosis procedure for AC machines using two external flux sensors based on a fusion process with belief functions , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.
[28] S. Hamdani,et al. Rotor fault diagnosis in a Squirrel-Cage Induction Machine using support vector , 2012, 2012 XXth International Conference on Electrical Machines.
[29] Z. Daneshi-Far,et al. Planetary gearbox effects on induction machine in wind turbine: Modeling and analysis , 2012, 2012 XXth International Conference on Electrical Machines.
[30] N. Ertugrul,et al. Negative sequence current compensation for stator shorted turn detection in induction motors , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.
[31] Humberto Pinheiro,et al. New modulation strategy for asymmetrical cascaded multilevel converters under fault conditions , 2012, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.
[32] L. Romeral,et al. Detection of Demagnetization Faults in Surface-Mounted Permanent Magnet Synchronous Motors by Means of the Zero-Sequence Voltage Component , 2012, IEEE Transactions on Energy Conversion.
[33] D. Diallo,et al. SVM based diagnosis of inverter fed induction machine drive: A new challenge , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.
[34] M. Riera-Guasp,et al. Diagnosis of eccentricity in induction machines working under fluctuating load conditions, through the instantaneous frequency , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.
[35] J. F. Martins,et al. Fault detection and diagnosis of grid-connected power inverters using PCA and current mean value , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.
[36] Y. Khan,et al. Performance of inverter fed induction motor under open circuit DC link capacitor , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.
[37] Luis Romeral,et al. Shaft Trajectory Analysis in a Partially Demagnetized Permanent-Magnet Synchronous Motor , 2013, IEEE Transactions on Industrial Electronics.
[38] Marcin Wolkiewicz,et al. On-line neural network-based stator fault diagnosis system of the converter-fed induction motor drive , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.
[39] M. Nemec,et al. Induction motor parameters in case of rotor electrical asymmetry , 2013, 2013 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD).
[40] Teresa Orlowska-Kowalska,et al. Simple sensorless diagnosis method for open-switch faults in SVM-VSI-fed induction motor drive , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.
[41] J. C. Kappatou,et al. The zero-sequence current spectrum as an on-line static eccentricity diagnostic mean in Δ-connected PSH-induction motors , 2013, 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED).
[42] A. J. M. Cardoso,et al. Recent advances in fault diagnosis by Park's vector approach , 2013, 2013 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD).
[43] Hubert Razik,et al. Detection and Diagnosis of Faults in Induction Motor Using an Improved Artificial Ant Clustering Technique , 2013, IEEE Transactions on Industrial Electronics.
[44] Ruoyu Li,et al. Plastic Bearing Fault Diagnosis Based on a Two-Step Data Mining Approach , 2013, IEEE Transactions on Industrial Electronics.
[45] Gérard Champenois,et al. New Expressions of Symmetrical Components of the Induction Motor Under Stator Faults , 2013, IEEE Transactions on Industrial Electronics.
[46] Antoine Picot,et al. Improvements on lifespan modeling of the insulation of low voltage machines with response surface and analysis of variance , 2013, 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED).
[47] Jordi-Roger Riba,et al. Inter-turn fault detection in five-phase pmsms. Effects of the fault severity , 2013, 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED).
[48] Alessandro Goedtel,et al. Bearing fault detection using relative entropy of wavelet components and artificial neural networks , 2013, 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED).
[49] R. Puche-Panadero,et al. Diagnosis of induction motor faults using a DSP and advanced demodulation techniques , 2013, 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED).
[50] Yantao Song,et al. Survey on Reliability of Power Electronic Systems , 2013, IEEE Transactions on Power Electronics.
[51] T. J. Sobczyk,et al. Mathematical modeling of eccentricities in induction machines by the mono-harmonic model , 2013, 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED).
[52] Y. Gritli,et al. Full detection of high-resistance connections in multiphase induction machines , 2013, 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED).
[53] Claude Delpha,et al. A global approach for the classification of bearing faults conditions using spectral features , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.
