Perovskite solar cell-thermoelectric tandem system with a high efficiency of over 23%

Abstract Photovoltaic-thermoelectric (PV-TE) tandem system has been considered as a viable approach to fully exploit solar energy by making full use of both solar light and solar heat generation. Herein, we demonstrate an efficient perovskite solar cell (PSC)-thermoelectric (TE) hybrid system with four-terminal configuration. To balance the light-to-electricity and heat-to-electricity efficiency and ultimately realize high solar energy conversion efficiency, we performed both simulation and experiment by tuning the bandgap of top PSC. Using perovskite with a composition of CH3NH3Pb(I0.95Br0.05)3 (band gap: 1.61 eV), we achieved a state-of-the-art efficiency of over 23%, with 18.3% from the PSC and the rest contributed by heat conversion using TE module. Our work proves that the low-grade heat produced by PSCs can be recovered and utilized by thermoelectric modules, and provides a promising route to improve the utilization rate of solar radiation based on PSCs.

[1]  Laura M. Herz,et al.  Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber , 2013, Science.

[2]  Sergei Tretiak,et al.  High-efficiency solution-processed perovskite solar cells with millimeter-scale grains , 2015, Science.

[3]  Juan J. Diaz Leon,et al.  Fully textured monolithic perovskite/silicon tandem solar cells with 25.2% power conversion efficiency , 2018, Nature Materials.

[4]  Heping Shen,et al.  New insights into the origin of hysteresis behavior in perovskite solar cells. , 2018, Physical chemistry chemical physics : PCCP.

[5]  Yue Hu,et al.  Efficient Perovskite Photovoltaic‐Thermoelectric Hybrid Device , 2018 .

[6]  Xuewen Yin,et al.  CH3NH3PbI3 grain growth and interfacial properties in meso-structured perovskite solar cells fabricated by two-step deposition , 2017, Science and technology of advanced materials.

[7]  Henry J. Snaith,et al.  Efficient planar heterojunction perovskite solar cells by vapour deposition , 2013, Nature.

[8]  Ning Wang,et al.  Iodide-reduced graphene oxide with dopant-free spiro-OMeTAD for ambient stable and high-efficiency perovskite solar cells , 2015 .

[9]  Tsutomu Miyasaka,et al.  Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. , 2009, Journal of the American Chemical Society.

[10]  Qiang Luo,et al.  Working from Both Sides: Composite Metallic Semitransparent Top Electrode for High Performance Perovskite Solar Cells. , 2016, ACS applied materials & interfaces.

[11]  Choongho Yu,et al.  Lossless hybridization between photovoltaic and thermoelectric devices , 2013, Scientific Reports.

[12]  K. Catchpole,et al.  Rubidium Multication Perovskite with Optimized Bandgap for Perovskite‐Silicon Tandem with over 26% Efficiency , 2017 .

[13]  Yangying Zhou,et al.  Perovskite solar cells: must lead be replaced – and can it be done? , 2018, Science and technology of advanced materials.

[14]  Arun Mishra,et al.  Evaluation of physics-based numerical modelling for diverse design architecture of perovskite solar cells , 2017 .

[15]  Yecheng Zhou,et al.  A numerical model for charge transport and energy conversion of perovskite solar cells. , 2016, Physical chemistry chemical physics : PCCP.

[16]  Shiwei Lin,et al.  Preparation of aluminum doped zinc oxide films with low resistivity and outstanding transparency by a sol–gel method for potential applications in perovskite solar cell , 2016 .

[17]  Yimin Xuan,et al.  A novel choice for the photovoltaic–thermoelectric hybrid system: the perovskite solar cell , 2016 .

[18]  L. P. Bulat,et al.  Thermal-photovoltaic solar hybrid system for efficient solar energy conversion , 2006 .

[19]  J. Noh,et al.  Chemical management for colorful, efficient, and stable inorganic-organic hybrid nanostructured solar cells. , 2013, Nano letters.

[20]  Li Han,et al.  A novel high-performance photovoltaic–thermoelectric hybrid device , 2011 .

[21]  Heping Shen,et al.  Aluminum-Doped Zinc Oxide as Highly Stable Electron Collection Layer for Perovskite Solar Cells. , 2016, ACS applied materials & interfaces.

[22]  K. Catchpole,et al.  Metal halide perovskite: a game-changer for photovoltaics and solar devices via a tandem design , 2018 .

[23]  Rongrong Cheacharoen,et al.  Towards enabling stable lead halide perovskite solar cells; interplay between structural, environmental, and thermal stability , 2017 .

[24]  D. Oron,et al.  Enhancing the Performance of Perovskite Solar Cells by Hybridizing SnS Quantum Dots with CH3 NH3 PbI3. , 2017, Small.

[25]  Jia-Min Shieh,et al.  Hybrid Cd‐free CIGS solar cell/TEG device with ZnO nanowires , 2015 .

[26]  Hong Lin,et al.  Preheating-assisted deposition of solution-processed perovskite layer for an efficiency-improved inverted planar composite heterojunction solar cell , 2016 .

[27]  Z. Pei,et al.  Hole transit in P3HT:PCBM solar cells with embedded gold nanoparticles , 2014 .

[28]  Xudong Xiao,et al.  Mechanically-stacked perovskite/CIGS tandem solar cells with efficiency of 23.9% and reduced oxygen sensitivity , 2018 .

[29]  Matteo Chiesa,et al.  Photovoltaic-thermoelectric hybrid systems: A general optimization methodology , 2008 .

[30]  M. Dresselhaus,et al.  High-Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys , 2008, Science.

[31]  Yanhong Luo,et al.  Hybrid tandem solar cell for concurrently converting light and heat energy with utilization of full solar spectrum , 2010 .

[32]  A. Ortiz-Conde,et al.  New method to extract the model parameters of solar cells from the explicit analytic solutions of their illuminated I–V characteristics , 2006 .

[33]  Yangying Zhou,et al.  High Efficiency Inverted Planar Perovskite Solar Cells with Solution-Processed NiOx Hole Contact. , 2017, ACS applied materials & interfaces.

[34]  H. Yin,et al.  Energy Conversion Efficiency of a Novel Hybrid Solar System for Photovoltaic, Thermoelectric, and Heat Utilization , 2011, IEEE Transactions on Energy Conversion.

[35]  Nripan Mathews,et al.  Current progress and future perspectives for organic/inorganic perovskite solar cells , 2014 .

[36]  K. Jiang,et al.  Cross-stacked superaligned carbon nanotube electrodes for efficient hole conductor-free perovskite solar cells , 2016 .

[37]  A. Boyer,et al.  Properties of thin film thermoelectric materials: application to sensors using the Seebeck effect , 1992 .