Shielding Characterization of Metallic Enclosures With Multiple Slots and a Thin-Wire Antenna Loaded: Multiple Oblique EMP Incidences With Arbitrary Polarizations
暂无分享,去创建一个
Ming-Feng Xue | Jun-Fa Mao | Wen-Yan Yin | Qing-Huo Liu | Qi-Feng Liu | W. Yin | J. Mao | M. Xue | Qi-Feng Liu | Qing H. Liu
[1] S. Yokoyama,et al. Thin Wire Representation in Finite Difference Time Domain Surge Simulation , 2002, IEEE Power Engineering Review.
[2] Wen-Yan Yin,et al. Perfectly matched layer implementation using bilinear transform for microwave device applications , 2005 .
[3] Z.A. Khan,et al. Shielding effectiveness of metallic enclosures at oblique and arbitrary polarizations , 2005, IEEE Transactions on Electromagnetic Compatibility.
[4] Richard Lai,et al. A 140-GHz monolithic low noise amplifier , 1987, IEEE Microwave and Guided Wave Letters.
[5] Rosemary A. Renaut,et al. HIRF penetration and PED coupling analysis for scaled fuselage models using a hybrid subgrid FDTD(2,2)/FDTD(2,4) method , 2003 .
[6] Jun-Fa Mao,et al. Accurate Characterization of Shielding Effectiveness of Metallic Enclosures With Thin Wires and Thin Slots , 2009, IEEE Transactions on Electromagnetic Compatibility.
[7] Constantine A. Balanis,et al. HIRF penetration through apertures: FDTD versus measurements , 2001 .
[8] Ruey-Beei Wu,et al. An improved formalism for FDTD analysis of thin-slot problems by conformal mapping technique , 2003 .
[9] Allen Taflove,et al. FD-TD modeling of digital signal propagation in 3-D circuits with passive and active loads , 1994 .
[10] T. Konefal,et al. A fast circuit model description of the shielding effectiveness of a box with imperfect gaskets or apertures covered by thin resistive sheet coatings , 2006, IEEE Transactions on Electromagnetic Compatibility.
[11] C.E. Baum,et al. Survey of worldwide high-power wideband capabilities , 2004, IEEE Transactions on Electromagnetic Compatibility.
[12] Tatsuo Itoh,et al. Full-wave analysis of packaged microwave circuits with active and nonlinear devices: an FDTD approach , 1997 .
[13] P. Ciampolini,et al. Accurate and efficient circuit simulation with lumped-element FDTD technique , 1996 .
[14] Roberto Sorrentino,et al. A new algorithm for the incorporation of arbitrary linear lumped networks into FDTD simulators , 1999 .
[15] M. Camp,et al. Predicting the breakdown behavior of microcontrollers under EMP/UWB impact using a statistical analysis , 2004, IEEE Transactions on Electromagnetic Compatibility.
[16] V. Rajamani,et al. Validation of modal/MoM in shielding effectiveness studies of rectangular enclosures with apertures , 2006, IEEE Transactions on Electromagnetic Compatibility.
[17] M. Camp,et al. Parameter estimation of double exponential pulses (EMP, UWB) with least squares and Nelder Mead algorithm , 2004, IEEE Transactions on Electromagnetic Compatibility.
[18] Bing-Zhong Wang. Enhanced thin-slot formalism for the FDTD analysis of thin-slot penetration , 1995 .
[19] S. Gedney. An anisotropic perfectly matched layer-absorbing medium for the truncation of FDTD lattices , 1996 .
[20] Allen Taflove,et al. Computational Electrodynamics the Finite-Difference Time-Domain Method , 1995 .
[21] Richard Holland,et al. Implementation of the Thin-Slot Formalism in the Finite-Difference EMP Code THREDII , 1981, IEEE Transactions on Nuclear Science.