[54] A. M. S. Mendes,et al. The performance of a three-phase induction motor fed by a three-level NPC converter with fault tolerant control strategies , 2013, 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED).
[55] Athanasios N. Safacas,et al. Detection of Backlash Phenomena Appearing in a Single Cement Kiln Drive Using the Current and the Electromagnetic Torque Signature , 2013, IEEE Transactions on Industrial Electronics.
[56] Gian Carlo Montanari,et al. Partial discharge measurements in electrical machines controlled by variable speed drives: From design validation to permanent PD monitoring , 2013, 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED).
[57] Lorand Szabo,et al. Bearing faults detection in induction machines based on statistical processing of the stray fluxes measurements , 2013, 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED).
[58] R. Romary,et al. Electrical machines fault diagnosis by stray flux analysis , 2013, 2013 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD).
[59] S. Caux,et al. On-line inter-turn short-circuit detection in permanent magnet synchronous generators , 2013, 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED).
[60] Mohammad Reza Zolghadri,et al. Open- and Short-Circuit Switch Fault Diagnosis for Nonisolated DC–DC Converters Using Field Programmable Gate Array , 2013, IEEE Transactions on Industrial Electronics.
[61] Thomas G. Habetler,et al. Using Only the DC Current Information to Detect Stator Turn Faults in Automotive Claw-Pole Generators , 2013, IEEE Transactions on Industrial Electronics.
[62] António J. Marques Cardoso,et al. A New Algorithm for Real-Time Multiple Open-Circuit Fault Diagnosis in Voltage-Fed PWM Motor Drives by the Reference Current Errors , 2013, IEEE Transactions on Industrial Electronics.
[63] Antero Arkkio,et al. Combined FE and two dimensional spectral analysis of broken cage faults in induction motors , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.
[64] Jang-Mok Kim,et al. Fault Diagnosis of DC-Link Capacitors in Three-Phase AC/DC PWM Converters by Online Estimation of Equivalent Series Resistance , 2013, IEEE Transactions on Industrial Electronics.
[65] Chrysostomos D. Stylios,et al. An intelligent icons approach for rotor bar fault detection , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.
[66] Lie Xu,et al. Improvement of the Hilbert Method via ESPRIT for Detecting Rotor Fault in Induction Motors at Low Slip , 2013, IEEE Transactions on Energy Conversion.
[67] Guy Clerc,et al. Statistical and Neural-Network Approaches for the Classification of Induction Machine Faults Using the Ambiguity Plane Representation , 2013, IEEE Transactions on Industrial Electronics.
[68] E. G. Strangas. Response of electrical drives to gear and bearing faults — Diagnosis under transient and steady state conditions , 2013, 2013 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD).
[69] Robert W. Cox,et al. Online algorithm for early stage fault detection in IGBT switches , 2013, 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED).
[70] F. Filippetti,et al. Condition monitoring and diagnosis of rotor faults in induction machines: State of art and future perspectives , 2013, 2013 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD).
[71] Gérard-André Capolino,et al. Wound-Rotor Induction Generator Inter-Turn Short-Circuits Diagnosis Using a New Digital Neural Network , 2013, IEEE Transactions on Industrial Electronics.
[72] Vicente Climente-Alarcon,et al. Bar breakage mechanism and prognosis in an induction motor , 2013, 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED).
[73] W. P. Cao,et al. Onboard condition monitoring of solder fatigue in IGBT power modules , 2013, 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED).
[74] Sauro Longhi,et al. Induction motor fault detection and diagnosis using KDE and Kullback-Leibler divergence , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.
[75] M. F. Cabanas,et al. Detection of stator winding insulation failures: On-line and off-line tests , 2013, 2013 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD).
[76] Guillaume Gateau,et al. Real-Time Monitoring for a Five-Level Double-Boost Power Factor Controller Including Postfault Reconfiguration , 2013, IEEE Transactions on Industrial Electronics.
