Definition of an empirical relation to estimate the overstrength factor of dissipative zones for global mechanism collapsing structures

[1]  Vincenzo Piluso,et al.  Validation of a Design Procedure for Failure Mode Control of EB-Frames: Push-Over and IDA Analyses , 2013 .

[2]  Vincenzo Piluso,et al.  Probabilistic Theory of Plastic Mechanism Control for Steel Moment Resisting Frames , 2019, Structural Safety.

[3]  Vincenzo Piluso,et al.  The Use of TPMC for Designing MRFs Equipped with FREEDAM Connections: Performance Evaluation , 2018 .

[4]  Vincenzo Piluso,et al.  Seismic design of chevron braces cupled with MRF fail safe systems , 2015 .

[5]  Giuseppe Mancini,et al.  Seismic reliability-based robustness assessment of three-dimensional reinforced concrete systems equipped with single-concave sliding devices , 2018 .

[6]  Vincenzo Piluso,et al.  A critical review of plastic design approaches for failure mode control of steel moment resisting frames , 2017 .

[7]  F. Mazzolani,et al.  PLASTIC DESIGN OF SEISMIC RESISTANT STEEL FRAMES , 1997 .

[8]  Vincenzo Piluso,et al.  Influence of connection typology on seismic response of MR‐Frames with and without ‘set‐backs’ , 2017 .

[9]  Vincenzo Piluso,et al.  Modelling of floor joists contribution to the lateral stiffness of RC buildings designed for gravity loads , 2016 .

[10]  Vincenzo Piluso,et al.  STOCHASTIC APPROACH FOR THEORY OF PLASTIC MECHANISM CONTROL , 2017 .

[11]  Raffaele Landolfo,et al.  Behaviour factor (q) evaluation the CFS braced structures according to FEMA P695 , 2017 .

[12]  Vincenzo Piluso,et al.  Moment frames – concentrically braced frames dual systems: analysis of different design criteria , 2016 .

[13]  M. Fardis,et al.  Designer's guide to EN 1998-1 and en 1998-5 Eurocode 8: Design of structures for earthquake resistance; general rules, seismic actions, design rules for buildings, foundations and retaining structures/ M.Fardis[et al.] , 2005 .

[14]  Elide Nastri,et al.  Performance evaluation of a seismic retrofitted R.C. precast industrial building , 2017 .

[15]  Raffaele Landolfo,et al.  Experimental investigation of seismic behaviour of low dissipative CFS strap-braced stud walls , 2016 .

[16]  Bungale S. Taranath,et al.  Seismic Provisions for Structural Steel Buildings, ANSI/AISC 341-10 , 2016 .

[17]  Paolo Castaldo,et al.  The Dissipative Column: A New Hysteretic Damper , 2015 .

[18]  Vincenzo Piluso,et al.  Seismic reliability assessment of a two-story steel-concrete composite frame designed according to Eurocode 8 , 2009 .

[19]  Vincenzo Piluso,et al.  Influence of the bracing scheme on seismic performances of MRF-EBF dual systems , 2017 .

[20]  Rosario Montuori,et al.  Smart and simple design of seismic resistant reinforced concrete frame , 2017 .

[21]  Rosario Montuori,et al.  The use of steel rbs to increase ductility of wooden beams , 2018, Engineering Structures.

[22]  Vincenzo Piluso,et al.  Advances in theory of plastic mechanism control: closed form solution for MR‐Frames , 2015 .

[23]  Vincenzo Piluso,et al.  Theory of plastic mechanism control: State-of-the-art , 2015 .

[24]  R. Landolfo,et al.  FINITE ELEMENT ANALYSES ON FREE FROM DAMAGE SEISMIC RESISTING BEAM-TO-COLUMN JOINTS , 2017 .

[25]  O. Ditlevsen.  Narrow Reliability Bounds for Structural Systems , 1979 .

[26]  Vincenzo Piluso,et al.  Influence of homoschedasticity hypothesis of structural response parameters on seismic reliability of CB-frames , 2011 .

[27]  Michael N. Fardis.  BOOK REVIEW: "SEISMIC RELIABILITY ANALYSIS OF STRUCTURES", by P. E. PINTO, R. GIANNINI and P. FRANCHIN , 2012 .

[28]  Rosario Montuori,et al.  A general design procedure for failure mechanism control of reinforced concrete frames , 2016 .

[29]  M. De Iuliis,et al.  Effects of deep excavation on seismic vulnerability of existing reinforced concrete framed structures , 2014 .

[30]  C A Cornell,et al.  A PROBABILITY BASED STRUCTURAL CODE , 1969 .

[31]  Vincenzo Piluso,et al.  Theory of Plastic Mechanism Control for MRF–EBF dual systems: Closed form solution , 2016 .

[32]  Vincenzo Piluso,et al.  The Use of TPMC for Designing MRFs Equipped with FREEDAM Connections: A Case Study , 2018 .

[33]  Raffaele Landolfo,et al.  Seismic design criteria for Chevron CBFs: European vs North American codes (Part-1) , 2017 .

[34]  L. Tirca,et al.  Comparative Response of Earthquake Resistant CBF Buildings Designed According to Canadian and European Code Provisions , 2018 .

[35]  Luís Simões da Silva,et al.  High strength steel in chevron concentrically braced frames designed according to Eurocode 8 , 2016 .

[36]  Enrico Tubaldi,et al.  Influence of ground motion characteristics on the optimal single concave sliding bearing properties for base-isolated structures , 2018 .

[37]  Raffaele Landolfo,et al.  Seismic design of extended stiffened end-plate joints in the framework of Eurocodes , 2017 .

[38]  Raffaele Landolfo,et al.  Seismic design criteria for chevron CBFs: Proposals for the next EC8 (part-2) , 2017 .