MICROSYSTEMS FOR ENERGY HARVESTING Invited Paper

This paper reviews the state of the art in miniature microsystems for harvesting energy from external environmental vibration, and describes two specific microsystems developed at the University of Michigan. One of these microsystems allows broadband harvesting of mechanical energy from extremely low frequency (1-5 Hz) random vibrations abundant in civil infrastructure, such as bridges. These parametric frequency increased generators have a combined operating range covering two orders of magnitude in acceleration (0.54-19.6 m/s 2 ) and a frequency range spanning up to 60Hz, making them some of the most versatile harvesters in existence. The second of these systems is an integrated microsystem for harvesting energy from periodic vibrations at moderate frequencies (50-400 Hz) typically present in devices such as motors or transportation systems. This harvester utilizes a thinned-PZT structure to produce 2.74 µW at 0.1 g (167 Hz) and 205 µW at 1.5 g (154 Hz) at resonance. Challenges in the design of electronic circuitry (integrated or hybrid) for regulating the scavenged energy are briefly discussed.

[1]  K. Najafi,et al.  Thinned-PZT on SOI process and design optimization for piezoelectric inertial energy harvesting , 2011, 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference.

[2]  R. B. Yates,et al.  Development of an electromagnetic micro-generator , 2001 .

[3]  E. Thomsen,et al.  MEMS-based thick film PZT vibrational energy harvester , 2011, 2011 IEEE 24th International Conference on Micro Electro Mechanical Systems.

[4]  T. Galchev.  Energy Scavenging From Low Frequency Vibrations. , 2010 .

[5]  H. Wikle,et al.  The design, fabrication and evaluation of a MEMS PZT cantilever with an integrated Si proof mass for vibration energy harvesting , 2008 .

[6]  C. K. Lee,et al.  Piezoelectric MEMS generators fabricated with an aerosol deposition PZT thin film , 2009 .

[7]  Khalil Najafi,et al.  A piezoelectric frequency-increased power generator for scavenging low-frequency ambient vibration , 2010, 2010 IEEE 23rd International Conference on Micro Electro Mechanical Systems (MEMS).

[8]  Y. V. Andel,et al.  Vibration energy harvesting with aluminum nitride-based piezoelectric devices , 2009 .

[9]  Khalil Najafi,et al.  A Parametric Frequency Increased Power Generator for Scavenging Low Frequency Ambient Vibrations , 2009 .

[10]  Khalil Najafi,et al.  A CMOS-compatible piezoelectric vibration energy scavenger based on the integration of bulk PZT films on silicon , 2010, 2010 International Electron Devices Meeting.

[11]  Robert Puers,et al.  Fabrication, modelling and characterization of MEMS piezoelectric vibration harvesters , 2008 .

[12]  K. Najafi,et al.  A VIBRATION HARVESTING SYSTEM FOR BRIDGE HEALTH MONITORING APPLICATIONS , 2010 .

[13]  Jan M. Rabaey,et al.  A study of low level vibrations as a power source for wireless sensor nodes , 2003, Comput. Commun..

[14]  Khalil Najafi,et al.  A self-supplied inertial piezoelectric energy harvester with power-management IC , 2011, 2011 IEEE International Solid-State Circuits Conference.

[15]  Saibal Roy,et al.  A micro electromagnetic generator for vibration energy harvesting , 2007 .

[16]  V. Pop,et al.  First autonomous wireless sensor node powered by a vacuum-packaged piezoelectric MEMS energy harvester , 2009, 2009 IEEE International Electron Devices Meeting (IEDM).

[17]  Timothy C. Green,et al.  Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices , 2008, Proceedings of the IEEE.

[18]  Skandar Basrour,et al.  VIBRATION ENERGY HARVESTING WITH PZT THIN FILM MICRO DEVICE , 2009 .