[77] Luca Zarri,et al. Detection and Localization of Stator Resistance Dissymmetry Based on Multiple Reference Frame Controllers in Multiphase Induction Motor Drives , 2013, IEEE Transactions on Industrial Electronics.
[78] H. Henao,et al. Efficient digital signal processing techniques for induction machines fault diagnosis , 2013, 2013 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD).
[79] Shahin Hedayati Kia,et al. Gear tooth surface damage fault profile identification using stator current space vector instantaneous frequency , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.
[80] Wei Qiao,et al. Bearing Fault Diagnosis for Direct-Drive Wind Turbines via Current-Demodulated Signals , 2013, IEEE Transactions on Industrial Electronics.
[81] Daniel Zurita,et al. Intelligent sensor based on acoustic emission analysis applied to gear fault diagnosis , 2013, 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED).
[82] R. Puche-Panadero,et al. Diagnosis of induction machines under non-stationary conditions: Concepts and tools , 2013, 2013 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD).
[83] Ilkka Vaalasranta,et al. Power MOSFET failure and degradation mechanisms in flyback topology under high temperature and high humidity conditions , 2013, 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED).
[84] António J. Marques Cardoso,et al. Open-Circuit Fault Diagnosis in PMSG Drives for Wind Turbine Applications , 2013, IEEE Transactions on Industrial Electronics.
[85] Gérard-André Capolino,et al. Advanced Diagnosis of Electrical Faults in Wound-Rotor Induction Machines , 2013, IEEE Transactions on Industrial Electronics.
[86] Carlo Concari,et al. Validation of a Faulted Rotor Induction Machine Model With an Insightful Geometrical Interpretation of Physical Quantities , 2013, IEEE Transactions on Industrial Electronics.
[87] Osama A. Mohammed,et al. Inter-Turn Fault Detection in PM Synchronous Machines by Physics-Based Back Electromotive Force Estimation , 2013, IEEE Transactions on Industrial Electronics.
[88] Mario Vasak,et al. Stator-Current Spectrum Signature of Healthy Cage Rotor Induction Machines , 2013, IEEE Transactions on Industrial Electronics.
[89] Konstantinos N. Gyftakis,et al. Evaluation of the broken bar fault detectability depending on the rotor bar number , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.
[90] Giansalvo Cirrincione,et al. Bearing Fault Detection by a Novel Condition-Monitoring Scheme Based on Statistical-Time Features and Neural Networks , 2013, IEEE Transactions on Industrial Electronics.
[91] G. Clerc,et al. Long-term prediction of bearing condition by the neo-fuzzy neuron , 2013, 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED).
[92] Pascal Maussion,et al. Electrical Aging of the Insulation of Low-Voltage Machines: Model Definition and Test With the Design of Experiments , 2013, IEEE Transactions on Industrial Electronics.
[93] Shahin Hedayati Kia,et al. Gear tooth surface damage fault detection using induction machine electrical signature analysis , 2013, 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED).
[94] Alberto Bellini,et al. Bearing Fault Model for Induction Motor With Externally Induced Vibration , 2013, IEEE Transactions on Industrial Electronics.
[95] Humberto Henao,et al. Trends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques , 2014, IEEE Industrial Electronics Magazine.
[96] Humberto Henao,et al. Diagnosis of Rotor and Stator Asymmetries in Wound-Rotor Induction Machines Under Nonstationary Operation Through the Instantaneous Frequency , 2014, IEEE Transactions on Industrial Electronics.
[97] Jose A. Antonino-Daviu,et al. Transient diagnosis of induction generators via atom-based time-frequency transforms , 2014, 2014 International Conference on Electrical Machines (ICEM).
[98] Vicente Climente-Alarcon,et al. Induction Motor Diagnosis by Advanced Notch FIR Filters and the Wigner–Ville Distribution , 2014, IEEE Transactions on Industrial Electronics.
[99] Leila Parsa,et al. A Generalized Fault-Tolerant Control Strategy for Five-Phase PM Motor Drives Considering Star, Pentagon, and Pentacle Connections of Stator Windings , 2014, IEEE Transactions on Industrial Electronics.